Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Riverside, CA | Riverside Gate Company
We repair Ghost Controls gate operators throughout Riverside, from the Wood Streets down to Glen Avon and the hills above. The short answer: we’re an independent gate company that services every current Ghost Controls line – DS, AXS, Slide, and HDZ – and we diagnose the gate and the operator together, because in Riverside the gate is usually what’s killing the operator. If your Ghost Controls system is faulting, reversing, or dead, call (855) 942-4867 and we’ll get it sorted. You’ll get a straight diagnosis, not a motor swap you didn’t need.
Why Riverside Residents Choose Us for Ghost Controls Service
Work on enough of these in Riverside and the pattern gets obvious. Most Ghost Controls operators don’t fail on their own. They fail because the gate they’re bolted to has shifted, sagged, or seized in our clay soil and heat. We don’t just reset the limit and leave. We find why the arm is binding, why the post moved, why the panel isn’t charging. Neil Dravecky grew up off Magnolia Avenue in the Arlington neighborhood, and after three decades working gates across the Inland Empire, he’s the one neighbors call when the problem doesn’t show up on the first visit. We carry Ghost Controls replacement arms, control boards, batteries, and solar panels, and we stock heavy-duty aftermarket hinges for the gate side of the job. Ghost Controls sales & service is a core part of what we do every week, not a side line.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Riverside
If a gate’s giving you trouble in Pedley or nearby, there’s a reason – we just have to find it. Here’s what that looks like on Ghost Controls equipment in this city:
- Winter limit and obstruction faults from post heave. Riverside’s expansive clay absorbs winter rain and lifts gate posts, sometimes an inch or more. The operator was dialed in for a gate that swung free in August, and now it stalls or reverses because the arm hits its obstruction setting. The fix is resetting the post in concrete first, then re-dialing travel – not replacing the operator.
- Seized hinges on heat-warped wood gates. A hundred-degree summer and bone-dry air crack and twist wood side-yard gates. The hinges stiffen, the swing arm drags past its travel range, and the DS or AXS operator trips its limits mid-cycle. We replace the hinges, re-hang the gate, and realign the operator.
- Solar panels reading ‘dead’ after Santa Ana winds. Dust and fine grit from Santa Ana events leave a film on solar panels that blocks charging. The battery drops, the operator quits, and the homeowner assumes the motor is toast. We clean the panel, test the charge circuit, and replace the battery only if it’s actually failed.
- Control-board corrosion near sprinkler overspray. Units mounted low near a gate catch overspray from Riverside lawns and winter rain. Terminals corrode, the board faults, and the gate does nothing. We clean, repair, or replace the board and reposition the housing so it doesn’t happen again.
- Root-displaced posts on citrus-era properties. This one is distinctively Riverside. Mature Valencia and navel orange roots push against fence lines until the gate post physically moves. The operator faults because the geometry changed, not because the motor failed.
Ghost Controls Service in Riverside: What Local Conditions Mean for Your Equipment
Riverside’s citrus-era properties create a failure pattern that doesn’t show up in most gate service guides. Side yards along the old grove lots still have mature Valencia and navel orange trees, and their roots run shallow and wide, pressing against fence lines and gate posts for decades. We regularly find posts displaced by root pressure rather than soil movement alone – the operator faults, the gate drags its latch, and the real repair starts with digging out a root-bound post. We’ve done this on properties from Arlington Heights to Casa Blanca. A homeowner in the Wood Streets called because the Ghost Controls DS1 on their side-yard swing gate was reversing halfway through every open. Our tech found the hinge post had dropped over the winter rains and the clay had shifted the gate out of plumb against a nearby orange tree’s roots. We reset the post in concrete, re-hung and realigned the hinge, then re-dialed the arm travel – the same operator has run clean since. Riverside service area work like this is why we diagnose the gate before we touch the electronics.
Ghost Controls Models & Products We Service in Riverside
The Ghost Controls lineup is straightforward, and we work on all of it. The DS Series single-swing solar operators like the DS1 are the most common units we see on Riverside side yards. The AXS Series dual-swing operators handle wider double gates, and the Slide Series TX/TXR covers sliding gates on ranch-style and newer properties. We also service the Heavy-Duty HDZ swing operators. When a unit is repairable, we use Ghost Controls’ own replacement arms, control boards, batteries, and solar panels. Where the originals failed structurally – brackets, hinges – we install quality aftermarket parts that hold up better. If the operator is sound and the gate frame or post is the problem, we’ll tell you that. We don’t sell a motor to fix a sagging gate.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Riverside
The price depends on what’s actually wrong, so here’s a straight breakdown of what you’re looking at before we start:
- Service call and on-site diagnosis: $75 – $110, applied toward the repair if you approve the work.
- Limit and travel adjustment: $90 – $160 – common after post heave or hinge wear changes the gate’s geometry.
- Solar panel cleaning and charge-circuit check: $70 – $140, which typically clears the ‘dead operator’ complaint without touching the motor.
- Battery replacement: $60 – $150 depending on the battery type and its location on the gate.
- Control board replacement: $180 – $420, part and labor included, depending on the Ghost Controls model.
- Hinge replacement and gate realignment: $160 – $380, including the labor to pull the gate and reset it in line.
- Post reset in concrete: $220 – $500, depending on access and how much root or old concrete has to come out first.
Every quote is agreed before any work starts – you’ll know the number and we’ll stick to it. If what you need is a full operator replacement, we’ll give you the cost for the unit and the install as separate lines so there’s no ambiguity. Call (855) 942-4867 for a free estimate on your specific Ghost Controls system.
Serving Riverside, CA — Our Local Coverage Area
We’re based in the Riverside area and offer Riverside Gate Repair because we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Riverside
That’s almost always post heave. Riverside’s clay soil swells when winter rain soaks in, lifting the hinge post enough that the gate no longer swings true. The operator’s obstruction detection kicks in because the arm is now fighting the gate’s new position. We reset the post and re-dial the travel, and the problem goes away. Call (855) 942-4867 and we’ll confirm it on site.
Yes, and it’s a common setup in Riverside’s older neighborhoods. The issue is usually the fence line, not the operator – orange roots push posts out of line and the gate binds. We dig out the root-bound post, reset it, re-hang the gate, and then adjust the operator to the corrected geometry. We see this on Heritage Week and citrus-belt properties regularly.
Not usually. Santa Ana winds coat solar panels in fine dust that cuts their output enough that the battery never recharges, and the unit goes dead. We clean the panel, test the charge circuit and battery, and replace only what’s failed. Most of these calls end with a working operator and no new parts.
We do. Replacement arms, control boards, batteries, and solar panels for the DS, AXS, Slide, and HDZ lines are things we stock and install, and we source directly as an independent service provider. If the part is backordered, we’ll tell you the lead time before any work is approved. Call (855) 942-4867 with your model number and we’ll check stock.
No, that’s a gate problem. Sixty-mile-an-hour gusts and a decade of dry heat have moved the gate frame or hinges, so the latch doesn’t line up anymore. We realign the hinges, reset the gate, and then adjust the operator’s travel to match. The motor usually needs no work once the gate is back in line.
Service Areas Near Riverside
We handle Ghost Controls gate repairs across the surrounding communities too. If you’re in Ghost Controls service in Rubidoux, we’re there regularly. We also cover Ghost Controls service in Sunnyslope, Trabuco Canyon, Portola Hills, Lake Arrowhead, La Verne, Foothill Ranch, and Running Springs.
Book Your Ghost Controls Service in Riverside Today
If your Ghost Controls operator is faulting, reversering, or dead, don’t wait for the next windstorm to finish it off. Call (855) 942-4867 for our Electric Gate Repair in Riverside, and we’ll get a gate specialist to your property – usually same day for repair calls. You’ll know the problem and the price before any work starts.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Riverside since day one.