Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Yorba Linda
Electric gate repair in Yorba Linda typically runs $180 – $480 for most opener, hinge, and control board fixes, and we’re usually on site within two business days. If you live in the hills around 92887 or on an estate lot off Kellogg Drive, you already know what we know: gates here are heavier, older, and far more custom than anything tract-built. Riverside Gate Company works on the brand you have, from Mighty Mule and Ghost Controls residential swing arms to FAAC and DoorKing commercial operators, and we carry enough parts in our trucks to solve most Yorba Linda gate failures in a single visit. Call (855) 942-4867 for a straight answer and a free estimate.
Key takeaways:
- Yorba Linda gate repairs typically cost $180 – $480; full operator replacement runs $900 – $2,400 depending on gate weight and length.
- We service all nine major gate automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- On Yorba Linda’s hillside lots, a gate that stops closing is frequently a shifted post, not a failed motor. We check footing and alignment first.
- Free estimates. The price you approve before work starts is the price you pay.
Why Riverside Gate Company Is Yorba Linda’s Preferred Electric Gate Repair Company
We’re a dedicated gate company, not a garage door outfit that picked up gate repair as a side service. Every technician who rolls into Yorba Linda works on automatic gate systems exclusively, Monday through Saturday. That focus means we carry the diagnostic tools, control board programmers, and swing arm hardware that general repair crews simply don’t have on the truck. When a homeowner near Bryant Ranch or up in the 92886 hills calls about a gate that won’t open, we don’t send someone who’s learning on their property. We send someone who has already fixed hundreds of gates like theirs.
Neil Dravecky runs Riverside Gate Company, and his rule on every job is simple: diagnose before you quote, and never replace a part you can repair. That matters in Yorba Linda, where so many estate gates are custom-built or retrofitted over decades. A generic parts-runner will sell you a new operator because that’s what the catalog says. We’ll check the post footing, the hinge alignment, and the limit settings first, because on a graded hillside lot, those are usually the actual problem. When Yorba Linda homeowners call us back for their second, third, or fourth gate issue, it’s because the first repair actually stayed fixed.
We serve all three Yorba Linda ZIP codes, 92885, 92886, and 92887, and our Riverside shop is close enough that we’re in Yorba Linda two to three days a week on normal call volume. For stuck-closed or stuck-open emergencies, we’ll tell you honestly when we can be there and what you should do in the meantime. We don’t pad arrival windows to sound impressive. We give you a real time and then hit it.
Styles & brands we work with
Commercial Gate Operator in Yorba Linda
A commercial gate operator in Yorba Linda handles the heavier end of gate automation: slide gates on commercial lots, barrier arms at gated entries, and the high-cycle swing operators you see on estate entries off La Palma Avenue and the business parks near Savi Ranch. These operators run FAAC, BFT, DoorKing, Viking, or LiftMaster internals, and they fail differently than residential units. The motor may be fine while the control board burns out a relay, or the limit switch drifts until the gate slams at the end of its travel. We diagnose the actual fault before recommending anything.
For property managers and business owners in Yorba Linda, a commercial gate that won’t open isn’t a nuisance, it’s a security and access problem. We get that. We quote commercial operator repairs in Yorba Linda honestly: control board replacement runs $350 – $900 depending on the brand and vintage, a new commercial slide operator runs $2,200 – $5,500 installed, and a barrier arm repair is usually $250 – $650. The price is fixed before we start.
Retrofit Versus Replace on Older Commercial Operators
Plenty of Yorba Linda commercial gates were installed 15 to 20 years ago, and the control boards on those units are often discontinued. If we can source a board or retrofit a compatible aftermarket controller safely, we’ll quote it. If the operator is so worn that retrofitting would cost 70% or more of a new unit installed, we’ll tell you that too, in plain numbers. We don’t make the retrofit-or-replace call based on what’s easier for us. We make it based on what keeps your gate running for the next decade.
Access Control Integration
Commercial gates in Yorba Linda often tie into keypads, phone entry systems, or vehicle detection loops. When we repair a commercial operator, we check the full loop-to-operator path so the gate opens when it should and stops when it must. That’s the difference between a gate that works for a week and one that works for years.
Gate Opener Repair in Yorba Linda
Gate opener repair in Yorba Linda usually means one of three things: a swing arm that stopped moving, a slide gate that grinds and stalls, or a keypad and remote that won’t trigger the operator. Most of what we see on Yorba Linda’s large-lot ranch and hillside properties is swing gate work, because those are the gates this community was built around. We service Ghost Controls and Mighty Mule on the residential end, and DoorKing, FAAC, and BFT where the property calls for commercial-grade hardware.
A typical residential opener repair in Yorba Linda costs $180 – $420. That includes diagnosing the fault, replacing the failed part, and re-tuning the open and close limits so the operator isn’t fighting the gate. If your opener is more than 12 to 15 years old and the gearbox or the main board has failed, we’ll quote you both options: repair it now, or replace it with a modern operator that has current entrapment protection. The decision is yours. The numbers are ours to give you straight.
Swing Arm and Actuator Work
On heavy dual swing gates, like the ones on long ranch-style driveways in 92887, the swing arm takes a beating every cycle. Wind load, gate sag, and binding hinges all shorten actuator life. We check the arm mounting, gate travel speed, and closing force on every opener repair so the new part isn’t asked to do a job the gate itself should be doing. If the gate is out of plumb, fixing the opener without fixing the gate is a temporary repair at best.
Remote, Keypad, and Sensor Repair
Sometimes the opener is fine and the actual problem is at the entry point. We replace and program remotes, re-code keypads, and troubleshoot safety photo eyes and edge sensors. On older Yorba Linda gates that predate current UL 325 entrapment standards, we’ll flag it. A lot of homeowners don’t know their 1990s-era gate has no reversing edge. That’s a safety gap, and we won’t fix the opener and stay quiet about the rest.
Trusted Brands We Service in Yorba Linda
We work on the brand you have. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule. All nine. For Yorba Linda homeowners that matters twice over: first, because we don’t push you to buy whatever brand we happen to sell, and second, because we carry repair parts for all of them. If your 20-year-old Elite swing arm needs a limit switch or your Ghost Controls board needs a reprogram, we’re not waiting on a parts distributor in Texas. We’re fixing it. From the motor to the control board, this is what we do every day, and we do it in Yorba Linda often enough that we know these gates before we even open the panel.
Common Electric Gate Repair Problems We See in Yorba Linda Homes
- Settled hinge posts on graded hillside pads. On 92887 slopes, winter rain softens the fill and posts shift. The gate drags, the opener faults, and the homeowner assumes the motor died. Usually it didn’t. We reset the post and re-tune the swing arm instead.
- Warped wood gates and rusted iron hinges on 1960s – 1980s ranch properties. Dry Santa Ana winds pull moisture out of wooden gates, they warp, and the hinge line tilts. The gate binds, the opener overcurrents, and the system shuts down. We correct the gate and re-hang it before we blame the operator.
- Obsolete control boards on legacy operators. Your gate worked for 20 years, then the board lost its programming and the part is discontinued. We match replacement boards on site or retrofit a compatible controller with current safety compliance. Sometimes replacement is the cheaper option. We’ll tell you when it is.
- Photo eye and safety edge faults from sun and age. Yorba Linda’s dry heat and intense sun kill plastic sensor housings faster than coastal climates. We replace and align them so the gate stops reversing for no reason, or worse, stops reversing when it should.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Yorba Linda, CA
Here’s what electric gate repair actually costs in Yorba Linda. A residential opener repair runs $180 – $420. Control board replacement runs $300 – $750 on most Swing and slide operators. Hinge, wheel, or track work runs $150 – $500 depending on gate weight and access. Full residential operator replacement runs $900 – $2,400 installed. Commercial operator work starts around $2,200 and goes up from there based on gate length and duty cycle.
What drives the price in Yorba Linda specifically is gate weight and the layout of the driveway. An entry gate on a flat 92885 lot is straightforward. A 16-foot iron swing gate on a 92887 hillside pad with a post that has to be reset is a different day’s work. Either way, the price is quoted and agreed before any work starts. You’ll never get a surprise invoice from us. Call (855) 942-4867 for an exact quote, and the estimate is free.
We Also Serve Cities Near Yorba Linda
Our Electric Gate Repair team works throughout north Orange County. If your property is in Placentia, Brea, Villa Park, or Los Serranos, the same gate-exclusive crew handles your repair. And if you’re reading this from elsewhere, our dedicated Electric Gate Repair in Yorba Linda page covers everything you need to know about service in this area. We keep our service radius tight so response times stay predictable.
Serving Yorba Linda, CA — Our Local Coverage Area
We’re based in the Yorba Linda area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Yorba Linda
Most obsolete control boards on Yorba Linda estate gates can be retrofitted with an aftermarket or compatible board for $300 – $750, but the honest math is this: if the operator is also 15+ years old with a worn gearbox and no modern entrapment protection, replacement at $1,200 – $2,800 is usually the cheaper long-term answer. We’ll give you both numbers and let you decide. Call (855) 942-4867 and we’ll assess your specific operator.
On Yorba Linda’s hillside lots, especially in 92887, a rain-season gate failure is more often the ground than the motor. Graded fill softens, hinge posts shift, and the gate goes out of alignment, which makes the operator fault out. We check post footing and gate alignment before we condemn the motor, because fixing a $600 operator when the real fix is a $250 post reset wastes your money. We see this pattern constantly on steep-driveway estate gates. Call us and we’ll tell you which problem you actually have.
Older automatic gates in Yorba Linda that predate current UL 325 standards often lack the photo eyes and reversing edges required today. Legally, the code applies to new installations and significant modifications, but safety-wise, a gate without entrapment protection can seriously injure a child, a pet, or a delivery driver. We flag it on every repair. Adding photo eyes to an existing gate typically runs $180 – $400, and we can do it as part of any opener repair. If you’re unsure what your gate has, call (855) 942-4867 and we’ll check.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so yes, we service the brand you have. We don’t sell gates, which means we have no incentive to push a replacement brand over a repair. We carry parts for all nine brands in our trucks and can usually complete a Yorba Linda repair in one visit. That’s the advantage of a gate-exclusive company: the parts already live in our vehicles, not in a warehouse two weeks out.
Yorba Linda’s dry, hot summers and Santa Ana winds pull moisture out of wood gates, causing shrinkage that loosens hinge screws and door jambs. Then winter rains roll through and the wood swells, splitting around the old screw holes. If we just tighten the hinge, it’ll fail again. The durable fix usually means re-boring the hinge with a treated post insert, or replacing the wood section entirely if it’s too far gone. We’ll show you what we’re seeing and quote the repair that actually holds. Estimates are free, so call (855) 942-4867 to get us out to look.
Contact Riverside Gate Company for Electric Gate Repair in Yorba Linda
If your gate is down, stuck open, or acting up, call (855) 942-4867. We’ll ask what it’s doing, tell you honestly what we think it is, and give you a free estimate before any work starts. Our team works on gates exclusively, so from the motor to the control board, the problem on your Yorba Linda driveway is one we’ve seen before. We service all of Yorba Linda, including 92885, 92886, and 92887, and we’re out here every week. You don’t need another contractor. You need a gate specialist. That’s us.
Written by Neil Dravecky, Owner at Riverside Gate Company.