Ghost Controls Gate Repair in Lake Arrowhead, CA

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in Lake Arrowhead, CA | Riverside Gate Company

We provide independent Ghost Controls gate repair across Lake Arrowhead, and the one thing that separates our work here from anywhere else is elevation. Lake Arrowhead sits above 5,000 feet in the San Bernardino Mountains, so Ghost Controls solar-charged and battery-backed operators face snow load, freeze-thaw cycles, and short winter daylight that lowland Southern California installs never see. We know those kits inside and out because we work on them every week. Call us at (855) 942-4867 for a free estimate.

Call (855) 942-4867

We’re Riverside Gate Company, a dedicated gate company that works on Ghost Controls sales & service plus eight other automation brands including LiftMaster, FAAC, BFT, and DoorKing. From the motor to the control board, we handle the full lifecycle of automatic gate systems without subcontracting anything.

Why Lake Arrowhead Residents Choose Us for Ghost Controls Service

Ghost Controls kits are popular in Lake Arrowhead because they’re solar-friendly and battery-backed, which matters when you’re off the grid or dealing with mountain power outages. But those same features create specific failure patterns at altitude. We’re an independent service provider, not a factory-authorized shop, which means we diagnose the whole gate system rather than assuming the control board is the problem. Neil Dravecky, our owner, has spent close to three decades working on gates and automated entry systems across the Inland Empire. He grew up off Magnolia Avenue in Arlington, picked up his metalworking and electrical training at Riverside City College, and built his reputation diagnosing intermittent faults that other shops gave up on, including on Ghost Controls in Highland. That’s the guy Lake Arrowhead property owners call when a gate quits after the first big snow and three other companies can’t figure out why.

We carry genuine Ghost Controls replacement arms, control boards, batteries, and safety sensors, plus quality aftermarket hardware like hinges, rollers, and keypads where that’s the better long-term value. Our techs know how Ghost Controls’ solar-charged architecture behaves when a mountain winter gets involved, and we arrive ready to work on the gate you actually have, not the gate we wish you’d bought.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Common Ghost Controls Gate Repair Problems We Solve in Lake Arrowhead

  • Ice-packed operator arms and frozen limit switches after the first big snow. The gate worked fine all summer, but now the arm won’t stroke because snow packed into the housing and froze the limit switch. We clear, dry, and reseal the arms so the operator cycles clean through the next storm.
  • Photo-eye and safety-beam faults from plow berms. Plow drivers push snow wherever it fits, and that often means burying the safety sensors and flooding the low-voltage wiring with snowmelt. We relocate and re-aim photo-eyes above the plow line and repair or replace wiring that was never rated for snow country.
  • Battery and solar-charge failures on second-home and rental gates. A Lake Arrowhead cabin that sits empty for weeks drains the backup battery, and short winter daylight plus a shaded, sloped lot means the solar panel never catches up. We test the charging circuit, replace drained batteries, and reposition panels where they’ll actually get sun.
  • Spring thaw heaving gate posts. When the ground freezes and thaws, undersized posts shift. The gate drags on the driveway, the operator strains against the misalignment, and you burn through gears or trip faults. We rebuild hinges, re-set posts, and get the geometry right again.
  • Burned gears from continued operation on a binding gate. A gate that’s dragging or misaligned eventually kills the operator. We can tell you honestly whether your Ghost Controls opener is salvageable with a rebuild, or whether the gears are past saving and a replacement arm makes more sense.

Ghost Controls Service in Lake Arrowhead: What Local Conditions Mean for Your Equipment

Lake Arrowhead sits above 5,000 feet in the San Bernardino Mountains, so Ghost Controls’ solar-charged operators here face real snow load, freeze-thaw cycles, and short winter daylight that lowland Southern California installs never see. That means battery backup and panel placement matter as much as the gate hardware itself. On a sloped lot off the mountain streets near 92352, a homeowner called after the first heavy snow: their Ghost Controls dual-swing kit wouldn’t stroke because the operator arm was packed with ice and the photo-eye was buried in a plow berm. We cleared and resealed the arms, relocated and re-aimed the safety sensors above the plow line, replaced a drained backup battery, and the gate cycled clean through the next storm. Then we came back in spring when thaw heaved a post and re-set the hinge and alignment. That’s the classic Lake Arrowhead cycle: ice in winter, heave in spring, and a gate that gets cycled hard on arrival weekends after sitting unused for weeks. If a gate’s giving you trouble, there’s a reason – we just have to find it.

Ghost Controls Models & Products We Service in Lake Arrowhead

We work on the full Ghost Controls lineup that Lake Arrowhead homeowners actually install, including the Heavy-Duty Automatic Gate Opener Kit for single swing gates, the Dual Swing Gate Opener Kit (TDS series), the Solar-Powered Gate Opener kits with AXS/AXP arm operators, and the tube-style slide gate operator kits. On older builder-grade gates we’re honest that a post or hinge rebuild often fixes what looks like an operator failure, and we only recommend a new operator when the existing one is genuinely past saving. We keep common Ghost Controls parts in local stock so we’re not waiting on a shipment when your gate is down.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Service Pricing in Lake Arrowhead

Ghost Controls gate repair in Lake Arrowhead typically runs $150 to $450 for most service calls, depending on the failure. What drives the cost: whether it’s a simple photo-eye realignment, a control board replacement, a battery swap, or a full hinge and post rebuild after a spring thaw. Every job gets a free estimate up front, and the price is quoted and agreed before any work starts, so you’re never surprised by an invoice. Call (855) 942-4867 for an exact quote. Estimates are free, and we’ll tell you straight whether a repair makes sense or a replacement does.

Serving Lake Arrowhead, CA — Our Local Coverage Area

We’re based in the Lake Arrowhead area and know this community well, and we also provide Ghost Controls in Crestline. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Lake Arrowhead

Service Areas Near Lake Arrowhead

Our Lake Arrowhead service area covers 92352 and the surrounding mountain communities. We also serve Running Springs, Trabuco Canyon, Portola Hills, and the broader Inland Empire, including Ghost Controls service in La Verne and Ghost Controls service in Foothill Ranch.

Book Your Ghost Controls Service in Lake Arrowhead Today

When your Ghost Controls gate is down in Lake Arrowhead, call (855) 942-4867 for a free estimate. We know these operators and we know this mountain. The price is agreed before any work starts, and we’ll get your gate running again.

Written by Neil Dravecky, Owner at Riverside Gate Company, serving Lake Arrowhead and the Inland Empire since his early days working on gates across the region, including Ghost Controls service in Running Springs.

Need Gate Repair help in Lake Arrowhead? Licensed & insured · same-day response · free estimates
Call (855) 942-4867
Areas We Serve

Request a Free Estimate in Lake Arrowhead

Tell us what you need — Riverside Gate Company responds fast. No obligation.

When you submit this form, you confirm you have read our Privacy Policy and authorize us to contact you by phone, email, or text about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Now
Call Now - 24/7 Dispatch