Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Wrightwood
Gate repair in Wrightwood means dealing with conditions most Southern California gate companies never see: heavy snow, freeze-thaw cycles, and sloped mountain driveways. Riverside Gate Company works on gates here year-round, and we know what a Wrightwood winter does to a gate post. If your gate is dragging, binding, or not closing, call us at (855) 942-4867. We diagnose the real problem, not the symptom, and we quote the full repair before any work starts.
Why Riverside Gate Company Is Wrightwood’s Preferred Gate Repair Company
Wrightwood homeowners call us because we fix gates other companies misdiagnose. A dragging gate in Wrightwood is usually not a bad hinge, it’s a frost-heaved post. A gate opener that trips its safety circuit in the spring usually has a shifted underground conduit, not a bad control board. We learn these patterns by working here, not by guessing from a flatland service manual.
We’re a gate-exclusive shop. That means every technician who shows up in Wrightwood works on automatic gate systems full-time: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. From the motor to the control board, we carry parts for the brand you have. Neil Dravecky runs the company, and every repair is quoted and agreed before the work begins. If you live in Wrightwood, you get a gate specialist, not a generalist who also happens to do gates.
Our team drives the long access runs up SR-2 and Lone Pine Canyon Road regularly. We schedule Wrightwood work by neighborhood and elevation, because we know a gate off Angeles Crest Highway at 6,000 feet can have different issues than one lower down near the village center. Gate Repair in Wrightwood is a defined service area for us, not a zip code we happen to pass through.
Styles & brands we work with
Sliding Gate Repair in Wrightwood
Sliding Gate Repair in Wrightwood is one of our most common spring callouts. A sliding gate on a sloped driveway carries more load than the same gate on flat ground, and when a post heaves even an inch, the gate starts dragging, the rollers wear unevenly, and the operator motor strains against a track that is no longer straight. On a Wrightwood property, the fix often starts with re-setting the track and post footing, then adjusting the motor and limit switches. A typical sliding gate repair in Wrightwood runs $280 – $650 depending on whether we’re replacing rollers, re-setting a post, or rebuilding the operator mount.
Track and Roller Work on Sloped Driveways
Sloped driveways off SR-2 put constant downhill pressure on sliding gate wheels and tracks. We replace worn rollers, straighten bent track sections, and re-anchor track posts that have moved in the freeze-thaw cycle. This restores the smooth run the gate had when it was first installed.
Operator and Limit Switch Adjustment
When a sliding gate drags, the operator motor works harder. That burns limit switches and stretches belts. We adjust or replace the operator parts after the track is corrected, so the motor is not fighting a mechanical problem.
Wrought Iron Gate Repair in Wrightwood
Wrought Iron Gate Repair in Wrightwood often means fixing what snow-load has done to ornamental steel. Heavy wet snow sitting on decorative scrollwork will bend or crack it, especially on wide custom gates with a lot of surface area. We straighten bent panels, reinforce cracked welds, and re-hang gates that have sagged off the hinge post. A typical wrought iron repair in Wrightwood runs $220 – $700, depending on whether we’re welding, straightening, or re-setting a post.
Snow-Damaged Panel and Weld Repair
Ornamental iron panels pick up a surprising amount of snow weight, and the freeze-thaw cycles flex the steel every winter. We grind out cracked welds, re-weld stressed joints, and reinforce panels that keep breaking in the same place. The result is a gate that survives the next winter, not just the next month.
Frost-Heaved Hinge Post Reset
This is the most Wrightwood-specific repair there is. When the ground freezes and thaws, it pushes hinge posts out of plumb. We dig out the post footing, re-plumb the post, and re-set it in a new concrete base that anchors it deeper. Then we re-align the hinges, and the gate swings clean again. This is not a hinge adjustment. It’s a foundation repair for a gate.
Trusted Brands We Service in Wrightwood
We work on the brand you have. That includes BFT, Linear, Viking, and Ghost Controls, along with LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. For Wrightwood customers, we keep common operator parts for these brands in stock on our trucks, because a second trip up the mountain wastes your time. If we need to order a specific control board or motor, we tell you the lead time and the exact cost before we order. Gate Repair is all we do, so the diagnostic and the fix come from the same specialist.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Wrightwood Homes
- Frost-heaved hinge posts. Post freezes, ground swells, post tilts. The gate starts binding on the latch side and the operator strains. We re-set the post, not just the hinges.
- Snow-load bent ornamental panels. Wide custom gates catch snow like a sail. The middle of the gate sags, seams crack, and welds fail. We straighten and re-weld, then check the whole frame for hidden stress.
- Shifted underground operator conduits. Freeze-thaw ground movement can kink the conduit running to underground operators, causing false safety faults or a dead opener. We pull new wire and re-secure the run.
- Long driveway access runs with no gate power. Many Wrightwood gates run off a long power run from the house. A corroded splice or a tripped GFCI halfway up the driveway kills the operator. We trace the run and fix the fault at the source.
Pricing for Gate Repair in Wrightwood, CA
Here are the ranges we quote in Wrightwood. A hinge or latch repair on a standard swing gate runs $180 – $340. A sliding gate roller and track repair runs $280 – $650. A wrought iron panel straighten and re-weld runs $220 – $700. A full post re-set, including new concrete and re-alignment, runs $450 – $900 depending on post size and ground conditions. Underground operator conduit repair runs $300 – $800 depending on the run length and wire gauge. Every job is quoted and agreed before we start work, and estimates are free. Call (855) 942-4867 for an exact number on your gate.
We Also Serve Cities Near Wrightwood
Riverside Gate Company handles gate repair for the whole mountain corridor. We run calls to Piñon Hills, Phelan, Oak Hills, and San Antonio Heights from our Wrightwood routes. If you live outside the village proper but still off SR-2 or the 138, call us and we will tell you when we can be there.
Serving Wrightwood, CA — Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Wrightwood
Freeze-thaw cycles heave your gate post out of plumb over winter, so the gate binds against the latch or drags across the ground. The fix is re-setting the post footing, not adjusting the hinges. Call (855) 942-4867 and we will check the post before we touch the hardware.
Snow adds weight to the gate panels, which overloads the operator motor and burns limit switches. It can also pack into the track of a sliding gate and strain the drive belt. We inspect the full operator path, not just the motor, on every snow-country call.
Underground operators sit inside a conduit that can shift when the ground freezes and thaws. That movement kinks the wire run or breaks a splice, which trips safety faults. We pull new wire through the conduit and re-secure the run.
Yes. We straighten bent ornamental panels, grind and re-weld cracked joints, and reinforce sections that keep failing. We match the existing steel thickness and finish so the repair blends with the original gate.
The hinge post. In Wrightwood, a sagging gate is usually a post that has moved, not a hinge that has worn out. Check the post with a level before you adjust anything. Or call us and we will check it for you.
Need a gate fixed in Wrightwood? Call (855) 942-4867 now. Neil Dravecky and the Riverside Gate Company team will quote the repair, do it right, and stand behind it. Estimates are free, and the price is agreed before any work begins.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Wrightwood and the surrounding mountain communities.