Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Aliso Viejo
Gate repair in Aliso Viejo typically runs $180 to $340 for common hinge, sag, and alignment work, and most HOA-compliant jobs are done in a single visit. We’re a gate-exclusive specialist based in Riverside serving every tract in 92656 and 92698. If your gate is dragging, seized, or the operator stopped responding, call (855) 942-4867 for a quoted price before any work begins.
Aliso Viejo is different from the neighboring cities. Nearly every gate here sits behind an HOA architectural committee, which means the repair isn’t finished when the weld cools. It’s finished when the management company signs off. We handle that part too.
Why Riverside Gate Company Is Aliso Viejo’s Preferred Gate Repair Company
We work on gates exclusively. Not garage doors, not fences, not general handyman punch lists. Automatic and electric gate systems, from the motor to the control board, across nine automation brands including LiftMaster, FAAC, BFT, DoorKing, Viking, Ghost Controls, Elite, Linear, and Mighty Mule.
That focus matters in Aliso Viejo because the housing stock is unusually uniform. The city was master-planned from the late 1980s through the 2000s, which means thousands of Mediterranean and Spanish-style tract homes with original builder-grade wrought-iron side-yard and driveway gates. Those gates fail in predictable ways. We’ve seen enough of them to know exactly what to look for before we even park the truck.
Neil Dravecky runs our gate operation, and our technicians carry gate-specific parts and tools on every call to the 92656 and 92698 ZIP codes. When an HOA in Aliso Viejo needs a hinge matched to an approved spec or a control board diagnosed, our Gate Repair team is prepared with parts on hand, not ordered after the fact.
Styles & brands we work with





Iron Gate Repair in Aliso Viejo
Iron Gate Repair in Aliso Viejo starts with understanding why the gate failed, and in the 1990s tracts off Aliso Creek Road the answer is usually the hinge post, not the panel. Hollow builder-grade posts collect sprinkler overspray and rust from the inside out. The post rots at the base, the gate sags, and no amount of hinge tightening fixes it. A typical hinge post replacement with footing repair in Aliso Viejo runs $320 to $550. Straightening and re-hanging a sagging iron gate runs $180 to $300.
Hollow Post Failure and Hinge Fatigue
This is the signature Aliso Viejo gate problem. The original wrought-iron gates in the tracts near Aliso Creek Road and around Pacific Park Drive were mounted on hollow steel posts with no drain holes. Irrigation overspray drips inside, sits at the base, and eats through the post from the inside where you can’t see it. By the time the gate drags on the concrete, the post is typically gone.
HOA-Compliant Finish Matching
Every Aliso Viejo HOA keeps architectural specifications on file. Powder-coat color, gate height, hinge style, picket spacing. When we replace a post or re-hang a gate, we match the approved black powder-coat finish and submit photos and a finish sample to the management company. Repairs clear the committee the first time, not after a redo.
Sliding Gate Repair in Aliso Viejo
Sliding Gate Repair in Aliso Viejo usually means one of three things: a rack and pinion problem on a driveway gate, a seized roller or track, or an operator misalignment on a gated community entry. The dry Santa Ana heat and morning marine layer work against the steel track and roller hardware. Powder-coat cracks, moisture gets in, and the wheels bind. Typical roller and track service in Aliso Viejo runs $220 to $400. Rack and pinion realignment runs $280 to $450.
Rack and Pinion Misalignment
Sliding gates in Aliso Viejo rely on a steel rack bolted to the gate and a pinion gear on the operator. When the gate frame shifts, or the post settles, the rack pulls out of alignment and the operator grinds or stalls. We realign the rack, re-shim the operator, and set the travel limits. No new operator needed in most cases.
Track and Roller Service on HOA Entries
Gated community entries in Aliso Viejo run daily cycles that a residential side-yard gate never sees. Rollers wear flat, tracks accumulate debris, and the gate starts shuttering on its travel. We clean and re-grease the track, replace worn rollers, and adjust the end stops. The goal is a quiet, smooth cycle that holds up through the next Santa Ana season.
Trusted Brands We Service in Aliso Viejo
We work on the brand you have, not the brand we’d rather sell you. In Aliso Viejo we regularly service Ghost Controls and Mighty Mule systems on residential driveway gates, plus DoorKing and Elite operators on the gated community entries and commercial properties throughout the 92656 and 92698 ZIP codes. Because we stock parts for these systems across our service area, most repairs in Aliso Viejo are completed in one visit. From the motor to the control board, we carry what’s needed to get the gate cycling again without a second trip.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Aliso Viejo Homes
- Hollow iron posts rusted from the inside out. Sprinkler overspray collects inside 1990s builder-grade posts with no drainage, rotting the hinge post at the base. The gate sags and drags because the post failed, not the panel.
- Weld corrosion from marine-layer moisture. The morning marine layer off the Aliso Viejo ridgeline adds moisture to untreated steel, and the dry Santa Ana winds bake it in. Welds at the hinge and latch points are the first to go.
- Wood gates shrinking and warping in dry heat. Original wood gates on older tracts crack and pull away from hinges during dry spells, which throws the latch out of alignment and binds the gate against the post.
- Operators failing on HOA entry gates. Shared entry systems in Aliso Viejo’s gated communities run thousands of cycles a month. Photo-eye misalignment, limit switch drift, and worn pinion gears are the usual culprits.
Pricing for Gate Repair in Aliso Viejo, CA
Gate repair pricing in Aliso Viejo follows the work, not a flat fee. Sagging iron gates run $180 to $300. Hinge post replacement with footing work runs $320 to $550. Sliding gate roller and track service runs $220 to $400, and rack and pinion realignment runs $280 to $450. Operator diagnostics and control board work start around $180 and go up based on the system. The price is quoted and agreed before any work starts. You pay what we said, not a number that shows up after the fact. Call (855) 942-4867 for an exact quote on your gate, no obligation.
We Also Serve Cities Near Aliso Viejo
Our Gate Repair in Aliso Viejo service area extends to Laguna Woods, San Joaquin Hills, Laguna Hills, and Irvine. We run the same gate-exclusive crews and stock the same brand-specific parts across the corridor. If your property is in a neighboring city or an unincorporated pocket, call (855) 942-4867 and we’ll confirm coverage.
Serving Aliso Viejo, CA — Our Local Coverage Area
We’re based in the Aliso Viejo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aliso Viejo
Yes, for most exterior gate repairs in Aliso Viejo, HOA architectural committee approval is required before you make any change to the gate’s style, height, color, or material. Routine hinge and operator repair that matches the existing approved spec may not require a full submission, but we document every repair with photos and finish samples so the property manager has what they need. We coordinate with management companies directly. Call (855) 942-4867 before you start to clarify the requirement for your property.
Because the hinge post is likely rusted through. Aliso Viejo’s original builder-grade gates were mounted on hollow iron posts that collect sprinkler overspray and rust from the inside out. The post fails at the base, the gate sags, and no panel repair fixes it. Replacing the post and footing is the actual fix, and we do that work in Aliso Viejo regularly.
On most Aliso Viejo systems it’s either a misaligned photo-eye, a drifted limit switch, or a worn pinion gear on a sliding gate. The operator itself is often fine. We test the control board, safety edges, and travel limits before recommending any part replacement, so you’re not paying for electronics you don’t need.
Yes. We service DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule systems that are already installed across Aliso Viejo’s gated communities and residential tracts. We work on the brand you have, and we stock parts for these systems to avoid a second trip.
Two forces work together. The morning marine layer adds moisture that corrodes untreated steel and welds, while the dry Santa Ana heat shrinks wood gates and bakes moisture out of the ground, causing post settlement. Hollow builder-grade iron posts in the 1990s tracts accelerate the problem because they trap sprinkler water with no drainage. The result is rust from the inside, warped panels, and mechanical wear that shows up earlier than in neighboring cities with different construction.
Call (855) 942-4867 for a free estimate on gate repair in Aliso Viejo. We quote the price before any work starts, we carry the parts that match your HOA’s approved spec, and we do the documentation your management company needs.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Aliso Viejo and Orange County.