Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Campo, CA
Gate installation in Campo, CA means building for wind, dust, and long gravel driveways – not for a tidy HOA subdivision. Riverside Gate Company has served Campo since 2011, and we install automatic, swinging, and sliding gates on ranch acreage along SR-94 and the side roads where the housing stock is older, custom, and often hand-built. Whether you need a new electric gate on a manufactured-home parcel or a heavy slide gate for a truck entrance, call (855) 942-4867 for a free estimate.
Why Campo Homes Are Different
Campo sits at roughly 3,000 feet in San Diego County’s inland high-desert backcountry, and the homes reflect that. Most properties are large parcels – ranch homes, manufactured homes, and custom builds off SR-94 – with long dirt or gravel driveways instead of short suburban approaches. Gates here are typically welded steel or pipe, often decades old, and built for function rather than curb appeal. The hot, dry summers and cold winter nights stress every moving part. Strong sustained winds crossing open ranch land push hard against unsupported gate spans, and the seasonal Santa Ana events make it worse. We see hinges pulled out of square, latch posts leaning, and openers fighting wind loads they were never sized for. Campo also has no single, dominant HOA pattern; most gates are on private parcels, which means fewer design restrictions but more responsibility on the owner to keep the entrance safe and operational.
Styles & brands we work with
Our Main Campo Services
Most Campo calls to Riverside Gate Company come down to two things: a gate that will not open or close properly, and the electrical system that drives it. Here is what each involves and where to go for the full Campo-specific page.
Gate Repair in Campo
Gate repair in rural Campo usually means correcting what wind, dry rot, and dust have done to hinges, posts, latches, and spans. We weld, brace, and re-hang gates that have sagged or been pulled out of alignment by sustained winds. If the gate is older steel or pipe, we can usually repair the existing structure rather than replace it. Learn what we see most often and what it costs on the Gate Repair in Campo page.
Electric Gate Repair in Campo
Electric gate repair here is about diagnosing motors, control boards, and safety edges on systems exposed to high-desert dust and cold nights. We work on the full electrical side, from the motor to the control board, and we service the brand you have, including FAAC, Viking, LiftMaster, Linear, BFT, Ghost Controls, DoorKing, Elite, and Mighty Mule. The full Campo-specific breakdown is on the Electric Gate Repair in Campo page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Campo
Gate installation in Campo, CA means building for wind, dust, and long gravel driveways – not for a tidy HOA subdivision. Homes here sit on acreage along SR-94 and the side roads, and most driveways are long dirt or gravel runs where a gate has to handle trucks, livestock, and sustained high-desert wind. We size and install gates to survive those conditions and to hold up under electric openers that run in dust and cold winter nights. Because we handle both the gate and the automation, you never need a second contractor, and every landscape is different. When you are ready, start at our Gate Installation page for the full breakdown of how we build a new gate system.
Automatic Gate Installation
Signs you need it
You are tired of getting out of the truck to open a heavy ranch gate, or you need controlled access on a parcel where anything from livestock to delivery trucks comes through.
What it costs in Campo
In Campo, automatic gate installation typically runs from $2,800 to $8,500, depending on gate size, opener type, and power access.
How we do it
We measure the driveway width, check for buried utilities, set steel posts in concrete, hang the gate, install the opener, and run the wiring for safety edges and access controls.
Driveway Gate Installation
Signs you need it
The property has a long dirt or gravel driveway with no current gate, or the old entrance was not built for the width of modern trucks and trailers.
What it costs in Campo
For a driveway gate installation in Campo, budget roughly $2,400 to $6,300 for the gate, posts, and hinges, before any automation.
How we do it
We set posts below frost line, hang the gate with adjustable hinges so it can be re-squared as soil shifts, and ensure the swing clears the gravel crown in both directions.
What Gate Installation Costs in Campo
| Item | Typical range in Campo |
|---|---|
| Automatic gate installation | $2,800 – $8,500 |
| Driveway gate installation | $2,400 – $6,300 |
| Sliding gate installation | $3,200 – $9,000 |
How long does a Campo gate installation take?
Most residential gate installations are finished in one to two days. Ranch entrances with long power runs, heavy slide gates, or extensive concrete work can add another day.
Do I need a permit for a gate installation in Campo?
Setback and access requirements vary by parcel, and some county rules apply to driveway entrances off SR-94. We can talk through what is needed on your specific property during the estimate.
Brands We Service in Campo
We carry repair parts and diagnostic tools for the major gate automation brands found across Campo, including FAAC, BFT, Linear, and Viking. Because we are a gate-exclusive company, the parts we stock are specific to gate motors and control boards, not a hardware-store grab bag. That means less waiting on delivery and a faster turnaround when your opener is down. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Campo, CA
| Service | Typical range in Campo |
|---|---|
| Gate repair and basic hinge or latch work | $190 – $550 |
| Automatic gate opener repair | $290 – $780 |
| Control board replacement | $380 – $900 |
| Gate motor replacement | $550 – $1,650 |
| Automatic gate installation | $2,800 – $8,500 |
| Driveway gate installation | $2,400 – $6,300 |
| Sliding gate installation | $3,200 – $9,000 |
| Electric gate repair service call | $120 – $350 |
What pushes price up in Campo is usually the same list: long power runs to a gate at the bottom of a dirt driveway, heavy wind loads on a wide opening, and structural repairs to posts that have been pulled out of plumb by years of weather. Whatever the job, our quote is agreed before any work starts – no surprise line items on an invoice after the fact.
Neighborhoods We Serve in Campo
Campo is not a street-grid town; it is a scatter of ranch parcels and rural residences along SR-94 and the adjoining back roads. We serve the whole 91906 ZIP, including the areas below. Typical response for a service call anywhere in the Campo area is same day or next morning, and we schedule new installations on a measured, written-quote basis rather than promising a same-day build.
- Campo proper along SR-94
- Lake Morena area
- Boulevard side roads
- Pine Valley adjacent parcels
- Backcountry ranch acreage east of town
Service Area – Cities Near Campo
Riverside Gate Company covers Campo and the surrounding mountain and backcountry communities. We regularly work in Pine Valley, CA, Descanso, CA, Alpine, CA, and Harbison Canyon, CA. If you are on the edge of the 91906 ZIP or just over the line, call us, and we will confirm coverage for your exact parcel.
Serving Campo, CA — Our Local Coverage Area
We’re based in the Campo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Campo
For a gate that will not open or close, we can usually be on site the same day or next morning. Installations and new builds are quoted and scheduled, not dispatched on a rush basis. Call (855) 942-4867 and we will tell you what the schedule looks like for your part of Campo.
Most repairs to an existing gate do not need a permit. A full replacement or new entrance may touch county setback or driveway access rules, especially if it fronts SR-94. We can check your parcel before any work begins.
No. Riverside Gate Company is a gate-exclusive company, so every call we take in Campo is within our core specialty. That means the technician shows up with gate parts, gate tools, and gate automation knowledge, not a generalist’s guess. Our home page explains what we do across Southern California.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Campo Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— David Wong"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Ramon Herrera"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Sofia Martinez