Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Redlands
Gate repair in Redlands usually runs $180 – $650 depending on the failure, and most jobs are finished in a single visit. We cover both halves of this city: the century-old citrus estates of 92373 and the tract subdivisions of 92374, plus 92375 up toward the 10. If your gate is sagging, refusing to open, or grinding against its track, call us at (855) 942-4867 and we’ll tell you what it costs before we touch a bolt.
Riverside Gate Company is a dedicated gate company, not a garage door shop that also runs gate calls. Led by Neil Dravecky, we work exclusively on gates: electric, automatic, iron, sliding, and everything in between. That focus matters here in Redlands, where a historic wrought-iron gate on a brick pier fails differently than a steel slider on a 2000s tract home, and a tech has to know both.
Why Riverside Gate Company Is Redlands’s Preferred Gate Repair Company
We service nine gate automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – which means when a Redlands customer calls with a dead DoorKing board or a Mighty Mule arm that stopped swinging, we already know the system. We’re not guessing with an instruction manual open in the truck. Gate repair is our entire business, and Gate Repair is what we do day in and day out.
Redlands customers call us because we show up ready to diagnose. From the motor to the control board, we carry gate-specific parts and tools that general repair services don’t stock. A generalist might spend an hour just figuring out which brand of operator they’re looking at. We read the board in the first five minutes.
We work across all of Redlands: the historic core around Olive and Cajon, the tree-lined streets south of Brookside, and the newer communities east of Wabash. Same-day service is available for most repair calls in Redlands, and we quote the full price up front. If you’re in Redlands, you’re in our regular service area, not an out-of-town exception.
Styles & brands we work with
Iron Gate Repair in Redlands
Iron gate repair in Redlands is often about the post and hinges, not the gate itself. In the 92373 historic core, wrought-iron drive gates hang on brick or adobe piers that have settled over eighty or a hundred years. The gate leaf is usually fine. The pier it swings from is leaning two degrees out of plumb. So the repair involves digging out the old footing, re-pouring a proper concrete pier, re-setting the hinge post, and then re-hanging the gate so it clears the ground by a consistent half inch across the whole swing.
A typical iron gate repair in Redlands runs $200 – $450 for hinge work and alignment. If we’re re-pouring a pier and re-setting the post, expect $600 – $1,200. We always quote the full number before starting. Neil Dravecky has seen enough of these Redlands citrus-era gates to tell you within the first five minutes whether it’s a ten-minute hinge adjust or a full re-set.
Hinge And Post Re-Setting
The classic Redlands failure on a heavy ornamental iron gate is a hinge that’s binding because the post moved. We remove the gate, re-plumb the post, re-set the hinges, and re-hang. When it’s done, the gate swings with one hand but stays dead silent on its hinges.
Weld And Rust Repair
Iron gates in Redlands bake in Inland Empire sun and go years between paint jobs. That means surface rust at the bottom rail and stress cracks at the weld joints. We grind, weld, treat, and repaint so the repair blends with the original ironwork. For heritage gates in the citrus estates, that matters.
Sliding Gate Repair in Redlands
Sliding gate repair in Redlands is a different animal from the old swing gates. Most sliders here are on tract homes built between 1985 and 2010 in the 92374 zip, running steel or vinyl gates on a track with a chain-drive or rack-and-pinion operator. The common failures are a track that’s shifted out of level, rollers that have seized, and a motor that’s burned out because it’s been dragging a gate that no longer rides its track properly.
Prices run $180 – $400 for roller replacement and track alignment, $300 – $600 for motor or control board replacement, and up to $1,100 if we’re cutting out a bent bottom rail and re-welding. You’ll know the exact number before we start.
Track And Roller Alignment
Redlands sits on dry, compacted soil that shifts during summer heat and Santa Ana wind season. That movement pulls post footings out of square and kicks track sections out of level. We re-set the track, re-seat or replace the rollers, and adjust the operator limits so the gate stops exactly where it should.
Operator And Control Board Replacement
Automatic gate operators die in Redlands heat, often right after a run of triple-digit days. If the motor hums but the gate doesn’t move, or the gate opens but won’t close, we’ll test the board, the photo eyes, and the motor. We replace only what’s actually failed – and we carry boards and motors for Ghost Controls, DoorKing, Elite, and Mighty Mule on the truck, plus we handle LiftMaster repair in Redlands.
Trusted Brands We Service in Redlands
We work on the brand you have. That’s the whole approach at Riverside Gate Company. In Redlands, that means we regularly service DoorKing and Elite commercial operators on apartment entries and business parks, plus Ghost Controls and Mighty Mule units on residential drive gates. We stock common boards, remotes, and safety photo eyes for these brands, so most repairs don’t wait on parts. If your gate was installed fifteen years ago and the original installer is gone, we can still get it running, because the brands we service span the full range from budget DIY units to high-end commercial automation.
Common Gate Repair Problems We See in Redlands Homes
- Settled adobe and brick piers in 92373. Decades of dry-season soil movement shift the masonry, and a heavy iron gate starts dragging or binding. The fix is re-setting the post and re-hanging the gate – not replacing it.
- Heat-baked lubricant and baked-out operator boards. Redlands summer heat dries hinge grease to paste and pushes motor windings past their limit. A gate that ran fine in May can seize by late July.
- Santa Ana wind damage to slide tracks. Strong east winds push against wide steel gates and torque the track mounts. The gate then binds partway through its travel, which burns out the operator over time.
- Failed photo eyes and edge sensors on automatic gates. Dust, sun glare, and daytime heat all take a toll on safety sensors. If your gate reverses for no reason or won’t close at all, the sensor is often the first place we look.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Redlands, CA
Here’s what Redlands homeowners are paying us for the most common repairs:
- Hinge and post re-alignment: $200 – $450
- Pier re-pour and post re-set (iron gates): $600 – $1,100
- Sliding gate track and roller repair: $180 – $400
- Operator or control board replacement: $300 – $600
- Weld and rust repair: $150 – $500 depending on extent
What moves the number is the size of the gate, how far the post has moved, and whether we’re reusing your existing operator or replacing it. The price we quote is the price you pay – we confirm it on site before any work starts. Call (855) 942-4867 for a free estimate from Neil Dravecky.
We Also Serve Cities Near Redlands
Our Gate Repair in Redlands coverage includes the surrounding communities, so if you’re in Mentone, Loma Linda, Highland, or Colton, we’ll get to you just as quickly. Redlands is our home base for the east Inland Empire, and we run calls through all four of those neighboring cities every week.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Redlands
Yes, and in most cases it should be. A leaning iron gate in Redlands almost always means the hinge post has moved, not that the gate itself is shot. We re-pour the pier, re-plumb the post, and re-hang the gate. You keep your original ironwork. Call (855) 942-4867 for an assessment – we’ll tell you if the gate is salvageable within the first visit.
Because the operator board and motor are sitting in direct Inland Empire sun, often inside a dark metal housing that hits 140 degrees. Heat degrades capacitors, dries out internal lubrication, and pushes aging motor windings to failure. We see a spike in board and motor replacements in Redlands every August and September.
Yes. Those 1980s-to-2000s steel and vinyl sliders make up a big part of our Redlands calls. Rollers seize, tracks go out of level, and operators burn out from dragging. We repair the track, the rollers, the operator, or any combination of the three, and we quote the fix before starting.
Automatic gates in California must be equipped with photo eyes or contact edge sensors that reverse the gate when an obstruction is detected. These sensors wear out in heat, dust, and direct sun. If your gate is reversing unpredictably or won’t close, the sensor is a likely cause. We test and replace safety devices as part of any automatic gate repair in Redlands.
Yes. In the 92373 citrus estates, we regularly restore original wrought-iron swing gates and wood picket gates rather than replacing them. We set new footings under settled piers, re-hang the gate to its original lines, and repair the ironwork or wood in place. A Redlands heritage property deserves that kind of repair, not a swap.
Contact Riverside Gate Company for Gate Repair in Redlands
If your gate is dragging, dead, or grinding, call (855) 942-4867. We’ll diagnose it over the phone, give you a straight price, and get to your Redlands property as soon as the same day. Free estimates, real numbers, and a gate specialist who works on the brand you have.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Redlands and the Inland Empire.