Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pedley, CA
Gate installation in Pedley usually starts around $1,100 for a basic single driveway gate and climbs past $4,000 for a full automatic sliding system with intercom and keypad. The houses out here, mostly built between the 1950s and 1980s on larger lots, came with simple chain-link or wood-rail gates that predate automation. Riverside Gate Company has served Pedley since 2011, and we handle the full replacement or new-build job, from setting posts in wind-hardened soil to wiring a LiftMaster or DoorKing operator that can stand up to the Santa Ana gusts. Call (855) 942-4867 for a free estimate.
Why Pedley Homes Are Different
Pedley sits at the foot of the Jurupa Hills in the Santa Ana River corridor, and that location shapes every gate job we do here. The semi-arid inland valley gives us hot, dry summers that shrink and warp wood rail gates, while the winter brings Santa Ana winds exceeding 40 mph that slam into wide driveway gates and push automated openers past their rated capacity. We routinely find gate posts that have loosened after years of wind-driven soil erosion working the concrete free. That sagging post drags the gate leaf, the opener motor overworks, and the next call is for a burned-out board rather than a simple hinge.
The housing stock compounds it. Most Pedley properties are older single-family homes or rural-residential parcels from the 1950s through the 1980s. Driveways are often unpaved, gates are wider than you see in newer subdivisions, and many are still manually operated. When a property owner decides to automate a 16-foot wood-rail gate that’s been swinging by hand for thirty years, the job is different than dropping an opener onto a modern steel gate in Eastvale. We account for post integrity, hinge wear, wind load, and dust intrusion before we recommend a motor size. Newer subdivisions in the 92509 ZIP code are adding automated systems, but the older parcels remain the bulk of our Pedley work.
Styles & brands we work with
Our Main Pedley Services
Most calls we get from Pedley fall into two buckets: a gate that stopped working mechanically, or an electric operator that quit responding. Here’s how each one plays out in this part of the Jurupa Valley.
Gate Repair in Pedley
A gate that drags, sags, or won’t latch in Pedley is usually fighting both age and location. The wind-blown sand that moves through the Jurupa Hills finds its way into rollers, hinges, and track channels, grinding away at surfaces that would stay clean in Riverside. Add the occasional Santa Ana event loosening posts, and a gate that worked fine in spring can bind by October. We rebuild hinge mounts, reset posts in fresh concrete, straighten or replace frames, and swap out hardware rated for dust-heavy conditions. Full details on what we fix and what it costs are on our dedicated page for Gate Repair in Pedley.
Electric Gate Repair in Pedley
When an automatic gate stops responding, the problem is rarely the battery. In Pedley it’s often the control board coated with fine dust, a limit switch jammed by wind-blown debris, or a motor pushed past its duty cycle by gusts that add constant resistance. We diagnose from the motor to the control board, working on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Think of our Electric Gate Repair in Pedley page as the full technical walkthrough, including troubleshooting signs and realistic repair costs.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pedley
Gate installation in Pedley isn’t a drop-in job. The older homes and rural-residential lots in the 92509 ZIP code often need full groundwork before a new gate can hang: old posts pulled, concrete pads poured, and a wide gate opening rebuilt so a modern automated operator has a stable base. The hot, dry summers and periodic Santa Ana winds mean we recommend sealed bearing hinges and operators sized for wind resistance, not just gate weight. Whether you’re replacing a chain-link driveway gate with a steel automatic system or building a new entry on a larger parcel, we handle the full scope from excavation to final programming. See our full Gate Installation service page for the complete breakdown.
Driveway Gate Installation
Signs you need it
The old gate is manually operated and you’re tired of getting out of the truck to open it, or the existing posts are leaning from years of wind and the gate drags more with each season.
What it costs in Pedley
Expect $1,100 to $4,000+ depending on gate width, material, and whether you’re adding automation like a Ghost Controls or Mighty Mule opener.
How we do it
We pull the old hardware, dig and set posts in concrete sized for the gate’s wind load, hang and align the new gate, then install and test the opener if included.
Automatic Gate Installation
Signs you need it
You want keypad, remote, or intercom access instead of a manual swing, or you need a gate that can handle daily vehicle cycles on a busy property.
What it costs in Pedley
Automatic gate packages run $1,350 to $5,700+ in Pedley, with the spread driven by opener brand and access-control extras.
How we do it
We mount the operator, run the power supply, install safety edges and photo eyes, then program remotes and keypads to match how your household or tenants actually use the gate.
Sliding Gate Installation
Signs you need it
Your driveway slope or layout won’t support a swing gate, or you need to cover a wider opening without a leaf that swings into the road or yard space.
What it costs in Pedley
Sliding gate installation typically lands between $1,500 and $5,700+ here, with heavy-gauge steel and a Linear or DoorKing operator pushing the upper end.
How we do it
We lay the track or install a cantilever system, set the gate frame, fit the motor and rack, and tune the limit switches so the gate stops clean at both ends.
What Gate Installation Costs in Pedley
| Item | Typical range in Pedley |
|---|---|
| Manual driveway gate (installed) | $1,100 – $2,500 |
| Automatic gate package with opener | $1,350 – $5,700+ |
| Sliding gate with motor and track | $1,500 – $5,700+ |
How long does gate installation take in Pedley?
Most Pedley installations finish in one to three days depending on concrete curing time and whether power needs to be run to the gate location. We quote the schedule before work starts, and the price is agreed up front. Call (855) 942-4867 to lock in a measurement visit.
Do you handle the power run and the safety edges on a new Pedley gate?
Yes. Our installation includes the electrical run, conduit, safety photo eyes, and edge sensors required for a compliant automatic gate. We don’t hand it off to another contractor. Call (855) 942-4867 and we’ll walk the site with you.
Brands We Service in Pedley
We service the brand you have, not just the one we’d rather sell you. That includes Ghost Controls, Mighty Mule, DoorKing, and Elite systems we see across Pedley, along with LiftMaster, FAAC, BFT, Linear, and Viking. Because gates are all we do, our trucks carry common control boards, remotes, and limit switches for these lines, which means faster diagnosis and fewer second trips. Check our brands for the full list and what we stock.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pedley, CA
| Service | Typical range in Pedley |
|---|---|
| Gate repair (mechanical) | $125 – $450 |
| Electric gate diagnostic visit | $89 – $150 |
| Control board replacement | $300 – $800 |
| Opener motor replacement | $450 – $1,200 |
| Hinge or roller replacement | $150 – $400 |
| Gate post reset or replacement | $350 – $900 |
| Automatic gate installation | $1,350 – $5,700+ |
| Manual driveway gate installation | $1,100 – $2,500 |
| Sliding gate installation | $1,500 – $5,700+ |
What pushes a Pedley quote higher is usually the same thing that wore out the old gate: wind load on a wide leaf, sand-packed tracks needing full replacement, or a post that’s been loosened by years of soil erosion. Water-damaged control boards in older enclosures are another common cost driver we don’t see until the cover comes off. Every job is priced and agreed before any work starts.
Neighborhoods We Serve in Pedley
We cover the entire 92509 ZIP code, from the older parcels near Jurupa Road out to the newer subdivisions along the hills. Most Pedley calls get a same-day or next-day visit, with the compact service area keeping drive times short.
- Pinewood Estates
- Creekwood area
- Van Buren corridor
- 54th Street parcels
- Hillside lots near Jurupa Hills
Service Area – Cities Near Pedley
Our service area follows the Jurupa Valley and Santa Ana River corridor, so we’re in and out of Glen Avon, CA and Sunnyslope, CA daily. We also cover Rubidoux, CA just across the river, and anchor the whole route from Riverside, CA where our shop is based. Same team, same gate-only focus, every city.
Serving Pedley, CA — Our Local Coverage Area
We’re based in the Pedley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pedley
We respond to Pedley repair calls the same day in most cases, and next day at the latest. Since we stock gate-specific parts on our trucks, many mechanical fixes and electric diagnostics finish on the first visit without waiting on a parts order. Call (855) 942-4867 for a current arrival window.
Most like-for-like gate repairs and replacements don’t require a permit, but automatic gate systems must meet current safety standards including photo eyes and edge sensors. If your property falls under specific county or HOA rules, we’ll flag it during the estimate. We quote everything before work starts.
Yes. We service automatic and manual gates regardless of who installed them, and we carry parts for Ghost Controls, Mighty Mule, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Viking systems. You don’t need the original installer. Call (855) 942-4867 to schedule a diagnostic visit.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pedley Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Bethany Meyer"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Rohan Sharma"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Shannon Fletcher