Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Santa Ana
Gate repair in Santa Ana typically costs $185 – $475 for common hinge, latch, and alignment work, with most jobs completed in a single visit. Electric gate and operator repairs run higher, usually $290 – $780, because they involve control boards, motors, and safety sensors. We’re Riverside Gate Company, a gate-exclusive specialist led by Neil Dravecky, and we work on the brand you have, from Mighty Mule swing arms on a French Park bungalow to FAAC commercial operators on a Dyer Road property. Call (855) 942-4867 and we’ll have a technician headed to your place in Santa Ana today.
Why Riverside Gate Company Is Santa Ana’s Preferred Gate Repair Company
We’re a dedicated gate company, not a general handyman outfit that also services garage doors or fences. Every job we take in Santa Ana involves gates: iron gates, wood gates, automatic gates, electric gate troubleshooting, and full replacement when that’s the right call. Our technicians carry parts specific to gate automation, so we’re not guessing at your control board while another contractor’s truck sits loaded with unrelated hardware.
Santa Ana homeowners call us because we understand what this city’s housing stock throws at a gate. The core ZIPs around downtown, 92701 and 92702, are full of 1920s through 1950s homes with original ironwork. The outer areas like 92704 and 92705 have more 1960s and 1970s tract housing with standard steel and wood gates. Both need different approaches, and we know which one applies the moment we see the property. Neil Dravecky has built the company around that kind of focused, gate-specific knowledge.
When you call us from Santa Ana, you reach a gate specialist, not a call center. We’ll ask about the symptoms, tell you honestly what it likely is, and give you a straight answer on whether it’s a repair or a replacement. Then we quote the price before we start, and that’s the price you pay.
Styles & brands we work with
Wrought Iron Gate Repair in Santa Ana
Wrought iron gate repair in Santa Ana frequently means saving the original ironwork rather than replacing it. In the Lacy and French Park historic districts, original wrought-iron and wood gates often still carry their 1920s-era strap hinges and thumb latches. Repair here means re-pinning and re-fitting vintage hardware to match the streetscape rather than bolting on modern components. A typical wrought iron hinge re-pin and alignment job in Santa Ana runs $220 – $420.
Re-Pinning Vintage Hinges
Old strap hinges wallow out over decades. The pin wears, the barrel elongates, and the gate drops until it drags on the walkway. We re-pin the hinge, re-set the post if it’s shifted, and rehang the panel so it swings through its full arc without scraping. Where the iron itself has cracked, we weld and grind it back to profile. The goal is always to keep the original look intact.
Post Reset and Gate Realignment
Santa Ana’s brief winter rains soften the soil around older hinge posts, especially where the footing was poured shallow back in the 1920s. The post leans, the gate sags at the post rather than at the frame, and the latch stops meeting its strike. We dig out the old footing, re-set the post in fresh concrete, and re-align the gate so it closes and latches without lifting the panel.
Metal Gate Repair in Santa Ana
Metal gate repair in Santa Ana covers steel driveway gates, aluminum pedestrian gates, and modern perimeter panels. These gates are more common in the outer ZIPs like 92704, 92705, and 92707, where 1960s through 1980s tract housing dominates. The typical problems are failed welds, rust at the bottom rail, bent top frames from wind load, and latch boxes that no longer catch. Most metal gate repair work in Santa Ana costs $160 – $410.
Weld and Rust Repair
The Santa Ana winds put real stress on metal gates, especially wide driveway panels with solid infill. Wind load flexes the frame at the weld joints, and over a few seasons the welds crack. We grind out the failed weld, re-weld the joint, and reinforce where the design allows. Rust at the bottom rail, where sprinkler overspray keeps the metal damp, gets wire-brushed, treated, and re-coated so it doesn’t come straight back.
Latch and Track Replacement
Sliding metal gates in Santa Ana wear out their V-groove wheels and track guides. The gate starts to bind, jumping the track or grinding on the concrete. We replace the wheels, re-set the track, and adjust the latch so the gate opens and closes without a fight. If the motor is also struggling, we’ll tell you during the same visit rather than letting it fail a week later.
Trusted Brands We Service in Santa Ana
We work on the brand you have. Our Santa Ana technicians service gate operators from FAAC, BFT, Linear, and Viking, plus LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. That range covers entry-level swing arms on residential gates all the way up to commercial slide and barrier operators. Because we’re gate-exclusive, we stock common control boards, safety edges, photo eyes, and receiver parts locally, which means faster turnaround when your operator goes down. We don’t tell you to replace a working FAAC operator just because we’re more familiar with another brand. We repair what you have.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Santa Ana Homes
- Wallowed-out strap hinges on pre-1950 gates. The original hinge pins wear thin and the gate panel drops until it drags. It looks structural, but it’s usually a hinge rebuild and re-set post. Common in Lacy, French Park, and the Washington Square area.
- Hinge posts softened at the footing. Brief winter rains push water into old, shallow footings. The post leans, the panel sags at the post, and the latch misses its strike. Fixing it means re-setting the post, not shimming the hinge.
- UV and wind damage on core-ZIP gates. Santa Ana’s semi-arid climate and hot, dry Santa Ana winds strip finishes fast. Wood gates crack and swell, iron gates lose their coating and rust at the joints. Repair schedules here skew toward re-sealing and hardware replacement after wind events.
- Obsolete control boards and missing UL 325 entrapment protection. Legacy operators from the 1990s and early 2000s often run boards that are no longer made. We can retrofit many of them with modern photo eyes, safety edges, and external receivers. When we can’t, we’ll tell you honestly and price a replacement operator.
Pricing for Gate Repair in Santa Ana, CA
Here’s what you can expect to pay for common gate repairs in Santa Ana. A hinge re-pin or latch replacement runs $185 – $320. Gate realignment and post re-setting runs $240 – $475 depending on whether the post needs new concrete. Weld and rust repair on a metal gate runs $160 – $410. Electric gate troubleshooting and control board replacement runs $290 – $780. Wrought iron and wood gate work in the historic core tends toward the higher end because we’re matching vintage hardware and fabricating pieces rather than swapping in off-the-shelf parts. Every quote is agreed before we start. No exceptions. Call (855) 942-4867 for a free estimate.
We Also Serve Cities Near Santa Ana
While this page covers Gate Repair in Santa Ana, our technicians routinely work in surrounding Orange County cities. We serve Tustin, North Tustin, Fountain Valley, and Orange with the same gate-exclusive focus. If your property sits near the Santa Ana border in any of those cities, you’re still within our standard service area. The same crew, the same pricing, the same direct line: (855) 942-4867.
Serving Santa Ana, CA — Our Local Coverage Area
We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Santa Ana
No. In most French Park and Lacy gates, the original strap hinges and thumb latches can be re-pinned, re-set, and re-fitted rather than replaced. We specialize in saving vintage ironwork, and we’ll fabricate matching hardware if a piece is beyond saving. Replacing the whole gate is almost never necessary when the problem is worn pins or a leaning post. Call (855) 942-4867 and we’ll assess it on site.
Many legacy operators can be retrofitted with modern photo eyes, safety edges, and UL 325 compliant controls. Whether yours qualifies depends on the specific control board and motor. If the board accepts external safety inputs, we can bring it up to current code without replacing the entire operator. If it can’t, we’ll quote a replacement and give you the straight answer on cost. Call (855) 942-4867 for a free evaluation.
Santa Ana wind events strip finishes, crack wood, and stress welds on wide metal gates. Repair demand spikes after these wind events, and we prioritize calls based on severity, not first-come. If your gate is still functional but damaged, sealing and hardware work can usually wait a few days. If the gate won’t close or secure, we treat that as urgent and get there same day in most Santa Ana ZIPs. Call (855) 942-4867 to schedule.
We service FAAC, BFT, Linear, Viking, LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule operators. That covers DIY-grade swing arms up to commercial slide and barrier systems. If your operator is from a different brand, we’ll still diagnose it, but we’re honest about what we know to the board level. For the nine brands listed, we carry common parts locally. Call (855) 942-4867 with your brand and model.
For pre-1950 gates in Santa Ana’s historic districts, repair is almost always cheaper than replacement, and it preserves the streetscape character. A full vintage iron gate replacement can run $2,500 – $6,000 when fabricated to match the original design, while repairing hinges, re-setting posts, and re-sealing usually costs $300 – $700. For 1980s-era steel gates with structural rot through multiple frame members, replacement may be the better value. We’ll show you the numbers either way. Call (855) 942-4867 for an honest assessment.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Santa Ana and Orange County with gate-exclusive repair and installation services.