Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Poway
Gate repair in Poway usually means one thing: your driveway gate won’t open or close properly, and you need someone who understands why. Riverside Gate Company handles it. We’re a dedicated gate specialist, not a general handyman, and we work on the brand you have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. From Old Poway to Green Valley, we service the long slide gates, double swing gates, and automated entry systems that define this city’s rural-residential character. Call (855) 942-4867 and we’ll get a technician out to diagnose the problem and give you an upfront price before any work starts.
Why Riverside Gate Company Is Poway’s Preferred Gate Repair Company
Poway homeowners and property managers call us because we work exclusively on gates. That’s the whole job. When a BFT control board fails on a commercial property off Pomerado Road, or a Mighty Mule opener stops responding on a half-acre lot in Rancho Arbolitos, our technicians arrive with parts and diagnostic tools specific to gate automation. No generalist guesswork, no learning on your dime.
Led by Neil Dravecky, our team has built a strong local reputation across Poway’s 92064 and 92074 zip codes for diagnosing problems other contractors decline. Electric gate repair is a defined specialty here, not an afterthought. We service professional-grade commercial operators like FAAC, BFT, DoorKing, and Viking, plus residential systems from Ghost Controls, Mighty Mule, and Linear. That range matters in a city where one property might have a high-security slide gate on Twin Peaks Road and the next a simple solar swing gate on a ranch in Old Poway.
Styles & brands we work with





Metal Gate Repair in Poway
Metal gate repair in Poway most often means restoring a long, heavy driveway gate: wrought iron, chain-link, or steel frame on a slide or swing operator. These gates run hundreds of feet from the house, so the failure is rarely just a hinge. In Green Valley, for example, we diagnosed a LiftMaster slide gate operator that kept reversing on a long private drive. The culprit was a shorted loop detector lead buried under a run of several hundred feet, not the board. We re-pulled the low-voltage wire in conduit, replaced the safety photocell pair, and reset the open/close limits so the slide gate stopped false-reversing. The homeowner had been opening it by hand for a month.
Weld and Rust Repair on Poway Driveway Gates
Poway’s heat and UV do a number on painted steel. Faded powder coat, rust at the weld joints, sagging frame corners. We handle weld repair and rust treatment on-site where possible, then re-align the gate so it tracks square on the rail.
Gate Realignment After Post Heave
Dry-season soil movement is a real issue here. The clay soil under a swing gate post shifts, the post heaves, and the gate panel drags. We reset posts, shim the hinge side, and adjust the operator limits so the gate doesn’t overrun the next time a Santa Ana blows through.
Wood Gate Repair in Poway
Wood gate repair in Poway tends to involve driveway gates on larger lots: the kind built from redwood or cedar frames with steel operator posts. Dry summer heat cracks and warps the boards, and the weight of a solid wood panel on a swing operator accelerates hinge-post fatigue. We see this most often in the 1970s – 90s custom homes off Espola Road and around Rancho Arbolitos, where the original wood gates are now 30 – 40 years old.
Sagging Wood Swing Gates
When a wood gate drags after a hot summer, it’s usually the hinge post that has moved, not the hinges themselves. We re-square the post, add proper bracing, and adjust the operator’s force and travel limits so it doesn’t keep driving the panel past its stop.
Frame and Hardware Replacement
Sometimes the frame is past saving. We replace the structural frame, install stainless fixings on the hinge and latch side, and re-hang the existing operator if it’s still functional. You get a gate that closes square and doesn’t fight the wind.
Trusted Brands We Service in Poway
We work on the brand you have. That covers LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, from entry-level residential openers to commercial slide and swing operators. Poway’s mix of large-lot estates and small commercial properties means we routinely see Linear and LiftMaster boards cooked by inland heat, BFT hydraulic operators on gated communities off Scripps Poway Parkway, and Ghost Controls solar systems on rural drives. We stock common parts for these brands locally, which speeds up turnaround for Poway customers compared to a contractor who has to order everything in. If your gate is stuck open, stuck closed, or reversing when it shouldn’t, call us at (855) 942-4867.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Poway Homes
- Operator board failure from heat and UV. Poway’s dry summer sun bakes the electronics inside the control box. LiftMaster and Linear boards are particularly prone to heat-related capacitor and relay failure. The gate hardware often still works fine; the brain doesn’t.
- Long low-voltage wiring runs. When the operator sits 200 – 500 feet from the house, the photo-eye wiring and loop detector leads become the weak link. Buried splices corrode, conduit gets damaged, and the gate starts false-reversing or refusing to close.
- Post heave on swing gates. Dry-season soil contraction and winter rain expansion shift the post footing. The gate sags at the latch side and drags on the ground. If you keep forcing the operator, you burn out the motor.
- Santa Ana wind damage. Inland Poway sees gates driven past their mechanical stops during high wind events. Bent swing arms, sheared bolts, and broken limit switches are the usual result. Coastal San Diego doesn’t see this failure mode nearly as often.
Pricing for Gate Repair in Poway, CA
Here’s what you can expect to pay for common gate repairs in Poway. A hinge and post repair typically runs $180 – $420 depending on whether we need to reset the post footing. Gate realignment on a double swing gate usually costs $150 – $350. Weld and rust repair on a steel driveway gate falls between $200 and $600, depending on how much of the frame needs work. Electric gate repair, including control board diagnosis and replacement, starts around $250 and can reach $900 or more when you’re replacing a commercial operator board. A full new gate installation, including operator and low-voltage wiring, typically runs $2,500 – $8,000 depending on gate size, material, and access control. Every quote is agreed in writing before we start work. Call (855) 942-4867 for a free estimate.
We Also Serve Cities Near Poway
Riverside Gate Company provides Gate Repair throughout the Inland Corridor and north San Diego County. We regularly serve Poway, Rancho Penasquitos, Rancho Santa Fe, Mira Mesa, and Santee. Wherever your gate is, the same dedicated gate team handles it.
Serving Poway, CA — Our Local Coverage Area
We’re based in the Poway area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Poway
A slide gate that false-reverses on a Poway property is usually a low-voltage wiring or loop detector problem, not the operator board. The buried loop under your driveway or the photo-eye wiring along your fence is likely shorted, corroded, or damaged, and the board is reading that as an obstruction. We test the loop first, then the photo-eyes, then the board. Call (855) 942-4867 and we’ll diagnose it properly.
In our experience on Rancho Arbolitos properties, it’s the post. Poway’s clay soil contracts in the dry season, the post heaves, and the gate sags at the latch side. Hinges rarely fail on their own; they fail because the post moved. We re-set and brace the post, then re-align the gate and adjust the operator travel limits.
Santa Ana winds push gates past their mechanical stops, bending swing arms and shearing bolts. An operator that overruns its stop once will do it again unless the stops and travel limits are corrected. We set hard stops and reprogram the open/close limits so the gate can’t overrun, even in a strong east wind.
Yes. Photo-eyes, also called safety photocells, are required on automated gates to prevent the gate from closing on a person, vehicle, or animal. On Poway’s long driveway gates, the photo-eyes also serve as the primary obstruction sensor when the loop detector fails. We install and align them on every automatic gate repair we do. Call (855) 942-4867 if your gate won’t stay closed.
A solar gate opener can work on a long driveway gate in Old Poway, but only with a properly sized panel and battery bank. Poway’s hot, sunny climate is actually well suited to solar, but a heavy slide gate 300 feet from the house needs more panel wattage than a standard kit provides. We size the system to your gate weight and use cycle count, not to the average suburban gate. Ask us for a quote.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Poway and surrounding communities.