Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Montclair, CA
Gate installation in Montclair is a different job than it is in most Inland Empire cities, and it starts with the age of the housing stock. Most homes here were built between the 1950s and 1970s, and the gates that came with them are now 50 to 70 years old. We spend far more time rebuilding, reframing, and remounting gates on existing posts and walls than we do hanging brand-new ones on fresh construction. Riverside Gate Company has served Montclair since 2011, and we know what these older tract homes throw at you: rusted wrought iron, warped wood, posts that have heaved out of cracked driveway concrete, and narrow side yards squeezed between block walls. If you need a gate built, repaired, or automated, call (855) 942-4867 and we’ll give you a straight answer.
Why Montclair Homes Are Different
Montclair is a small, fully built-out city where most driveways and side yards were gated decades ago. That means the work here is overwhelmingly repair-and-rebuild on aging, sun-baked metal and wood gates, not new installs on new construction. Because lots are tight and setbacks are small, gates in Montclair are typically narrow, close to the house, and squeezed between block walls. That changes hinge, latch, and alignment work compared with newer, wider-lot cities nearby. We regularly see gates that share a property line with a neighbor’s block wall, and when the wall settles or the post heaves, the gate sags with it. The Inland Empire’s hot, dry summers and intense UV bake exposed metal gates and dry out wood, while winter rain and occasional Santa Ana wind events work the hinges, latches, and posts loose. It’s a cycle of rust, warp, and post-heave that shows up in repair calls across the 91763 zip code. In Montclair’s older tract blocks, a sagging gate frequently means a heaving post or a settling wall, not just a bad hinge, so we look at what the gate is anchored to before we touch the gate itself.
Styles & brands we work with
Our Main Montclair Services
Most Montclair homeowners call us for one of two things: a gate that won’t open or close properly, or an electric gate system that has stopped responding. Both are covered below.
Gate Repair in Montclair
Montclair’s original wrought-iron, chain-link, and wood gates are now rusting, sagging, or failing at welds and hinges, and when a gate binds against a settled block wall or drags across heaving concrete, the fix usually involves the post and the frame, not just the hinge. We cut out rotted or rusted sections, reweld broken joints, reset posts in fresh concrete, and realign the gate so it swings true. For the full scope of what we repair in Montclair, see Gate Repair in Montclair.
Electric Gate Repair in Montclair
Electric gate systems in Montclair combine aging mechanical hardware with control boards, motors, and safety sensors that UV heat and dust don’t do any favors. When a gate won’t open from the remote, reverses mid-travel, or grinds without moving, the cause is usually in the motor, the board, or the limit switch wiring, and we diagnose it down to the component. For the details on what we troubleshoot and repair, see Electric Gate Repair in Montclair.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Montclair
New gate installation in Montclair usually means replacing a gate that has been on the property since the Eisenhower or Nixon administration. The housing stock is largely 1950s to 1970s single-family tract homes plus apartment and condo clusters along the Holt and Foothill corridors, and the original gates are often too rusted, warped, or out of square to be worth saving. The Montclair-specific problem is that the existing posts and surrounding concrete have usually shifted, so a proper installation means addressing the anchors before we ever hang the new gate. If the old gate is failing at the welds and the post is leaning, rebuilding on the same footing just repeats the problem. We frame new gates to fit Montclair’s narrow side yards and driveway openings, set posts to hold up in the Inland Empire’s clay-heavy soil, and build for the UV and heat cycles this area puts metal and wood through every year. For a full breakdown of the installation process and options, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening and closing your gate by hand dozens of times a week and the manual latch is starting to wear, or you’ve had an electric gate before and are done fighting a motor that’s been rebuilt twice.
What it costs in Montclair
Automatic gate installation in Montclair typically runs $1,800 to $6,500 installed, with most residential jobs landing between $2,500 and $4,500.
How we do it
We confirm the gate’s weight and swing or slide path, spec the right operator for the Montclair opening, set and anchor the operator, wire the motor to a dedicated circuit, install the safety edges and photo eyes, and program the remotes and keypad in front of you.
Electric Gate Installation
Signs you need it
You want push-button or remote access on a gate that is currently manual, or the existing electric operator is obsolete, intermittent, or no longer meets current safety sensor requirements.
What it costs in Montclair
Electric gate installation in Montclair typically ranges $1,200 to $5,000 depending on operator grade, gate size, and whether the site needs new conduit or a dedicated circuit.
How we do it
We assess the existing gate weight and post condition, run dedicated power to the operator location, mount the motor and any mast or rack needed, install entrapment protection, and program all remotes, keypads, and access devices before we leave.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rusted through at the bottom rail, dragging on the concrete, or too warped to latch, and rebuilding it on the original posts would be cheaper short-term but fail again within a few years.
What it costs in Montclair
Driveway gate installation in Montclair typically runs $1,500 to $6,000 for a new fabricated gate plus new or reset posts, with automation adding $1,000 to $3,000 on top.
How we do it
We measure the actual opening including any shared wall or property line constraints, fabricate the gate to fit Montclair’s typically narrow driveway widths, set or reset the posts in concrete, hang the gate, and adjust the hinges and latch for a clean swing.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your setback won’t allow a swinging gate to open without hitting a wall, car, or walkway, or you have a wider commercial-style opening that needs a track-mounted slide.
What it costs in Montclair
Sliding gate installation in Montclair typically runs $2,500 to $7,000 for the gate, track or cantilever hardware, and installation, with automation quoted separately based on the operator.
How we do it
We check the grade and available run-off along the fence line, set the track or cantilever posts, hang and balance the gate so it rolls smoothly, and confirm the travel stops and catch posts are solid.
What Gate Installation Costs in Montclair
| Item | Typical range in Montclair |
|---|---|
| Manual gate replacement | $1,200 – $3,500 |
| Electric gate installation | $1,200 – $5,000 |
| Automatic gate installation | $1,800 – $6,500 |
Do I need a permit to install a gate in Montclair?
It depends on the scope. A like-for-like gate replacement that doesn’t change the footprint or add a new electrical circuit usually doesn’t trigger a permit, but new electrical runs for an operator often do. We’ll tell you what applies to your specific job before we start.
Can you install a gate on my existing posts in Montclair?
Sometimes. We’ll only reuse posts that are straight, solid, and set deep enough for the new gate’s weight. In Montclair, where posts are often set shallow in cracked driveway concrete, the honest recommendation is usually to reset them rather than hang a new gate on a failing anchor.
Brands We Service in Montclair
We work on the brand you already have. In Montclair, that most often means FAAC, Linear, Viking, and BFT operators, and we keep common boards, remotes, and safety parts for those lines on our trucks. That cuts turnaround on repairs because we aren’t waiting on a parts delivery to start the job. For the full list of what we service, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Montclair, CA
| Service | Typical range in Montclair |
|---|---|
| Gate repair | $125 – $600 |
| Electric gate repair | $150 – $900 |
| Gate installation (manual) | $1,200 – $3,500 |
| Gate installation (electric) | $1,200 – $5,000 |
| Automatic gate installation | $1,800 – $6,500 |
| Driveway gate installation | $1,500 – $6,000 |
| Sliding gate installation | $2,500 – $7,000 |
| Control board replacement | $250 – $800 |
| Motor replacement | $350 – $1,100 |
| Hinge and weld repair | $150 – $500 |
In Montclair, two things push price upward faster than anything else: posts that have to be dug out of cracked concrete and reset, and electric systems where the wiring has been exposed to decades of UV and heat. Each quote we give is the price you pay, and we confirm it with you in writing before any work begins. Call (855) 942-4867 for a free estimate.
Neighborhoods We Serve in Montclair
We work across all of Montclair’s 91763 zip code, from the older tract streets south of Holt to the newer pockets along the Foothill corridor and the condo and apartment clusters near the 10. Most neighborhoods date to the 1950s through 1970s, so we know the gate styles and post conditions we’ll find before we arrive. Typical first-available scheduling across Montclair is one to three business days, with emergency electric gate faults triaged same-day whenever a gate is stuck closed.
- North Montclair near the 10 freeway
- Neighborhoods along Holt Boulevard
- Tract streets south of Arrow Highway
- Areas along Foothill Boulevard
- Condo and apartment clusters near Central Avenue
Service Area – Cities Near Montclair
Riverside Gate Company is based in Riverside but works all through the western Inland Empire and the Pomona Valley. If you’re just outside the Montclair city line, we regularly serve Claremont, CA, Ontario, CA, Upland, CA, and La Verne, CA. Call (855) 942-4867 and we’ll confirm coverage for your address.
Serving Montclair, CA — Our Local Coverage Area
We’re based in the Montclair area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Montclair
Most non-emergency repairs in Montclair are scheduled within one to three business days. If your gate is stuck closed and blocking your car or leaving the property unsecured, we treat that as a priority and will work you in the same day whenever the schedule allows. Call (855) 942-4867 and we’ll tell you the soonest available slot.
Yes. Montclair has a mix of single-family homes, apartment and condo clusters along the Holt and Foothill corridors, and commercial properties with gated access for security or traffic control. We work on the same brands for both, from entry-level residential operators to commercial-grade FAAC, BFT, and Viking systems.
If you’re in a condo or planned community, the answer is often yes, especially when the gate faces a common area or shared wall. We can walk you through what your HOA will typically ask for, including drawings, materials, and finish, and we’ll match the gate to whatever the board approves.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Montclair Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Bethany Meyer"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Rohan Sharma"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Shannon Fletcher