Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Fontana
Gate repair in Fontana comes down to two separate housing eras: the 1950s-era steel gates off Sierra and Arrow that are now 60 years old, and the builder-grade aluminum gates in north Fontana’s 92336 subdivisions that fail within a few years of installation. We handle both every week. Riverside Gate Company is a dedicated gate specialist, not a general handyman who also does gates, and we’re in Fontana regularly with same-day and next-day availability for electric gate repair, automatic gate repair, hinge and post work, and realignment. Call (855) 942-4867 and you’ll get a straight answer about what’s wrong and what it costs to fix.
Why Riverside Gate Company Is Fontana’s Preferred Gate Repair Company
Fontana homeowners and property managers call us because we work exclusively on gates. That means when a DoorKing operator on a commercial lot along Valley Boulevard won’t cycle, or a BFT motor on a residential driveway gate off Citrus Avenue is dead, the technician who shows up has already diagnosed that exact failure on that exact brand dozens of times. No learning on your dime.
We also understand Fontana’s building stock in a way a general repair company doesn’t. Older homes in 92335 and 92336 have original wrought-iron gates set in concrete that’s now crumbling. Newer subdivisions off north Fontana’s Summit Avenue have lightweight aluminum gates with self-closing hinges that wear out fast. That familiarity changes the repair approach, and it’s why Gate Repair calls from Fontana get scheduled with the right parts on the truck the first time.
Neil Dravecky leads our team, and he’s built Riverside Gate Company around one principle: if it’s an automatic or electric gate, we’re the ones who fix it. From the motor to the control board to the hinge post, we carry the parts, tools, and brand knowledge that gate automation requires.
Styles & brands we work with
Wrought Iron Gate Repair in Fontana
Wrought iron gate repair in Fontana is a specialty in the older neighborhoods, and the work is usually structural, not cosmetic. The original gates installed on 1950s tract homes off Sierra Avenue and Arrow Boulevard were built from solid steel, but decades of Inland Empire heat, dry air, and irrigation overspray have taken a toll. We find bottom rails rusted through, hinge barrels seized, and posts that have shifted in crumbling concrete footings. A typical wrought iron gate repair in Fontana runs $225 – $650 depending on whether we’re replacing a rusted section, re-setting a post, or rebuilding a hinge, while full gate realignment runs $150 – $400.
Rusted Rail Replacement
The bottom rail is the first thing to fail on Fontana’s original steel gates because sprinkler water pools there and evaporates in 100°F summers, accelerating oxidation. We cut out the compromised section, weld in new steel matched to the original profile, and treat the repair with a rust-inhibiting primer before repainting.
Loose and Sagging Post Repair
When a hinge post shifts, the entire gate drops and starts dragging or catching on the latch. We re-set posts by removing the deteriorated concrete, bedding the post in fresh footing material, and verifying plumb before re-hanging the gate. It’s a structural repair, not a hinge adjustment, and it keeps the gate working through Santa Ana wind season.
Metal Gate Repair in Fontana
Metal gate repair in Fontana covers more than wrought iron. North Fontana’s newer subdivisions, particularly in 92336, are built with aluminum gates that look good on move-in day but sag within a few years. The self-closing hinges are lightweight, the posts are set shallow, and the intense UV exposure dries out any plastic or nylon components in the hardware. Metal gate repair in Fontana for these newer gates typically runs $175 – $425 for hinge replacement, post reinforcement, and latch alignment, while weld repairs on steel gates run $200 – $500.
Aluminum Hinge and Latch Failures
Builder-grade aluminum gates in north Fontana fail at the self-closing hinges because the hinge barrels are thin and the spring tension is set once at installation and never serviced. We replace these with heavier-duty hardware and set the tension correctly so the gate closes firmly without slamming.
Steel Frame Weld Repairs
On steel gates across 92335 and older parts of 92337, the failure point is usually a cracked weld at a rail joint or a torn hinge plate from years of wind load. Our welders repair the cracked section in place, reinforce the surrounding metal, and restore the gate to square before the paintwork is touched.
Trusted Brands We Service in Fontana
We work on the brand you have. That includes LiftMaster repair in Fontana for residential driveway gate operators, BFT and FAAC systems on commercial lots along the 210 corridor, DoorKing telephone entry systems on apartment communities in 92335, and Viking operators on industrial properties near the Auto Club Speedway. We also service Ghost Controls and Mighty Mule openers on DIY-style residential gates, plus Linear and Elite systems. Because we’re a gate-exclusive company, our technicians stock control boards, limit switches, and safety edge components for these brands in their trucks specifically for Fontana service calls, which means diagnosing the problem and completing the repair often happens in one visit.
Common Gate Repair Problems We See in Fontana Homes
- Self-closing hinge failures on new aluminum gates in 92336. Lightweight builder hardware wears quickly in the dry heat, and the gate starts sagging within two or three years even though the house is new.
- Bottom rail rust-through on original steel gates off Sierra and Arrow. Sprinkler overspray soaks the lower rail, salts and minerals sit there during Fontana’s long dry spells, and the steel eventually perforates.
- Loose posts in aged concrete footings on 1950s and 1960s tract homes. The concrete breaks down after six decades of thermal cycling, especially where the soil is dry and hard-packed.
- Automated gates that were retrofitted without proper conduit runs. Homeowners in older Fontana neighborhoods added operators to gates that were never wired for them, and the exposed wiring fails or creates a safety hazard.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Fontana, CA
Here’s what gate repair in Fontana costs based on the jobs we do most often. Wrought iron gate repair and structural weld work runs $225 – $650. Hinge and post replacement runs $175 – $425 depending on whether it’s a steel post set in concrete or a lighter aluminum post. Gate realignment runs $150 – $400. Electric gate repair, including motor diagnostics, control board replacement, or limit switch adjustment, runs $250 – $700 depending on the operator brand and the fault. Every repair includes a written quote and we agree on the price before any work starts, no surprises on the invoice.
Call (855) 942-4867 for a free repair estimate, or describe the problem and we’ll quote a range over the phone before we dispatch.
Why Fontana’s Gate Problems Are Different
Fontana’s gate failure patterns split cleanly along the two housing eras that shaped this city. Original 1950s steel gates off Sierra Avenue and Arrow Boulevard are rusting through at the bottom rail from decades of landscape irrigation overspray, while builder-grade aluminum gates in north Fontana’s 92336 subdivisions are failing at the self-closing hinges within a few years of installation due to lightweight hardware and relentless UV exposure. That split housing stock means a repair plan tailored to the age of the home matters. What we do for a 60-year-old steel gate in 92335 is a completely different job from what a three-year-old aluminum gate in 92336 needs.
Adding automation to older manual gates is another Fontana-specific challenge. On a recent job near Sierra and Arrow, we found a 1950s wrought-iron swing gate whose bottom rail had rusted through from years of lawn sprinkler overspray; the hinge post was also loose in its aging concrete footing. We replaced the rusted section, re-set the post footing, and installed a modern LiftMaster operator with safety photocells, giving the homeowner reliable automation on a gate that was never wired for it. Older tract homes weren’t built with the conduit runs or power provisions that modern gate operators require, so when automation gets added later, the electrical work is often improvised. That leads to repeated operator failures, tripped breakers, and safety edges that don’t function. We handle the mechanical repair and the electrical work together, serving Fontana homeowners who want the gate fixed right the first time rather than patched for another year.
We Also Serve Cities Near Fontana
Our Fontana service area extends into the surrounding communities, including Bloomington, Rialto, Glen Avon, and Pedley. We dispatch technicians from our Riverside base to Gate Repair in Fontana and these nearby cities daily, so scheduling is straightforward, and the parts we need for your brand of operator are stocked locally.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fontana
Builder-grade aluminum gates in the 92336 area are installed with lightweight self-closing hinges that wear fast in Fontana’s dry heat and intense sun. The hinge barrel loses tension, the gate drops, and the latch no longer lines up. We replace those hinges with heavier-duty hardware and set the closing tension properly. Call (855) 942-4867 and we’ll confirm the hinge size and quote the job over the phone.
No, and we’d advise against any contractor who says otherwise. Older Fontana homes off Sierra and Arrow were never wired for gate operators, and running power without proper conduit is a safety hazard. We can run a short conduit run to the post or use a solar option if the gate orientation allows it. We’ll assess the site and recommend the least invasive route that meets electrical code.
Every automated gate in Fontana must have functioning safety photocells at the minimum, plus reverse-sensing edges on larger commercial gates. When we install or repair an operator, we verify photocell alignment, test the edge sensors, and confirm the close force is set low enough to stop and reverse safely.
Sometimes yes, often no. If the hinges are intact and the post is solid, adjusting and shimming the hinge may fix the drag for a while. But in Fontana’s 60-year-old tract homes, the usual cause is a post that has shifted in crumbling concrete footing. Adjusting hinges on a failing post is temporary. We’ll tell you which condition you have before quoting the work.
If your gate opens for incoming traffic but you want hands-free exit without pressing a button, you need a loop detector installed in the driveway. If you want keyless entry from outside, a keypad or card reader handles that. We install both, programmed to work with LiftMaster, BFT, FAAC, DoorKing, and the other brands we service. Call (855) 942-4867 for an estimate, it’s free.
Written by Neil Dravecky, owner of Riverside Gate Company, serving Fontana and the Inland Empire with dedicated gate repair and installation since the company’s founding.