Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across San Bernardino
Gate repair in San Bernardino usually costs between $185 and $520 depending on what failed, and most jobs are done in a single visit. Wind damage from Santa Ana gusts and years of deferred upkeep on older properties are the two biggest reasons gates fail here. We’re a gate-exclusive company based in Riverside, and our technicians know San Bernardino’s housing stock well, from 1940s tract homes in 92404 to newer stucco subdivisions up north. If your gate won’t open, sags, or was bent by the last windstorm, call us at (855) 942-4867. We’ll give you a straight answer and a price before we touch anything.
Why Riverside Gate Company Is San Bernardino’s Preferred Gate Repair Company
We work on gates every day. Not garage doors, not fences. Just gates. That narrow focus matters when you own an automatic system with a control board, safety sensors, and a gearbox that all have to work together. San Bernardino homeowners call us after generalists have already taken a shot and missed. We show up knowing the difference between a LiftMaster swing arm and a Ghost Controls sliding operator, and we carry parts for both.
Our reputation in San Bernardino is built on jobs other companies turn down. A sagging wrought-iron gate from a 1950s home near Perris Hill Park. A chain-link gate bent backward by Santa Ana winds in 92407. A DoorKing operator with a dead control board on a commercial property near Hospitality Lane. Neil Dravecky leads our team, and every job we take on is within our core scope. When we quote a repair in San Bernardino, the price is agreed before work starts. No surprises at the end.
San Bernardino sits at the base of the San Bernardino Mountains, and that geography creates gate problems most repair companies don’t see in other cities. We know what wind does to hinge posts here. We know what decades of dry heat does to wrought iron. That local knowledge means faster diagnosis and fewer return trips. Call (855) 942-4867 and you’ll talk to someone who knows exactly what you’re dealing with.
Styles & brands we work with
Sliding Gate Repair in San Bernardino
Sliding Gate Repair in San Bernardino typically runs $220 – $520, with the most common failures being wheels that have ground down, track misalignment from soil settling, and motors that strain against gates no longer rolling smoothly. The flat lots across much of San Bernardino make sliding gates common on both residential driveways and commercial properties, and when the track shifts even a quarter inch, the whole system fights itself until something breaks.
Track And Wheel Service
Dry summers and occasional winter rain create the kind of soil movement that throws sliding gate tracks out of level. We re-set track sections, replace worn nylon or steel wheels, and re-align the gate so the operator isn’t working against its own weight. If a San Bernardino gate has been scraping or shuddering on the track, this is usually the fix before the motor burns out.
Sliding Gate Operator Replacement
When an older operator on a sliding gate fails, the culprit is usually a control board or a capacitor that’s no longer made. We service newer LiftMaster, FAAC, and BFT operators and can retrofit existing gates with a new operator when the old one is beyond repair. On a sliding gate, we always verify the safety photocells and the reversing function before we leave.
Wrought Iron Gate Repair in San Bernardino
Wrought Iron Gate Repair in San Bernardino usually runs $185 – $450 depending on the extent of rust, hinge damage, and whether welding is needed. A lot of the city’s original wrought-iron gates date from the 1950s and 1960s, and after sixty-plus years of San Bernardino’s dry heat and occasional rain, they need more than paint. We repair, not just patch.
Rust Repair And Weld Strengthening
Rust eats wrought iron from the inside at the joints and hinge barrels. We grind out the corrosion, evaluate whether the remaining steel is structurally sound, and weld reinforcement where needed. In neighborhoods like 92404 and around Base Line Street, we routinely find gates that look fine at a glance but have hinge barrels rotted to paper thickness.
Hinge And Post Refitting
Winter rains erode footing soil, and Santa Ana winds lean on gates until posts shift out of plumb. Straightening a post might work once, but re-setting the footing in concrete is the fix that lasts. We see this constantly on mid-century wrought-iron gates around San Bernardino, and we’ll tell you honestly if a post is too far gone to save.
Trusted Brands We Service in San Bernardino
We work on the brand you have. Our techs carry parts and firmware knowledge for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range covers everything from a DIY-grade Ghost Controls kit on a ranch-style home in 92403 to a commercial DoorKing operator managing traffic at a warehouse near the 215. We stock common control boards, remotes, and safety sensors locally, so we’re not waiting a week on a part that a San Bernardino gate needs today. If your operator is clicking but not moving, or the remote stopped working, call (855) 942-4867 and we’ll tell you over the phone whether it’s likely a simple fix or a full replacement.
Common Gate Repair Problems We See in San Bernardino Homes
- Wind-bent chain-link gates. Santa Ana gusts funnel down from the San Bernardino Mountains and push chain-link frames well past their yield point. We straighten what’s salvageable and replace what isn’t, then re-set the hinge post so it doesn’t happen again.
- Obsolete control boards. Many gates in San Bernardino run on operators installed in the 1990s and early 2000s. When the control board dies, manufacturers no longer make the part, so we retrofit a new operator that fits the existing gate.
- Sagging hinges on mid-century gates. Original wrought-iron gates on 1940s and 1950s homes were built well but not forever. Hinge barrels wear, posts settle, and the gate scrapes the ground. We re-hang and re-foot rather than telling you to replace a gate that has decades of life left.
- Improvised repairs masking deeper damage. Foreclosed and rehabbed properties around San Bernardino often have gates held together with wire, bungee cords, or improvised brackets. By the time we see them, the hinge footing or operator is usually damaged underneath. We fix the real problem, not the symptom.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in San Bernardino, CA
Here’s what you can expect to pay for common gate repairs in San Bernardino:
- Hinge and post repair: $185 – $350 depending on post condition and whether re-footing in concrete is needed.
- Sliding gate track and wheel replacement: $220 – $420 for residential gates, more for commercial spans.
- Wrought iron rust repair and welding: $200 – $450 based on how many joints and hinge points need reinforcement.
- Gate realignment and sag correction: $150 – $300 for most residential swing gates.
- Electric gate repair (motor, control board, sensors): $240 – $520 for parts and labor, with full operator replacement running higher depending on the brand.
These are the ranges we quote in San Bernardino for typical jobs. The exact price depends on the gate’s size, age, and what failed. What won’t change is this: the price is quoted and agreed before any work starts. Call (855) 942-4867 for a free estimate. We’ll come out, look at the gate, and tell you exactly what it costs to fix it. If replacement makes more sense than repair, we’ll tell you that too and explain why.
We Also Serve Cities Near San Bernardino
Riverside Gate Company provides Gate Repair throughout the Inland Empire. We regularly serve Muscoy, Highland, Loma Linda, and Rialto in addition to San Bernardino, so if you’re right at the city line or a property manager with gates in several nearby cities, we can handle them all from one call.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Bernardino
A bent gate can often be straightened if the frame is still structurally sound and the hinge post footing is intact. In the foothill neighborhood of 92407, we recently repaired a chain-link swing gate that had been bent backward by a Santa Ana gust and was being held closed with bungee cords. Our tech replaced the rusted hinge post footing and installed a LiftMaster operator with safety photocells, restoring smooth operation. If the tubing is kinked or the welds are failing, replacement is cheaper than spending hours straightening a frame that will bend again. Call (855) 942-4867 for an honest assessment and a free estimate.
Only if the board is still manufactured and your operator brand still supports it. For many legacy operators installed in San Bernardino in the 1990s and 2000s, the control board is no longer available, which means the economical repair is a full operator retrofit. We’ll check your model, confirm what’s still made, and give you a straight answer on board replacement versus new operator. The price is always agreed before any work begins.
Yes. Automatic gates should have functioning safety photocells and a reversing mechanism that stops the gate if anything is in its path. Older operators in San Bernardino sometimes lack these or have them bypassed. We won’t restore an automatic gate without verifying the safety circuit. That’s a liability we don’t take on, and most insurance companies expect the same.
Tightening hinges can help temporarily, but in San Bernardino the cause is usually the hinge post leaning out of plumb or the footing eroding from winter rains. If the post moves, the gate sags no matter how tight the hinge bolts are. We re-set the post in concrete and re-hang the gate so it closes square and latches without dragging. Call us at (855) 942-4867 and we’ll tell you what’s actually causing the sag.
Absolutely. We see a lot of this in San Bernardino. Foreclosed properties sat neglected for years, and whoever made the gate “work” used whatever was at hand. Bungee cords, wire, improvised brackets. By the time it reaches us, the underlying hinge post or operator is usually damaged. We strip out the improvised fixes, evaluate what’s salvageable, and repair or replace the gate properly so it latches and operates the way it should. Call (855) 942-4867 for a free estimate.
Call Riverside Gate Company for Gate Repair in San Bernardino
If your gate is sagging, bent, stuck, or the operator just clicks, call (855) 942-4867. We work on gates exclusively, across San Bernardino from 92401 to 92407, and we’ll give you a straight diagnosis and a price before any work starts. Most repairs are done in one visit, and the price you’re quoted is the price you pay. Speak with Neil Dravecky’s team today.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving San Bernardino and the Inland Empire.