Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across North Tustin
Electric gate repair in North Tustin typically runs $185 – $480 for most common failures, and our techs reach most North Tustin properties within 60 – 90 minutes. A gate that won’t open, a motor that hums but doesn’t move, or a keypad that quit recognizing your code – those are all jobs we handle same day. North Tustin’s estate properties and equestrian ranches put unusual demands on gate hardware: long driveways, heavy ornamental iron, sloped terrain, and decades-old posts. We’re a dedicated gate company, not a generalist, and we carry parts for LiftMaster, FAAC, BFT, DoorKing, Viking, Linear, Ghost Controls, Elite, and Mighty Mule. Call (855) 942-4867 and we’ll give you a straight answer over the phone before we ever roll a truck.
Why Riverside Gate Company Is North Tustin’s Preferred Electric Gate Repair Company
North Tustin homeowners call us because we work on the brand they have. Not “something similar.” The exact operator bolted to their post. We stock control boards, limit switches, gearboxes, and remotes for nine major gate automation lines, which means fewer trips back and forth and fewer days waiting on parts. When a DoorKing on Skyline Drive fails or a Mighty Mule off Foothill Boulevard won’t budge, our tech shows up with the right components in the van.
Our local reputation in North Tustin was built job by job. We’ve rebuilt swing gates on Cowan Heights estates where the original 1970s ironwork had sagged so badly the opener was fighting the gate on every cycle. We’ve diagnosed dead FAAC operators on Newport Avenue horse properties and had them running the same afternoon. Property managers tell us the same thing: gate companies that say they’ll show up and then don’t are common. We quote a time window, we hit it, and we finish the job before leaving. Neil Dravecky runs the company, and every North Tustin job gets his direct attention when it needs it.
Styles & brands we work with
Automatic Gate Repair in North Tustin
Automatic Gate Repair in North Tustin usually means one of three things: a swing gate that drifted out of alignment, a slide gate that jumped its track, or an operator that stopped responding entirely. On an estate lot, none of these are DIY fixes. A 400-pound ornamental iron gate carries real force, and when it fails, it fails at the hinge, the post, or the motor’s gearbox – all of which require a trained hand. We handle the full repair: align the gate, rebuild or replace hinges, set posts in concrete where they’ve heaved, and recalibrate or replace the operator so the gate runs true.
Swing Gate Repair
Swing gates on North Tustin’s larger lots are often 12 to 18 feet wide and built from heavy steel or iron. When the post shifts even half an inch, the gate drags and the opener strains. We re-set posts, weld cracked hinge plates, and re-hang the gate. Cost for swing gate alignment and hinge work typically runs $220 – $450.
Slide Gate Track Repair
Slide gates on sloped hillside driveways fail most often at the track. Wheels wear, the rail bends, and the gate binds. We straighten or replace track sections, replace wheels, and reset the operator’s torque limits so the motor isn’t fighting the gate. Most slide gate repairs in North Tustin run $250 – $500 depending on track length and wheel condition.
Electric Gate Motor in North Tustin
Electric Gate Motor replacement in North Tustin is one of our most common calls, and for good reason: the original operators installed with many of these homes were built for lighter gates than what the property actually has. A motor that’s undersized burns out faster, especially on a heavy iron gate that’s already sagging. We don’t swap a motor and walk away – we check the gate’s weight, alignment, and travel, then install an operator that’s matched to the actual load. LiftMaster and FAAC are the two most frequent replacements we install on North Tustin estates, but we service and install all nine brands we carry.
Motor Diagnosis
A motor that hums without moving is usually a capacitor or gearbox issue. A motor that opens but won’t fully close is often a limit switch or safety sensor problem. We diagnose these on-site, quote the repair before work starts, and keep the most common motor parts in the truck.
Operator Replacement
When a motor is beyond repair, a new operator in North Tustin typically runs $600 – $1,400 installed for a residential system, and $1,400 – $3,200 for a commercial-grade slide operator. The spread depends on gate weight, panel features, and whether we’re reusing existing wiring or running new conduit. Every quote is agreed before work starts.
Trusted Brands We Service in North Tustin
We work on the brand you have. That means Ghost Controls and Mighty Mule on backyard and paddock gates, DoorKing and Elite on residential driveways, and FAAC, BFT, LiftMaster, and Viking on heavier estate and commercial-grade systems. We stock common boards, remotes, safety sensors, and gears for these brands and can usually complete a repair in one visit. If a part isn’t in the van, we source it directly from the manufacturer’s supply chain, not an aftermarket workaround. North Tustin customers don’t wait weeks for parts.
Common Electric Gate Repair Problems We See in North Tustin Homes
- Hinge posts set in decomposed granite without concrete footings. This is the single biggest source of gate failure in North Tustin’s equestrian pockets off Newport Avenue and Cowan Heights. The post looks fine until winter rain loosens the granite, the post heaves, the gate drags, and the opener burns out trying to move it.
- Rusted hinges and sagging iron gates from hot summers and Santa Ana winds. Many original 1960s – 1980s decorative iron gates have never been re-hung. Dry heat accelerates rust at the hinge plates, and once a heavy gate sags, it puts constant strain on the operator. We weld, re-hang, and re-align rather than just replacing the opener.
- Clay soil shifting gate posts and derailing slide gates. North Tustin’s clay soil expands in wet winters and contracts in dry summers. That seasonal movement shifts posts and knocks slide gates off their rails. We re-set posts below the frost line with proper concrete and re-level the track.
- Safety sensors and photocell failures on older systems. Many North Tustin properties still have operators installed before current safety standards. Non-monitored or failed photocells either stop the gate from closing or create a real safety risk. We replace them with current UL-compliant sensors on every repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in North Tustin, CA
Here’s what North Tustin homeowners can expect. Gate alignment and hinge repair runs $185 – $450. Control board replacement runs $220 – $520. Keypad and remote programming runs $90 – $180. Safety sensor replacement runs $140 – $280 per set. Full operator replacement runs $600 – $1,400 for residential and $1,400 – $3,200 for commercial-grade systems. Factors that move the number: gate weight, whether the post needs re-setting, whether it’s a hillside install requiring custom fabrication, and how far the wiring has degraded. You get a written quote before we start, and for complex issues we’ll explain options rather than pushing the most expensive fix. Call (855) 942-4867 for a free estimate – we’ll ask a few questions and give you a realistic price range on the phone.
We Also Serve Cities Near North Tustin
Our Electric Gate Repair service covers all of North Tustin and the surrounding area. If your property is in Electric Gate Repair in North Tustin or anywhere in the 92711 ZIP, you’re in our service area. We also handle jobs in Tustin, Orange, Villa Park, and Santa Ana.
Serving North Tustin, CA — Our Local Coverage Area
We’re based in the North Tustin area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in North Tustin
Because many gate posts in North Tustin’s equestrian neighborhoods were set directly into decomposed granite without concrete footings. The granite drains poorly, the winter moisture loosens it, and the post starts to shift. A shifted post makes the gate drag, and a dragging gate overworks the opener until the motor or control board fails. The fix is to excavate the post, pour a proper concrete footing, and re-align the gate – not just replace the opener. If your gate starts dragging after rain, call (855) 942-4867 before the motor burns out. A footing repair costs less than a new operator.
The gate has probably sagged due to rusted hinges or a shifting post, and the operator is working against the extra friction. A heavy estate gate can easily overload an undersized or aging motor. We’ll check the hinge plates, post alignment, and gate weight, then either re-hang the gate or replace the operator with one matched to the actual load. Call (855) 942-4867 for an inspection – we quote before we work.
Yes. We service and install LiftMaster and FAAC operators on slide and swing gates throughout North Tustin, including custom estate gates. We carry boards, limit switches, gears, and remotes for both brands, and we’re familiar with the specific failures these operators develop on heavy gates and hillside tracks. We’ll diagnose the exact fault and give you a written repair quote before starting any work.
Every automatic gate must have functioning safety devices: photocells or edge sensors that stop and reverse the gate if something is in its path, plus a properly calibrated force limit. North Tustin has many older systems without current UL-compliant safety features. On every repair we check the sensors and force settings, and we’ll recommend upgrades to current standard if yours are non-functional. We won’t leave a gate operating without working safety devices. Call (855) 942-4867 if you’re unsure whether your gate meets current safety standards.
Yes, with limits. A warped wooden gate can sometimes be straightened by re-hanging it on corrected hinges, or we can replace the warped members and re-hang the gate square. But wood gates on North Tustin properties face dry heat, Santa Ana winds, and seasonal moisture shifts – if the posts have moved, no amount of hinge work will fix the problem. We’ll tell you honestly whether repair is worth it or whether a new gate makes more sense. Estimates are free: (855) 942-4867.
Heavy Estate Gates Demand a Specialist
One thing separates North Tustin from most of Orange County: the gates here are big. Long driveway gates, horse-paddock gates, custom steel and ironwork built to match the house. These aren’t the light aluminum gates you see in tract developments. A heavy gate on a hillside with posts that have shifted demands on-site welding, custom alignment, and real knowledge of how operators behave under load. We recently repaired a failing LiftMaster swing gate on a half-acre estate in Cowan Heights where the original 1970s decorative iron gate had sagged because its hinge post was set in decomposed granite. Our tech excavated the post, poured a proper concrete footing, re-aligned the gate, replaced the worn hinges, and installed a new LiftMaster operator with safety photocells. The gate runs silently and evenly now, even after heavy winter rains. If that’s the kind of repair your property needs, we’re the company to call.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving North Tustin.