Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Adelanto, CA | Riverside Gate Company
We provide independent Ghost Controls gate repair across Adelanto, CA, and the thing that makes our work here different is simple: we diagnose the High Desert first. Solar charge controllers failing from sand-scoured panels, posts shifting after wind events, grit-packed rollers on long driveway gates. That’s the Adelanto reality, and it’s usually not the motor. Call (855) 942-4867 for a free estimate on any Ghost Controls operator, from the TDS dual-swing series to solar-charged slide gate kits on large parcels.
Why Adelanto Residents Choose Us for Ghost Controls Service
We work on the brand you have, and we’ve been doing it long enough to know exactly where Ghost Controls operators break in Adelanto. Not in theory. On real gates, on real parcels, with real High Desert conditions beating on the hardware. The solar-and-battery health is the front-line diagnosis on nearly every call here, because running grid power to a gate at the end of a long dirt driveway off the flat margins just isn’t practical for most properties. So when the gate stops opening, the answer is usually the charge controller, the deep-cycle battery, or a post that’s drifted out of plumb, not a dead arm.
Neil Dravecky has spent the better part of three decades working on gates and automated entry systems across the Inland Empire, and he’ll tell you the same thing: “If a gate’s giving you trouble, there’s a reason – we just have to find it.” That’s the approach we bring to every Ghost Controls service call in Adelanto. We’re a dedicated gate company, not a handyman who also does gates. From the motor to the control board, we handle the electrical and mechanical complexity that generalists routinely decline or misdiagnose.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Adelanto
- Solar charge controllers failing early. Blowing sand scours the panel face, and the intense High Desert sun cooks deep-cycle batteries faster than the controller can manage. The operator runs fine on grid power but dies on solar. We test the full charge circuit, not just the battery.
- Actuator arms binding after wind events. Adelanto’s persistent spring winds carry sand and dust, but the real problem is soil shift. When a hinge post creeps out of plumb, the Ghost Controls arm geometry binds and trips the limit switch. The operator gets blamed for what’s really a settled or shallow-set post.
- Grit-packed rollers and tracks on sliding gates. Wind-driven sand gets into every roller, every track, every hinge pin on chain-link and tube-steel gates. The operator runs over current, trips, or faults. We clean and re-lubricate the running gear, then re-square the gate so the motor isn’t fighting itself.
- Wiring and control board corrosion. Long driveway runs in Adelanto often mean exposed conduit or shallow burial. Intense UV cracks the jacket, sand gets in, and the board terminates corroded connections. We trace every wire on the run, not just the operator end.
- Remote and keypad work but the gate reverses halfway. This is almost always a physical obstruction or a limit switch misalignment, not the board. A wind event bumps the gate out of position, the limits misread, and the operator reverses. We re-set travel and re-square the frame.
Ghost Controls Service in Adelanto: What Local Conditions Mean for Your Equipment
Adelanto’s flat, wind-scoured High Desert margins mean most Ghost Controls operators here sit on long driveway gates on large parcels where running grid power to the gate is impractical. That’s the defining fact of this market. So solar-and-battery health is the front-line diagnosis on nearly every call, not just a fallback when the arm stops moving. We got a call on a large horse property off the flat margins near the 92301 ZIP line where a Ghost Controls dual-swing operator on a long driveway gate had stopped opening after a spring wind event. Our tech found the control board fine but the charge controller reading a sun-baked deep-cycle battery as fully dead, and the gate’s hinge post had shifted enough that the arm was binding and tripping limits. We re-set and re-squared the post, reset the swing arm travel, and replaced the battery with a load-tested unit. The operator ran clean and the gate is back to full swing.
That’s the pattern here. The gate itself is usually the problem, not the operator. Out-of-square frames, sagging posts, mismatched hardware on owner-built gates from the 1980s and 1990s. Hinges seizing with grit, latches fading under intense UV. We repair the Ghost Controls equipment, yes, but we also fix the gate it’s mounted on, because a new operator on a failing gate is a waste of your money and ours.
Ghost Controls Models & Products We Service in Adelanto
We service the full Ghost Controls line: the Heavy-Duty Dual Swing TDS series with solar charging, the Single Swing TS/AX series on driveway and perimeter gates, solar-charged operator kits on remote large-lot gates, and slide-gate operators on owner-built tube-steel and chain-link gates. For parts, we use Ghost Controls OEM boards, arm assemblies, and solar/charge components where they carry the load, and quality aftermarket batteries, rollers, and hardware for wear items where OEM adds cost without extra life. We stock the common items locally so your Adelanto service call doesn’t wait on a parts shipment. See our full Ghost Controls sales & service coverage for details.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Adelanto
Ghost Controls service calls in Adelanto start at $65 for diagnostics, which is credited toward the repair if you proceed. Actuator arm replacement typically runs $180 to $400. Solar charge controller replacement runs $120 to $300, and deep-cycle battery replacement runs $150 to $350 installed. Limit switch adjustment and realignment runs $100 to $250 per gate. Control board replacement for the TDS series runs $220 to $480. Every price is quoted and agreed before any work starts. That’s our policy, no exceptions. Call (855) 942-4867 for an exact quote on your Ghost Controls gate repair in Adelanto – estimates are free.
Serving Adelanto, CA — Our Local Coverage Area
We’re based in the Adelanto area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Adelanto
Usually not. What you’re describing is almost always a battery or charge controller issue. In Adelanto, the sun bakes deep-cycle batteries faster than the controller can compensate, and blowing sand grimes the panel face. We test the full charge circuit before touching the motor. Call (855) 942-4867 and we’ll diagnose it on-site.
No. The operator cannot compensate for a post that’s out of plumb. We re-set and re-square the post first, then reset the arm travel and limits. If you try to adjust the operator around a shifted post, you’ll burn through actuators and still have a gate that doesn’t close right. We fix the gate, then the operator.
Yes, and it’s one of the most common Ghost Controls failures in Adelanto. Sand packs into the rollers and track, the gate drags, and the motor trips on over current. The fix is cleaning and re-lubricating the running gear, then re-squaring the gate so it moves freely. A grimy track is not a board problem.
That’s a limit switch or obstruction issue, not the electronics. Something bumped the gate out of position, probably a wind event or a drifted post, and the limits are misreading. We re-set the travel and re-square the frame. Quick fix, usually same visit. Call (855) 942-4867 and we’ll take a look.
Yes. We repair unless the actuator or control board is genuinely burnt out or the gate frame is beyond re-squaring. In Adelanto, a lot of these gates are owner-built from tube steel and chain-link, and they can run for years with proper hinge repair, post re-setting, and battery replacement. We’ll tell you straight if a new operator won’t fix a failing gate.
Service Areas Near Adelanto
We also provide Ghost Controls service to nearby High Desert and mountain communities, including Trabuco Canyon, Portola Hills, Lake Arrowhead, La Verne, Foothill Ranch, and Running Springs. If you’re in the Adelanto service area or a neighboring zip, call us. We also cover Ghost Controls service in Camp Pendleton North and Ghost Controls service in Aguanga.
Book Your Ghost Controls Service in Adelanto Today
Call (855) 942-4867 to schedule your Ghost Controls gate repair in Adelanto. We offer free estimates, and same-day service is often available for urgent repairs. Tell us what the gate’s doing, and we’ll tell you what it needs.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Adelanto and the High Desert.