Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Rialto, CA
Gate installation in Rialto usually runs $2,400 to $9,500 for a complete automatic driveway gate, depending on whether we’re working with a single swing arm, a sliding gate on a track, or a dual-leaf setup with full automation. Most of our Rialto jobs involve replacing or upgrading gates on 1950s to 1980s tract homes where the original gate was mild steel, site-welded, and never designed for four decades of triple-digit summers. The work here leans toward rebuilding existing openings rather than starting fresh, which changes how we quote, what we reinforce, and how long the job takes. Call us at (855) 942-4867 and we’ll walk the site, measure the actual opening, and give you a written price before any work starts.
We’re a gate-exclusive company, not a general handyman. That means when we install in Rialto, we’re already thinking about motor torque, control board placement, photo-eye alignment, and what the Santa Ana winds will do to the gate face in year five. From LiftMaster to FAAC to Viking, we work on the brand you have and install the right operator for the weight and width of the gate, not whatever happens to be in stock.
Why Rialto Homes Are Different
Rialto’s gate problems come from a combination that most cities don’t share: fifty to seventy year old houses, gates built by local welders out of mild steel, and a climate that punishes both the metal and the masonry around it. The vast majority of our Rialto call-outs in the 92376 and 92377 ZIPs are for gates that have been on the property since the original construction. Those gates weren’t powder-coated, weren’t hot-dip galvanized, and weren’t engineered with close tolerances. They were welded, painted, and hung on whatever post felt solid enough at the time.
Summer highs regularly pass 100°F here. Metal expands, hinges loosen, and gate leaves that were square in February start dragging on the latch post by August. Then the Santa Ana winds arrive and turn a slightly loose gate into a sail. We see bent frames, sheared hinge pins, and posts that have leaned forward an inch or two every fall. In the older neighborhoods off Foothill Blvd and Riverside Ave, many gate posts were set directly into cracked asphalt or into block walls that have shifted over decades. Root growth from mature trees has made it worse. The repair isn’t always about adjusting the hinges. Quite often we’re cutting the post free, setting a new footer, and re-hanging the gate from a post that actually stays put.
Rialto owners don’t typically call us for style upgrades. They call because the gate won’t open for the mail carrier, or won’t close all the way, or has started grinding when it moves. What we do here is restoration: bringing a locally fabricated gate back to square, true, and safe, then putting an operator on it that matches the weight and duty cycle. That’s the work this page covers.
Styles & brands we work with
Our Main Rialto Services
Most Rialto homeowners reach out for one of two reasons: the gate has stopped working mechanically, or the electric operator that moves it has died. Both have dedicated Rialto pages below.
Gate Repair in Rialto
Gate repair in Rialto is heavily weighted toward older iron and steel gates that have sagged, rusted, or separated at the hinges after decades of desert heat. We rebuild hinge points, straighten or reinforce bent frames, replace worn latch hardware, and re-set posts that have shifted in the soil or pulled out of old block walls. A typical Rialto repair involves more than one issue: the gate is sagging because the hinge post leaned, and the latch no longer lines up because the frame twisted. We look at the whole system. Gate Repair in Rialto is our full page on mechanical fixes, with pricing and response times.
Electric Gate Repair in Rialto
Electric gate repair in Rialto means diagnosing the motor, the control board, the limits, the photo-eyes, or the power run, often on a gate that has been automatic for years and suddenly stopped responding. Heat and dust shorten capacitor life; wind-driven gate slamming chews through gear teeth; UV and dry air degrade wire insulation. We carry boards, arms, remotes, and receivers for the major automation brands, and we troubleshoot from the motor to the control board, not just symptom to guess. Electric Gate Repair in Rialto covers the electrical side in detail, including same-day emergency options.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Rialto
Most gate installations in Rialto are replacements, not first-time builds. The typical property is a 1950s to 1980s single-story tract home with an existing driveway opening, a block wall, and an old custom gate that’s either too far gone to repair or too heavy for the operator someone bolted onto it. The heat out here weakens untreated steel over the years, and when we’re installing a new gate, we account for that on day one: heavier posts, better corrosion protection, an operator sized for the actual duty cycle, and hardware that won’t gum up with dust and rust. If you’re weighing the cost of replacing versus rebuilding, take a look at our full Gate Installation page for the complete breakdown.
We install both swing and slide systems, manual or automated, on new posts or on existing structure where it’s sound. Every quote is written after we measure the opening and inspect the condition of the wall or post base. You’ll know the full price before any work begins.
Driveway Gate Installation
Signs you need it
The gate is sagging past the point of hinge repair, the frame is rusted through in the lower rail, or you want a wider, safer opening with a proper operator instead of a manual gate that has to be muscled open.
What it costs in Rialto
Driveway gate installation in Rialto typically falls between $2,400 and $7,500 for a single swing or slide gate, depending on steel weight, dimensions, and whether we’re automating it.
How we do it
We measure the actual opening, pull the old gate if needed, set or recondition posts, hang the new gate square, and install the operator, safety edges, and stop points before testing the full sweep.
Automatic Gate Installation
Signs you need it
You want a gate that opens with a remote or keypad, your old operator is dead, or you’re done getting out of the car to open the gate every time you come home in July heat.
What it costs in Rialto
Full automatic gate installation in Rialto typically runs $3,500 to $9,500 including the gate, posts, operator, two remotes, a keypad, and all control wiring.
How we do it
We match the operator to the gate’s weight and width, set the posts to handle the torque, run dedicated power and low-voltage control wiring, and dial in limits, photo-eyes, and force settings so the gate moves without slamming or binding.
What Gate Installation Costs in Rialto
| Item | Typical range in Rialto |
|---|---|
| Single swing gate, manual | $1,200 – $3,500 |
| Single swing gate, automated | $3,500 – $6,500 |
| Sliding gate with operator | $4,000 – $9,500 |
What pushes the price up in Rialto is usually the post work: old block walls that need reinforcing, posts that have to be re-set in fresh concrete, and electrical runs that cross driveways or have to be trenched through hard-packed soil. The operator itself is rarely the expensive part of the job; making the structure strong enough to hold it is.
How long does gate installation take in Rialto?
A simple swing gate swap can often be done in one day. Full automation, post work, or a sliding gate on a new track typically takes two to three days, longer if we’re cutting into existing asphalt or repairing block wall structure.
Do I need a permit for gate installation in Rialto?
Most residential driveway gate replacements don’t require a city permit, but if the job involves a new electrical circuit or altering the driveway approach, the rules can change. Rialto’s building department generally reviews on a case-by-case basis. We’ll tell you what applies to your property during the estimate.
Brands We Service in Rialto
We work on the brand you have. In Rialto that means a lot of Linear and Mighty Mule operators on older homes, along with FAAC, BFT, and Viking on higher-end and commercial properties. Because we’re gate-exclusive, our trucks carry the boards, arms, remotes, and receivers for these systems, so most repairs don’t wait on a parts order. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Rialto, CA
| Service | Typical range in Rialto |
|---|---|
| Gate repair, minor hinge and latch | $150 – $450 |
| Post re-set in concrete | $400 – $1,200 |
| Electric gate diagnostic | $95 – $250 |
| Operator replacement (parts and labor) | $650 – $1,800 |
| Control board replacement | $350 – $900 |
| Gate opener arm replacement | $400 – $1,100 |
| Manual gate install, single swing | $1,200 – $3,500 |
| Automatic gate install, single swing | $3,500 – $6,500 |
| Sliding gate with operator | $4,000 – $9,500 |
On top of parts and labor, Rialto jobs add cost when the post base has failed and we’re digging new footers, when the electrical panel needs a dedicated breaker, or when the old gate is so far out of square that every hinge point has to be reworked. Whatever the number, you’ll see it in writing and agree to it before we touch the gate. No surprise invoices after the fact.
Neighborhoods We Serve in Rialto
We cover Rialto from the older grid off Foothill Blvd and Riverside Ave out to the newer developments near the 210. Most areas in the 92376 and 92377 ZIPs are within 30 to 45 minutes of our Riverside shop, and we schedule in half-day windows so you’re not waiting around all afternoon.
- North Rialto (north of the 210)
- Downtown Rialto and the Foothill Blvd corridor
- Las Colinas
- Renaissance
- East Rialto near Ayala Park
Service Area – Cities Near Rialto
Rialto sits right in the middle of our Inland Empire service area, so we’re also running gate repair and installation jobs in Bloomington, CA to the south, Fontana, CA to the west, and Muscoy, CA and San Bernardino, CA just east and north of the 10. If you’re a property manager with gates in more than one of these cities, we can schedule them on the same route.
Serving Rialto, CA — Our Local Coverage Area
We’re based in the Rialto area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rialto
Mechanical gate repairs and electric gate failures are typically scheduled same-day or next-day from our Riverside shop. Rialto jobs usually see a technician within 24 hours, and we carry the common boards, arms, and remotes on the truck so the first trip is usually the fix. Call (855) 942-4867 and we’ll give you the day’s actual window.
Most gate repairs don’t trigger a permit in Rialto: adjusting hinges, replacing operators, re-setting a post, and swapping a gate panel are all treated as maintenance. Full replacement that changes the driveway approach or adds a new electrical circuit may need a city review. We’ll check the specifics for your street during the estimate and tell you straight if a permit applies.
Yes. We work on residential swing and slide gates throughout the 92376 and 92377 ZIPs, and we also service commercial operators for apartment complexes, industrial yards, and retail properties. The same technician handles the motors, control boards, and safety systems on both, because that’s our trade. Not a side service.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Rialto Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Bethany Meyer"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Rohan Sharma"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Shannon Fletcher