Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across San Bernardino
Electric gate repair in San Bernardino typically runs $180 – $340 for common motor and control board fixes, with same-day service available for most breakdowns. Our technicians carry parts for LiftMaster, FAAC, BFT, DoorKing, Ghost Controls, Mighty Mule, and more, so we usually complete repairs on the first visit. If your gate won’t open, won’t close, or the remote stopped responding, call (855) 942-4867 for a free estimate before we come out.
We work in San Bernardino every week, from the 92401 corridors near downtown to the 92404 and 92407 neighborhoods where tract homes and foothill properties present their own gate challenges. This is not a city where a general handyman’s guesswork cuts it. The housing stock here is older, the wind is real, and a lot of gates have survived decades of deferred maintenance. We know what that looks like and we know how to fix it properly.
Why Riverside Gate Company Is San Bernardino’s Preferred Electric Gate Repair Company
We’re a dedicated gate company, not a general contractor who occasionally touches a gate motor. That distinction matters in San Bernardino, where mid-century tract homes and rehabbed foreclosure properties often have gates that were patched together by previous owners. Our technicians diagnose the full system, from the control board to the hinge posts, instead of swapping a part and hoping.
Neil Dravecky leads our team with a gate-exclusive focus. Every job we take in San Bernardino is within our core competency, which means no learning on your dime. We arrive with the right tools, the right parts, and the specific brand knowledge to handle whatever operator your property has. Whether it’s a residential Mighty Mule that stopped responding or a commercial DoorKing with a dead control board, we’ve seen it before.
Response time to San Bernardino matters when your gate is stuck open or won’t close at all. We prioritize calls in 92401, 92402, 92403, and 92404 based on urgency, and we tell you honestly when we can arrive before you commit to anything.
Styles & brands we work with
Electric Gate Motor in San Bernardino
An electric gate motor in San Bernardino takes a beating from the high-desert heat and the Santa Ana winds that funnel down from the San Bernardino Mountains. When a motor fails, it usually shows up as a humming sound with no movement, a gate that opens halfway and stops, or a burning smell from the operator housing. Homeowners call us when the motor is clearly struggling, and we replace or rebuild it before it burns out completely.
Motor replacement costs in San Bernardino typically range from $450 to $1,400 depending on the brand and whether it’s a residential swing or slide application. A straight motor swap on a Mighty Mule or Ghost Controls system runs on the lower end. A commercial-grade Viking or DoorKing operator, especially one with a larger horsepower requirement, lands higher. The price is quoted and agreed before any work starts, so you’re not surprised by an invoice that climbs after the fact.
Residential Motor Replacement
Most residential gates in San Bernardino use either swing or slide operators. We match the motor to the gate’s weight, length, and duty cycle, not just whatever was bolted on before. If the original motor was undersized for the gate, which we see regularly on older tract homes, the new motor gets specified correctly.
Commercial Operator Service
Gated apartment complexes and industrial lots around San Bernardino demand operators with higher cycle ratings. We service and replace DoorKing, FAAC, and BFT commercial operators, and we stock common control boards locally so a failed commercial gate doesn’t sit dead for days.
Gate Access Control in San Bernardino
Gate access control in San Bernardino means more than the remote that opens your driveway. It includes keypads, phone entry systems, safety photo-eyes, edge sensors, and the control board that ties everything together. When access control fails, you either can’t get in, or worse, the gate won’t reverse when something is in its path, which is a safety issue we take seriously.
Keypad replacement runs $120 – $280 in San Bernardino. Control board diagnostics and replacement typically land between $250 and $650 depending on the operator brand and whether the board needs programming after installation. Photo-eye and safety sensor replacement runs $90 to $220 per sensor. Every price is quoted before we start, with a written line item breakdown so you know exactly what you’re paying for.
Keypad and Remote Programming
We reprogram existing remotes and keypads whenever possible, and we install new ones when the old unit is beyond saving. Many San Bernardino properties still run on the original keypad from the gate’s installation in the 1990s or early 2000s, and those units are often incompatible with newer safety features.
Safety Sensor and Photo-Eye Retrofit
Older gates in San Bernardino frequently lack functioning photo-eyes or edge sensors, especially on properties that changed hands through foreclosure. We retrofit UL 325-compliant entrapment protection on any gate we service. That isn’t an upsell. It’s a code requirement and a basic safety measure.
Trusted Brands We Service in San Bernardino
We work on the brand you have. If your San Bernardino property has an Elite slide operator, a Ghost Controls swing arm, a Mighty Mule from a big-box store, or a DoorKing commercial unit, we service it. Our technicians are trained on nine major gate automation brands, including LiftMaster, FAAC, BFT, and Linear, so you’re not waiting for someone to “figure it out.” We keep common control boards, remotes, and safety sensors stocked for faster local turnaround, and we’re straightforward about when a part is worth repairing versus when replacement is the cheaper path.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in San Bernardino Homes
- Sagging gates at the hinge post: Soil settling and repeated Santa Ana wind gusts pull older posts out of plumb in 92404 and 92405 neighborhoods. The gate sags at the post rather than the panel, which no hinge tightening will fix. We reset the post in a proper concrete footing, not just shim it.
- Obsolete control boards without entrapment protection: Legacy operators from the 1990s often lack working photo-eyes or edge sensors. These boards fail unpredictably, and they don’t meet modern UL 325 safety standards. We either retrofit compatible sensors or replace the board entirely when it can’t support current safety hardware.
- Jerry-rigged fixes from previous owners: Bungee cords, wire wraps, and bent chain-link are common on San Bernardino’s post-foreclosure inventory. These improvisations mask structural damage to posts and hinges. We diagnose what was actually wrong underneath the patch job, then fix the root cause instead of layering on another band-aid.
- Wind-bent slide gates near the foothills: In 92407, a strong Santa Ana gust can bend a chain-link slide gate backward, strip the rack and pinion, or knock the gate off its track. We straighten the rack, reset the gate on its rollers, and secure the post anchors so the next wind event doesn’t repeat the damage.
Pricing for Electric Gate Repair in San Bernardino, CA
Here’s what San Bernardino homeowners can expect to pay. Remote control replacement: $40 – $90 per remote. Keypad replacement: $120 – $280. Safety photo-eye replacement: $90 – $220 per sensor. Control board diagnostics and replacement: $250 – $650. Full motor replacement: $450 – $1,400 depending on brand and application. Hinge post reset with new concrete footing: $300 – $600. These are real ranges for this market, quoted up front and agreed before any work starts.
What moves a price higher is structural damage hidden behind an improvisational fix, a commercial-grade operator, or a gate that needs substantial realignment before new hardware goes on. We never bill a dollar beyond the quote without your sign-off first. Call (855) 942-4867 for a free estimate and we’ll send a written line item breakdown.
We Also Serve Cities Near San Bernardino
Our Electric Gate Repair team works throughout the Inland Empire, including Muscoy, Highland, Loma Linda, and Rialto. If you’re outside San Bernardino proper but still nearby, we’re likely already scheduled in your area during any given week. Electric Gate Repair in San Bernardino is our primary coverage focus, and we extend the same pricing and response standards to all surrounding communities.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in San Bernardino
Most of the time, it can be saved, but the answer depends on what the previous owner was masking. If the gate is fundamentally sound and the posts are still structurally intact, we can replace the operator, reset the hinges, and add proper safety sensors for about the cost of a motor replacement plus a few hours of realignment work. If the posts are rusted through at the base or the gate frame itself is bent beyond straightening, replacement is cheaper than repeated patch repairs. We’ll tell you which side of that line your gate falls on before we touch anything. Call (855) 942-4867 and we’ll assess it on site.
Yes. UL 325 entrapment protection standards require functioning photo-eyes or contact edge sensors on any automatic gate installed or significantly modified since 2001. Many older San Bernardino gates, especially on properties that went through foreclosure, still run on original control boards with no working safety sensors. We retrofit compliant photo-eyes and edge sensors on every gate we service, because a gate that doesn’t reverse on obstruction is a liability on your property. The retrofit is included in our quote before work begins.
A gate that sags at the hinge side means the post itself has moved out of plumb, not that the gate panel is bent. This is common in San Bernardino’s older neighborhoods where decades of soil settling and Santa Ana wind load have worked the post loose. No hinge adjustment fixes it because the problem is below ground. We excavate the post, reset it in new concrete, and re-hang the gate so it swings level again. The fix costs $300 – $600 and stays done.
Yes, and we do this regularly on larger properties where running new conduit to the gate would cost thousands. Ghost Controls and Mighty Mule both make solar-compatible operator kits that work well in San Bernardino’s high-sun climate. You need a properly sized panel and battery bank for the gate’s duty cycle, and the operator should still have a backup power path. We’ll spec the right panel wattage for your gate’s weight and daily cycles, and we handle the full retrofit from motor to control board. Estimates are free.
Bent slide gates and stripped rack and pinion systems. In neighborhoods near the 92407 foothills, wind gusts funnel down the mountain slopes and hit chain-link slide gates broadside. The gate bends backward, the rack pops out of engagement, and the operator either grinds or stalls. We straighten the gate, re-mount the rack, and reinforce the post anchors so the next wind event moves the gate less. If the operator itself was damaged by the stall, we replace it under the same quote before we start. Call (855) 942-4867 to schedule an inspection.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving San Bernardino and the Inland Empire.