Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Yucaipa, CA | Riverside Gate Company
We repair Ghost Controls gate operators across Yucaipa, and offer Ghost Controls repair in Calimesa too — we’re independent, not affiliated with or authorized by Ghost Controls. Most Yucaipa calls that sound like a dead motor are actually post, hinge, or battery problems caused by Santa Ana winds, sandy foothill soil, and summer heat baking solar-charged batteries. We diagnose the real fault before recommending any repair. Call (855) 942-4867 for service.
Riverside Gate Company works on Ghost Controls DSG, ARES, and AXS operators every week throughout the Inland Empire foothills. We know the control boards, limit programming, and low-voltage charge behavior on these units. If you own a Ghost Controls system in Yucaipa, we can troubleshoot it, fix it, and tell you honestly when a rebuild costs more than a new operator. We also handle Ghost Controls sales & service across our full coverage area.
Why Yucaipa Residents Choose Us for Ghost Controls Service
We work on gates exclusively. That’s the whole job. Not garage doors, not fences on the side – automatic gate systems, day in and day out. So when a Ghost Controls operator in Yucaipa won’t hold a charge or trips its reverse halfway through the travel, we’re not guessing. We’ve seen the same fault on the same model a dozen times that month.
Neil Dravecky, our owner, has spent the better part of three decades on gates across the Inland Empire, including Ghost Controls in Mentone and surrounding areas. He grew up in Riverside and learned electrical and metalwork at Riverside City College before working his way through the gate trade – operators, control boards, hinge rebuilds, the works. He’s known for tracking down intermittent faults that other shops gave up on. If a gate’s giving you trouble, there’s a reason – we just have to find it.
We carry OEM Ghost Controls boards, arms, and battery kits where parts are still supported, plus quality aftermarket batteries and hardware where they make better sense. For Yucaipa homeowners that means less waiting on shipping and a faster fix on-site. We also cover the full Yucaipa service area, from older ranches off Oak Glen Road to the newer tract communities on the east side.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Yucaipa
- Deep-discharge battery failure on solar operators. A hot, dusty Yucaipa summer bakes the battery inside the metal control box. If the solar panel sits in afternoon shade or the battery’s a few years old, the operator dies mid-travel or won’t hold a charge. We test the panel output, the charge circuit, and the battery itself, then replace what’s actually failing.
- Limit and obstruction faults from a racked gate frame. Yucaipa’s heat expands metal. Winter frost contracts it. Over enough seasons a gate frame can drop or rack, the Ghost Controls arm binds, and the board trips the safety reverse. The motor is fine. The gate geometry is the fault. We re-hang, adjust, and reprogram limits.
- Corroded battery terminals and control-board contacts. Damp winter mornings plus sprinkler overspray on exposed steel cause corrosion on foothill properties where gates sit in the open. We clean or replace terminals, inspect the board for moisture damage, and seal the housing where needed.
- Sheared hinge plates and pulled gate posts after Santa Ana wind. A wind night in Yucaipa can drag a post loose in dry, sandy soil and shear the hinge plate. The operator gets blamed, but the post is the problem. We reset posts in concrete, rebuild hinge plates, and realign the operator.
- Solar panel misalignment and undersized panels. On rural Yucaipa properties with long driveways and heavy gates, the stock Ghost Controls solar kit sometimes can’t keep up with demand. We check voltage under load and often upgrade the panel or add a second panel so the system actually charges.
Ghost Controls Service in Yucaipa: What Local Conditions Mean for Your Equipment
Yucaipa sits at the base of the San Bernardino Mountains, and that position shapes how gates fail here more than most homeowners realize. The foothill roads – think Oak Glen Road heading up toward the mountains or the canyon-side properties off Highway 38 – funnel Santa Ana winds down the slopes. When those winds hit a gate, they push hard against the full surface area, and in Yucaipa’s dry, sandy soil, the post doesn’t always hold. We’ve pulled posts out of the ground by hand after a wind event because the soil had let go entirely.
What that means for Ghost Controls owners specifically — including those needing Ghost Controls service in Redlands — the operator is the last thing we check, not the first. A homeowner calls saying the motor is dead, but the arm is bound because the post moved half an inch and the whole gate racked. The board reads an obstruction fault, the gate reverses, and everyone blames the brand. Our job is to find the ground-level cause before spending your money on electrical parts. We check post plumb, footing depth, hinge wear, and gate alignment before we ever open the control box. That sequence alone saves Yucaipa homeowners real money, because a new Ghost Controls arm doesn’t fix a leaning post.
Ghost Controls Models & Products We Service in Yucaipa
We service the full Ghost Controls lineup, including the DSG deck and side gate solar operators, the ARES swing-gate series, and the AXS heavy-duty swing operators. We also work on the solar and battery accessory kits, keypads, remote entry, and vehicle sensors that come with these systems.
Our parts approach is straightforward. If your Ghost Controls unit is still supported, we use OEM boards, arms, and battery kits. If an aftermarket battery or hardware component is the better value – and on older solar units it often is – we’ll tell you that and quote both options. We never swap a motor because a board failed, and we never sell a control board because a battery is weak. And on older units where a rebuild costs more than the operator is worth, we say so and quote a replacement.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Yucaipa
Ghost Controls repair pricing in Yucaipa depends on what’s actually wrong, which is why we insist on diagnosing before quoting. A battery replacement runs roughly $120 to $260 including the part. A control board replacement typically falls between $280 and $520. Solar panel replacement or upgrade lands in the $180 to $400 range. A hinge plate rebuild or weld repair can run $200 to $500 depending on the damage. Full operator replacement starts around $650 and goes up from there based on gate size and model.
A few things that push costs higher in Yucaipa and nearby Ghost Controls repair in Banning specifically: post resets after Santa Ana wind damage, corrosion repair on salt-exposed or sprinkler-wet steel, and realigning gates that have racked through multiple frost cycles. Our free estimate includes diagnosing the fault and walking you through exactly what we’d do. You’ll know the price before we touch a wrench. Call (855) 942-4867 to book an estimate.
Serving Yucaipa, CA — Our Local Coverage Area
We’re based in the Yucaipa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Yucaipa
Probably not. We see this exact call after every Santa Ana event. The operator is usually fine – the hinge post has pulled loose in the dry, sandy soil and the gate racked, throwing the arm out of travel. We check post plumb and footing before testing the motor. Call (855) 942-4867 and we’ll find the real cause.
A solar-charged unit dying in summer heat is almost always a battery that’s been baked inside its metal control box, a shaded or misaligned solar panel, or both. In Yucaipa’s 100°F-plus summers, the panel needs full sun and the battery needs to be in good shape to keep up. We test the panel’s output and the battery’s condition, then replace whichever is failing.
Most residential setups we see in Yucaipa are the ARES swing-gate operators on driveway gates, with the DSG series on side and pedestrian gates. Ranch and equestrian properties sometimes run the AXS heavy-duty series on wider, heavier gates. We stock and service parts for all three lines.
Half-travel reversing is the safety obstruction circuit doing its job, usually because the gate frame has racked or dropped from Yucaipa’s heat and frost cycles. The arm binds, the board reads resistance, and the gate reverses. We realign the gate and reprogram the limits rather than replacing parts that don’t need replacing. Call (855) 942-4867 for a diagnosis.
Yes, we repair rusted hinges and welds regularly. We grind out the rust, rebuild or replace hinge plates, and re-weld as needed. If the post itself is rotted or pulled loose, we reset it in concrete before re-hanging the gate. We only suggest replacing the gate when the steel is too far gone to hold a weld safely.
Service Areas Near Yucaipa
We also provide Ghost Controls service in nearby communities. We cover Ghost Controls service in Claremont for the foothill neighborhoods on the west edge, and Ghost Controls service in Pomona for the Inland Empire corridor. We make runs up to Lake Arrowhead and Running Springs when mountain properties need attention, and we serve La Verne, Foothill Ranch, and Trabuco Canyon as well.
Book Your Ghost Controls Service in Yucaipa Today
If your Ghost Controls gate is acting up in Yucaipa, call (855) 942-4867 now. We’ll diagnose the fault, quote the repair before any work starts, and in many cases get your gate moving the same day. Estimates are free.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Yucaipa and the Inland Empire since opening.