Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Fullerton
Electric gate repair in Fullerton typically runs $180 – $340 for most motor, control board, and safety sensor issues, with same-day service available across the 92833, 92834, 92835, and 92836 ZIP codes. We work on the brand you have, whether it’s a LiftMaster on a 1960s tract home east of the 57 or a FAAC operator feeding a commercial lot off Commonwealth. Call (855) 942-4867 and we’ll have a gate specialist headed your way.
Riverside Gate Company is a gate-exclusive repair company led by Neil Dravecky. We don’t do fences, garage doors, or general handyman work. We diagnose and fix automatic gate systems, from the motor to the control board, and we know Fullerton’s older blocks well enough to anticipate what’s failing before we even pull the panel off.
Why Riverside Gate Company Is Fullerton’s Preferred Electric Gate Repair Company
Most of our Fullerton calls come from referrals in the 92831 and 92832 ZIPs, where homeowners with pre-1950 gates have learned the hard way that a generalist who “also does gates” will misdiagnose the problem and quote a replacement the house doesn’t need. We show up with gate-specific parts on the truck: hinge post footings, matched vintage hardware, safety photocell kits, and control boards for nine major brands.
Our response time to Fullerton is consistently under two hours for emergency calls, and we carry enough inventory to handle most repairs in a single visit. When a LiftMaster operator trips out on a sagging wrought-iron swing gate off Harbor Boulevard, we don’t order parts and hope. We fix the hinge post, re-align the gate, and get the operator running again before we leave.
Neil Dravecky built this company around a gate-only focus for a reason. When you call a gate specialist, every job is within the technician’s core competency. No learning on your dime. No upselling unrelated services. Just the repair, done correctly, with the price quoted and agreed before any work starts.
Styles & brands we work with
Electric Gate Motor in Fullerton
Electric gate motor work in Fullerton is our most common call, and in the older neighborhoods near downtown we regularly find the motor is actually fine while the hinge post it’s mounted to has rotted at grade or shifted out of alignment. A typical motor swap runs $450 – $850 installed, but we always check the post footing and gate alignment before condemning a motor, because replacing a motor on a failing post just burns up the new one.
Motor Replacement and Alignment
When a motor does need replacing, we match the operator to the gate’s weight, swing arc, and how often it cycles. A lightweight pool gate in a 92834 backyard uses a different motor than a 600-pound driveway gate on a shared right of way in 92831. We do not guess at any of this.
Control Board and Sensor Diagnostics
If the motor hums but doesn’t move, or the gate reverses for no reason, the control board and safety sensors are the usual suspects. We test inputs and outputs at the board level before recommending replacement, and we quote the repair before any work begins.
Gate Access Control in Fullerton
Gate access control in Fullerton covers everything from a simple keypad at a single-family driveway off Bastanchury Road to a full telephone-entry and card-reader system at a commercial lot near Cal State Fullerton. Most residential keypad and remote-control repairs run $150 – $400, while a complete access-control package with new keypad, receiver, and two remotes typically lands between $600 and $1,200 depending on how many credentials the system supports.
Keypad, Remote, and Intercom Systems
When a keypad stops opening the gate but the remote still works, the keypad’s wireless receiver has usually failed, not the gate motor. We can replace the receiver and re-pair existing remotes without ripping out the whole system. For landed properties with older intercoms, we can integrate the gate operator with a modern phone-based entry system so tenants and delivery drivers get access without you handing out physical remotes.
Commercial Access and Traffic Control
Fullerton commercial properties, especially light industrial buildings along the Orangethorpe and Kimberly corridors, need access systems that log every entry and restrict after-hours traffic. We service FAAC, BFT, and DoorKing operators with loop detectors, card readers, and timed relay controls, and we keep those systems working so your tenant’s trucks don’t sit outside a dead gate at 6 a.m.
Trusted Brands We Service in Fullerton
We work on nine gate automation brands, and unlike a general contractor we carry parts and diagnostic knowledge for every one of them. If your Fullerton home has a FAAC, BFT, Linear, or Viking operator, we can repair it on the same day in most cases. That matters when a control board fails and the gate is stuck open. From entry-level Mighty Mule and Ghost Controls systems on residential side gates to heavy-duty FAAC and BFT commercial operators, we handle the full range under one roof. No “we don’t work on that brand” and no two-week wait for a third-party vendor.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Fullerton Homes
- Rotted hinge posts on pre-1950 gates. In the 92831 and 92832 ZIPs, original wrought-iron and wood picket gates often sit on posts that have spent 70 years absorbing Fullerton’s sun. The wood rots at grade, the post shifts, and the gate drags or fails to close. We re-set the post on a new footing and match the original hardware.
- Swing gates where a slide gate is the only workable fit. Shared driveways and narrow rights-of-way off downtown’s older blocks leave no room to swing a gate open. We convert swing gates to rack-and-pinion slide gates so the driveway stays completely usable during and after the repair.
- Santa Ana wind damage to wood posts. Each fall, dry north winds snap old wooden gate posts along the north Fullerton hills. The operator gets blamed, but the post failed first. We see this pattern every October through December and stock post footings accordingly.
- Operators tripping due to shifted post footings. On 1950s and 60s tract homes east and south of downtown, the gate operator gets blamed for tripping when the real problem is that the post footing has shifted and the gate is binding against the operator’s force limit. We correct the gate geometry before touching the motor.
Pricing for Electric Gate Repair in Fullerton, CA
| Service | Typical Fullerton Cost |
|---|---|
| Electric gate motor replacement | $450 – $850 |
| Control board replacement | $200 – $550 |
| Keypad and remote system repair | $150 – $400 |
| Safety sensor replacement and alignment | $120 – $260 |
| Hinge post reset and footing | $350 – $900 |
| Swing-to-slide gate conversion | $1,800 – $4,500 |
These are the ranges we quote in Fullerton, not statewide averages you’ll find on a generic home-advisor site. What moves the number is the gate’s weight, the operator brand, whether the post needs a new footing, and whether we’re matching vintage hardware in a historic-preservation zone. Every price is quoted and agreed before any work starts. Call (855) 942-4867 for a free estimate, and we’ll give you the number before we touch a wrench.
We Also Serve Cities Near Fullerton
If you’re in Anaheim, La Habra, Placentia, or Brea, our Electric Gate Repair team covers those areas too. We dispatch the same gate-only specialists to every city, so the brand range and diagnostic depth don’t change just because the ZIP code does. For anything outside Fullerton, check our service area or call (855) 942-4867 and we’ll tell you straight if we can get there.
Serving Fullerton, CA — Our Local Coverage Area
We’re based in the Fullerton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Fullerton
Yes, if the gate is visible from the street and sits within a designated historic district or on a property with preservation overlay restrictions, repairs that change the gate’s appearance or hardware may need design-review approval. Matching original ironwork styles and hardware usually keeps the job within the city’s guidelines, and our team has done enough of these repairs to know what the review board will accept. Call (855) 942-4867 if you’re unsure whether your gate triggers review, and we’ll help you figure it out before anything is ordered.
Usually, yes. The problem is almost always a hinge post that has rotted at grade or shifted, not the gate panel itself. We re-set the post on a new footing, correct the sag, and re-align the operator so the gate swings cleanly over the shared right of way. In tight shared driveways where a swing gate can’t physically clear, we convert to a slide gate with rack and pinion so the whole driveway stays open. Call (855) 942-4867 for a site assessment.
Santa Ana winds hit the north Fullerton hills hardest every October through December, and decades of sun have already dried and cracked the wood at grade. The wind finishes what the sun started. We see this pattern so consistently that we stock extra post footings and hinge-post hardware every fall, and we recommend checking gate posts each September so a snapped post doesn’t leave the gate inoperable.
Yes, and in Fullerton’s older shared driveways it’s often the only workable layout. We install rack-and-pinion slide gates that run parallel to the fence line, so the driveway stays completely clear for vehicles and pedestrians. The conversion typically runs $1,800 – $4,500 depending on the gate’s length, weight, and whether we need to add a new track or use a cantilever design. We’ll quote the whole job before starting.
After a repair, check that the gate opens and closes without dragging, that the safety photocells reverse the gate when you break the beam, and that the operator’s force setting isn’t pushing hard enough to injure someone. We test all three before we leave, but here’s the important part: gate operators carry enough force to seriously injure a child or pet, and safety sensors and force settings are not something to adjust by feel. Let a trained gate technician handle those settings. Call (855) 942-4867 if anything feels off after we leave, and we’ll come back and correct it.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Fullerton electric gate repair for residential and commercial properties.