Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Costa Mesa, CA
Gate installation in Costa Mesa runs between $1,800 and $9,500 for most residential jobs, and a full commercial automatic system can reach $25,000 or more. The price spreads that wide because this city mixes 1950s alley-loaded homes with low-clearance carport openings and newer South Coast Metro properties with wide, automated driveway entrances. Riverside Gate Company has served Costa Mesa since 2011, and we work on the systems that actually exist here, from vintage strap-hinge gates to modern FAAC and BFT operators. Call (855) 942-4867 for a free estimate.
Why Costa Mesa Homes Are Different
Costa Mesa’s gate work is split between two distinct built environments that sit within a few miles of each other. The Westside and Eastside tracts in 92627 were built fast in the 1950s and 1960s. Many of those homes still have their original wood or welded steel gates hanging on strap hinges, with narrow driveways and alley-facing carports that leave very little room for a modern operator arm. A tech who only installs new equipment will struggle here; the work often means field-fabricating a bracket to fit non-standard post spacing or a hinge that hasn’t been manufactured in decades.
Cross over to the neighborhoods around South Coast Metro in 92626 and the job changes completely. Those properties tend to have wider setbacks, larger lots, and a mix of apartment complexes and commercial buildings with heavy sliding gates and full access control systems. The marine layer off the coast means salt-laden damp air settles on steel and hinge hardware year-round, so rust prevention and hardware grade matter more than freeze-thaw concerns. When the Santa Ana winds kick up, they stress gate frames and operator arms, which is why we check wind-load hardware on every Costa Mesa job, not just coastal ones.
Styles & brands we work with
Our Main Costa Mesa Services
Costa Mesa homeowners and property managers call us for two things above all else: a gate that has stopped moving or an electric gate that won’t respond to its opener or keypad. These are also the two services that general repair companies routinely misdiagnose, because the problem is rarely just mechanical.
Gate Repair in Costa Mesa
A sagging gate on a 1960s Westside home is usually a hinge or post problem, not an operator problem. We see decades-old strap hinges that have ovaled out their mounting holes, welded steel frames that have rusted through at the bottom rail, and posts that have shifted in the sandy soil. We bring the right hardware and the right fix, whether that means re-welding a frame, re-hanging a gate on new hinges, or squaring a post that has leaned. For the full breakdown of what a repair involves and what it costs, see our dedicated Gate Repair in Costa Mesa page.
Electric Gate Repair in Costa Mesa
When an automatic gate opens halfway and stops, or the keypad does nothing, the fault is usually in the control board, the motor capacitor, the safety edge, or the power supply. We troubleshoot electric and automatic gate systems from the motor to the control board, and we stock parts for the brands Costa Mesa actually runs: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Costa Mesa’s damp coastal air is hard on exposed control boards, so we see corrosion-related failures that a dry-climate tech would never encounter. Get the complete picture on our Electric Gate Repair in Costa Mesa page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Costa Mesa
New gate installation in Costa Mesa usually costs between $1,800 and $9,500 for residential work, and we quote that price in writing before any work starts. Most Costa Mesa jobs fall into one of two categories: replacing a worn 1950s or 1960s gate on an older tract home, where the opening is often non-standard, or installing a new automatic system on a larger lot or commercial property near South Coast Metro. The climate here means we recommend powder-coated steel or properly sealed wood over raw iron, because the marine layer will have an untreated gate rusting within a couple of years. Visit our Gate Installation hub to see the full scope of what we handle.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close a gate every time you come or go, or your property needs controlled access that a manual gate can’t provide.
What it costs in Costa Mesa
Automatic gate installation in Costa Mesa typically runs $3,500 to $12,000, including the operator, gate, safety devices, and labor.
How we do it
We measure the opening, confirm the gate weight and wind load, set the posts in concrete, hang and balance the gate, then mount, wire, and program the operator and safety edges.
Electric Gate Installation
Signs you need it
You want keypad or remote access on an existing gate, or you’re building a gate that needs to open automatically from day one.
What it costs in Costa Mesa
Electric gate installation in Costa Mesa ranges from $2,800 to $8,500 for a single residential swing or slide system with one operator and basic access controls.
How we do it
We run a dedicated power circuit to the gate, install the operator and control board, wire photo eyes and safety edges to code, and program remotes and keypads on site.
Driveway Gate Installation
Signs you need it
Your driveway is unprotected or your existing gate has failed structurally, and you want a permanent barrier that looks right on the house.
What it costs in Costa Mesa
Driveway gate installation in Costa Mesa generally falls between $2,500 and $9,500 depending on gate width, material, and whether automation is included.
How we do it
We survey the driveway and gate posts, fabricate or order the gate to fit the exact opening, set or reinforce the posts, and hang the gate with hardware rated for the site conditions.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your setback is too tight for a swing gate, or you need a gate that doesn’t require clearance space to arc open.
What it costs in Costa Mesa
Sliding gate installation in Costa Mesa typically costs $4,000 to $14,000, with commercial cantilever systems running higher.
How we do it
We pour a track or set cantilever rollers, install the gate on its carriage, align the run, and mount the operator with the required safety sensors and stops.
What Gate Installation Costs in Costa Mesa
| Item | Typical range in Costa Mesa |
|---|---|
| Manual gate installation (residential) | $1,800 – $5,500 |
| Automatic gate installation (single operator) | $3,500 – $12,000 |
| Sliding gate installation (residential/commercial) | $4,000 – $14,000 |
Installation prices in Costa Mesa move with three things: gate width and weight, the condition of the existing posts, and whether the property needs a new power run to the gate. We walk every site before quoting, and the price we put in writing is the price you pay. No labor surprises after the fact.
How long does gate installation take in Costa Mesa?
Most residential gate installations take one to two days on site, plus a short lead time to fabricate or order the gate. We schedule the concrete and electrical work around your property’s access needs.
Do I need a permit to install a gate in Costa Mesa?
Most repairs and like-for-like replacements don’t require a permit, but new automatic gate installations often do, especially where electrical work and safety devices are involved. We can tell you what your specific project needs and handle the required documentation.
Brands We Service in Costa Mesa
We work on the brand you have. In Costa Mesa we carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, from entry-level residential operators to commercial-grade FAAC and BFT units. Stocking boards and arms locally keeps most repairs to a single visit. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Costa Mesa, CA
| Service | Typical range in Costa Mesa |
|---|---|
| Gate repair (hinges, posts, welding) | $180 – $550 |
| Electric gate repair (control board, motor, safety edge) | $250 – $950 |
| Manual gate installation | $1,800 – $5,500 |
| Automatic gate installation | $3,500 – $12,000 |
| Sliding gate installation | $4,000 – $14,000 |
| Electric gate installation | $2,800 – $8,500 |
| Driveway gate installation | $2,500 – $9,500 |
In Costa Mesa, rust remediation and bracket fabrication on older Westside gates can add to a repair bill, and a long power run from the house to a new automatic gate is the most common installation cost driver. Whatever the job, we quote the full price before work begins, and that number doesn’t change unless the scope changes and you approve it in writing first.
Neighborhoods We Serve in Costa Mesa
We cover all of Costa Mesa, including the ZIP codes 92626, 92627, and 92628. Most calls in this area get a same-week appointment, and we keep emergency slots open for gate failures that leave a property unsecured or a vehicle blocked.
- Westside Costa Mesa
- Eastside Costa Mesa
- Mesa Verde
- South Coast Metro
- College Park
Service Area – Cities Near Costa Mesa
Riverside Gate Company covers Costa Mesa and the surrounding Orange County cities. We’re a regular presence in Newport Beach, CA for coastal properties with heavy salt exposure, Fountain Valley, CA for mid-century tracts with aging original gates, Huntington Beach, CA for both residential and commercial automatic systems, and San Joaquin Hills, CA for larger lots with long driveway runs.
Serving Costa Mesa, CA — Our Local Coverage Area
We’re based in the Costa Mesa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Costa Mesa
Most Costa Mesa repair calls are scheduled within the same week, and we prioritize emergency calls for gates that won’t close or secure a property. Call (855) 942-4867 and we’ll give you a straight answer on the soonest available slot.
Yes. Many Costa Mesa communities, especially the condo associations near South Coast Metro, have specific gate standards and approval processes. We work with those requirements daily and can coordinate with your HOA from the first site visit through final inspection.
Usually, yes. We identify the operator, board, and hardware on site, and we stock parts for all nine brands we service. Even if the original installer is long gone, we can diagnose the system and get it running again.
If your gate is sagging, stuck, or dead at the keypad in Costa Mesa, call Riverside Gate Company at (855) 942-4867 for a free estimate. We’ll tell you what’s wrong, what it costs, and how long the fix takes before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Costa Mesa Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Jennifer Rhodes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Bethany Meyer"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Rohan Sharma