Gate Repair in Pomona — Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Pomona

Gate repair in Pomona usually means one of three things: a gate that won’t open, a gate that won’t stay closed, or a gate that’s sagging so badly it drags on the concrete. We fix all three, and in most Pomona neighborhoods we can have a technician at your property the same day you call. Riverside Gate Company is a dedicated gate specialist serving Pomona, not a general handyman who happens to own a welder. If your electric gate won’t respond, your hinges have torn out of the post, or a Santa Ana windstorm just ripped your solid wood gate off its frame, call (855) 942-4867 and we’ll get it sorted.

Call (855) 942-4867

Why Riverside Gate Company Is Pomona’s Preferred Gate Repair Company

We work on the brand you have. That matters in Pomona because the housing stock is split, and so is the gate equipment. The 1920s – 1950s bungalows and postwar tract homes in 91766 and 91767 lean toward older manual swing gates, wrought iron, and simple chain-link setups that have been patched, welded, and re-patched for decades. The newer stucco tracts in 91769 run a lot of automatic slide and double-swing operators: LiftMaster, BFT, Linear, Viking, Ghost Controls. Most general repair companies decline jobs that involve control boards or entrapment safety edges. That’s our core work. Neil Dravecky built Riverside Gate Company to be an electric gate repair specialist, and the difference shows on the first call, when the person answering actually understands what “the gate won’t close and the motor just hums” means.

We’re not based in Pomona, but we’re in the eastern San Gabriel Valley constantly, and our response window to the 91766, 91767, and 91769 ZIPs is tight, often same-day for repair calls. You don’t need a contractor who needs to Google your neighborhood. We already know that streets off Holt between Garey and Towne are full of original iron pedestrian gates with hinge posts in expansive clay. We know the newer loops off Phillips Ranch have more automatic slide gates on wider driveways. That local familiarity shortens diagnosis time and keeps your invoice from carrying a learning-curve surcharge.

Driveway Gate Repair in Pomona

Driveway gate repair in Pomona splits into two distinct jobs depending on which side of town you’re in. In the older core of 91766 and 91767, we’re typically wrestling 1950s – 1970s swing gates on wrought-iron or chain-link frames, where the post has shifted in the clay and the gate now scrapes the driveway lip. In 91769, the call is more often a slide gate that won’t travel, or a double-swing with a dead operator. A typical hinge-and-realignment repair in the core runs $180 – $340. A full operator replacement on an automatic driveway gate in 91769 usually lands between $850 and $1,600 installed, depending on the motor and control board.

Hinge and Post Repair

Most driveway gate failures in Pomona start at the post, not the gate. The expansive clay soil around 91766 and 91767 swells when winter rains arrive and shrinks during the long dry stretch from May through October. That movement works hinge posts loose, especially when the post was set shallow in the 1950s. We dig out the footing, re-set the post with proper depth and concrete, and replace the hinges with hardware rated for the actual gate weight.

Gate Realignment and Lock Repair

When a Pomona driveway gate drags or won’t latch, it’s rarely just one thing. Hinges wear oval, the post leans a few degrees, and the latch striker no longer lines up. We correct all three in one visit. For lock repair, we stock common magnetic and mechanical locks for gate systems, including the brands found on most Pomona properties, and we do not pad the ticket by recommending a lock replacement when the existing one can be rebuilt.

Gate Welding in Pomona

Gate welding in Pomona is steady work because of the local climate and the age of the iron out here. Intense summer UV, combined with dry Santa Ana wind events, accelerates rust at every weld joint and hinge barrel. Wrought-iron pedestrian gates on the 91767 streets off Holt and Mission have often been brazed multiple times over the decades, and each previous repair adds stress to the original frame. When we weld in Pomona, we cut out the failed joint entirely, clean the steel, and apply a full-penetration weld, not a surface bead that will crack again next dry season.

Weld and Rust Repair

Surface rust on a Pomona gate isn’t cosmetic. Once the protective coating fails, the gate loses material at the bottom rail first, which is where gate weight concentrates. We grind back to clean steel, weld any thinned or cracked sections, and prime and paint the repair to match. For gates with rust through the lower stile, we’ll tell you honestly whether welding buys another ten years or whether the gate should be replaced.

When Welding Isn’t the Right Call

Sometimes a repaired gate still has a twisted frame or a post too far gone to hold a new weld. In those cases we quote replacement and never push a weld job just to bill the call. The nice thing about working on gates every day is knowing the failure point before we ever strike an arc. Typical gate welding in Pomona runs $150 – $400 per repair location depending on joint access and steel condition.

Trusted Brands We Service in Pomona

We service nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters in Pomona because the city’s gate equipment spans every tier. A Ghost Controls opener on a 91769 stucco tract home is a different animal than a BFT commercial operator on a multi-unit property. We stock common parts for BFT, Linear, Viking, and Ghost Controls, and we can get Pomona customers back in operation fast without waiting on a two-week parts ship. From the motor to the control board, we diagnose and repair the actual failed component instead of quoting a whole-system swap by default.

Common Gate Repair Problems We See in Pomona Homes

• Santa Ana wind damage on solid gates. Solid wood or full metal infill gates in 91766 and 91767 act like sails in a 40-mph gust. We regularly see hinge screws ripped clean out of wood posts that were never rated for that wind load. After a wind event, check whether your gate still closes square or if the hinges have pulled loose.
• Winter rain and expansive clay. When Pomona gets a heavy rain week, water pools around gate posts in the clay soil. The post footing softens, the gate sags a half inch, and it starts binding at the latch. Homeowners often misdiagnose this as a hinge problem when it’s actually a footing problem.
• Stripped rack and pinion gears on slide gates. The automatic slide gates common in 91769 fail when the rack and pinion gear strips or when debris from a Santa Ana event fouls the track. The motor runs, but the gate shudders or stops mid-travel. That’s a repair we handle regularly, and we keep replacement racks on the truck.
• Loop detector false triggers. After windstorms, leaves and debris can sit over the loop detector in a Pomona driveway, causing the gate to open or close on its own or refuse to close at all. Before you call an electrician, check the loop area. If it’s clear and the gate still misbehaves, call us: the board may need a re-tune or replacement.

Pricing for Gate Repair in Pomona, CA

We Also Serve Cities Near Pomona

Riverside Gate Company handles Gate Repair throughout the eastern San Gabriel Valley. If you’re in La Verne, Claremont, Montclair, or Los Serranos, we’re already making the drive and can add you to the route. For anything in Pomona proper, use our Pomona page as your starting point, or call (855) 942-4867 directly and we’ll get you on the schedule.

FAQs About Gate Repair in Pomona