Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Orange, CA
Gate installation in Orange, CA runs between $2,400 and $11,000 for a complete automatic gate system, with most driveway gates landing in the $3,800 to $7,500 range depending on the operator brand and gate material. We’re Riverside Gate Company, a gate-exclusive specialist serving Orange since 2011. Most of the installation work we do in Orange replaces gates that have failed on older wood or wrought-iron fence lines in Old Towne and the ranch tracts around it, not blank-slate new construction.
Call (855) 942-4867 for a free measure and a written price before any work starts.
Why Orange Homes Are Different
Orange is an old citrus town turned suburban city, and that history shows up in every gate we touch. A large share of the gates we repair and replace in Orange hang on aging wood and wrought-iron fences in the historic Old Towne district and the 1950s and 60s ranch tracts around it. That means the defining local call is re-hanging and re-welding vintage ironwork or replacing sun-split wooden posts, not installing brand-new automated systems on fresh fencing.
The climate drives a lot of this. Hot, dry inland summers and the Santa Ana wind events each fall dry out and warp wood gates and accelerate rust on iron hardware. The mild winters mean gates get used year-round, so hinges and latches wear out faster than they would in a coastal city. In Old Towne’s historic core, replacement gates and ironwork often must echo the Craftsman-era look, so our techs routinely re-weld and re-hang original ornamental iron instead of swapping it for modern prefab. Meanwhile, the newer subdivisions on the north and east sides of Orange have vinyl, CMU, and newer ornamental iron, which brings a different set of install considerations around post mounting and operator compatibility.
Styles & brands we work with
Our Main Orange Services
Two service calls dominate Orange: mechanical gate repair for aging wood and iron gates, and electric gate repair for the automated systems on newer homes and commercial properties.
Gate Repair in Orange
When a gate in Orange sags, drags, or won’t latch, it’s usually rusted hinges, a warped wooden post, or a weld that gave out on vintage ironwork. We repair the gate in place whenever possible. That means re-welding ornamental iron, re-setting posts in new concrete, or re-hanging a gate that has pulled away from a tired frame. We work on the brand you have, and we carry hinges, latch hardware, and post anchors sized for the older gate styles common in Orange. Read more on our Gate Repair in Orange page.
Electric Gate Repair in Orange
Automatic gates fail in specific ways in Orange. Santa Ana winds push gates past their travel limits, which throws limit switches and strips gears on the operator. Heat dries out capacitor packs on older control boards. We diagnose from the motor to the control board, and we stock parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite operators. This is our defined specialty, not an afterthought. Details are on our Electric Gate Repair in Orange page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Orange
Gate installation in Orange typically costs $2,400 to $11,000, with most automatic driveway gates falling between $3,800 and $7,500. The job involves matching the new gate to the property’s era – a Craftsman-style iron gate in Old Towne, a clean ornamental steel gate on a north Orange subdivision lot – then setting posts deep enough to hold up under Santa Ana wind loads. We handle the full Gate Installation scope in-house: gate fabrication, post setting, operator mounting, and wiring.
Automatic Gate Installation
Signs you need it
You’re still opening the gate by hand, the existing operator has failed and replacement parts for that brand are no longer available, or the gate has sagged enough that no operator will cycle it reliably anymore.
What it costs in Orange
A complete automatic gate installation in Orange runs $3,500 to $11,000 depending on whether the job is a new gate with a mid-range operator or a heavier commercial-grade system on a sliding track.
How we do it
We measure the opening, pull the old gate and operator, set new posts in concrete below the frost and wind-load depth, hang the gate, mount the operator, run the power and safety loops, then program travel limits and remotes.
Driveway Gate Installation
Signs you need it
The existing driveway gate has rusted through at the hinge plates, the wooden gate has split beyond re-hanging, or you want a driveway gate that actually closes and locks instead of just marking the property line.
What it costs in Orange
A single driveway gate installation in Orange is $2,400 to $7,700 for a steel or wood gate without automation, and $4,000 to $11,000 when paired with an operator.
How we do it
We set steel posts in concrete, hang the gate with adjustable hinges so it can be trued after settling, install the latch and optional operator, and match the finish to the fence line or house trim.
What Gate Installation Costs in Orange
| Item | Typical range in Orange |
|---|---|
| Basic swing gate (single, no automation) | $2,400 – $5,500 |
| Automatic gate system with operator | $3,800 – $7,700 |
| Heavy sliding gate with commercial operator | $5,500 – $11,000 |
Does a new automatic gate in Orange need a permit?
Most gate installations in Orange don’t require a building permit when the gate is on existing fence lines and isn’t altering the primary structure. What does matter is operator safety compliance: photo eyes and reverse sensors are mandatory on any automated gate. Always check with the City of Orange planning desk before we start, but in practice most of our installs proceed without a permit.
Can you install a gate on an existing wood fence in Old Towne?
That’s the most common install we do in Orange. We typically cut the fence section back, set a steel post in concrete behind the wood post, and mount the gate to that steel core. The wood post remains cosmetic, the steel carries the load. Call (855) 942-4867 for a free measure.
Brands We Service in Orange
We work on the brand you have. In Orange, that most often means LiftMaster and FAAC on newer automatic gates, BFT and Viking on commercial sliding and barrier systems, and Linear, Mighty Mule, Ghost Controls, DoorKing, and Elite across the rest. Our techs carry common control boards, remotes, and limit switches for all nine brands, and we can usually source any part within a day if it isn’t on the truck. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Orange, CA
| Service | Typical range in Orange |
|---|---|
| Gate repair (hinge, latch, post reset) | $185 – $600 |
| Electric gate troubleshooting and diagnostic | $125 – $350 |
| Control board replacement (parts and labor) | $450 – $1,100 |
| Operator motor replacement | $650 – $1,600 |
| Limit switch or safety sensor replacement | $150 – $400 |
| Single swing gate installation (no automation) | $2,400 – $5,500 |
| Automatic gate system with operator | $3,800 – $7,700 |
| Sliding gate with commercial operator | $5,500 – $11,000 |
The biggest price drivers in Orange are the condition of the existing posts and the era of the fence line. Old Town posts are often rotted below grade, which means digging and re-setting before any new gate goes on, and Santa Ana exposure can push us to a heavier post and gate frame than the same job in a sheltered lot. Every quote is written, itemized, and agreed to before any work starts, so the number we give you on the phone is the ceiling, not the starting point.
Neighborhoods We Serve in Orange
Riverside Gate Company serves all of Orange, and most of our calls cluster in the older housing stock where gates have seen decades of use. We’re regularly in Old Towne, the ranch tracts off Chapman and Tustin Avenues, and the newer subdivisions in the hills on the east side of town. Typical response for repair calls in Orange is same-day or next-morning, and installation estimates are scheduled within the week.
- Old Towne Orange
- Orange Park Acres
- Mabury Park
- El Modena
- North Orange
Service Area – Cities Near Orange
Riverside Gate Company is based in Riverside and serves Orange plus the surrounding communities, including Villa Park, CA, North Tustin, CA, Tustin, CA, and Anaheim, CA. So if you’re just over the city line, you’re still in our regular service territory and you’ll get the same gate-exclusive specialist response as every Orange call.
Serving Orange, CA — Our Local Coverage Area
We’re based in the Orange area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Orange
Yes. Same-day repair dispatch is standard for Orange, and we keep our truck stock directed at the failures we see most in this city: rusted hinge welds on iron gates, warped wood posts, and operator boards cooked by inland heat. Call (855) 942-4867 before noon and we can typically have a tech on site by late afternoon.
Some of the neighborhood associations in north and east Orange have architectural review requirements for visible front gates, and Old Towne has historic-district design guidelines that sometimes require a Craftsman-style gate and ironwork. We work with those review standards regularly and can quote the gate to match the required style before you submit anything to the board.
We handle the complete job. The gate, the operator, the control board, the wiring run from the panel to the operator, the safety loops, and the programming. You’re not coordinating two contractors or waiting for an electrician to finish before the gate goes on. That’s the point of a gate-exclusive specialist.
Riverside Gate Company has served Orange since 2011. When your gate has failed, call (855) 942-4867 for a free estimate. We quote the price before any work starts, and we fix the gate you have or install the gate you need.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Orange Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Jennifer Rhodes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Bethany Meyer"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Rohan Sharma