Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Rubidoux, CA | Riverside Gate Company
We provide independent Ghost Controls gate repair across Rubidoux, and the work here is different because of the ground your gate stands on. Rubidoux’s older fenced properties sit on expansive clay that swells and shrinks through the seasons, which means a Ghost Controls opener is often fighting a post that has crept out of plumb before a single component fails. We diagnose the gate first, then the operator. That’s the difference, and it saves Rubidoux homeowners from paying for boards and motors they never needed. Call (855) 942-4867 when your Ghost Controls system stops behaving.
Why Rubidoux Residents Choose Us for Ghost Controls Service
We work on Ghost Controls systems constantly, so we know the AXS solar swing kits, the slide operators, and the dual swing setups the way a mechanic knows a specific engine. Rubidoux has a particular concentration of these units because Ghost Controls solar kits make sense on fenced lots that were never wired for an operator. Neil Dravecky, our owner, grew up in Riverside off Magnolia Avenue and has spent nearly thirty years troubleshooting gates and automated entry across the Inland Empire. He’s pulled enough dust-caked control boards and binding arms out of Rubidoux gates to know that the unit usually isn’t the villain. Because we’re a dedicated gate company rather than a generalist shop, we stock Ghost Controls compatible batteries, solar accessories, and arms, and we make house calls to Rubidoux without making you explain your gate twice. You can also see our full Ghost Controls sales & service page for the broader picture.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Rubidoux
- Solar charge failures after hot, dusty stretches. Rubidoux summers leave a fine dust film on solar panels, and a battery that’s been baking for three seasons stops holding charge. The opener goes dead, but it’s rarely the control board. We test the panel output, load-test the battery, and clean the charge path before recommending anything expensive.
- Swing arms binding mid-travel during Santa Ana winds. A Ghost Controls arm on a wind-exposed Rubidoux property will trip its obstruction sensing when the gate frame has flexed or the hinges have loosened. The operator is reporting a gate problem, not creating one. We straighten the frame, re-hang the gate, and only touch the opener if it genuinely needs it.
- Openers reversing or stopping short after winter rain. Rubidoux’s clay soil shifts with moisture, and gates set on old concrete footings start to drag. Limit positions in the Ghost Controls board no longer match the gate’s actual travel. We re-plumb the post, reset limits, and the opener usually returns to smooth operation.
- Rusted hinge pins and actuator arms on chain-link and wrought-iron gates. Dry air accelerates corrosion on unpainted hardware, and Rubidoux has a lot of it. Mechanical drag climbs until the motor over-amps and faults. We replace hinges and rollers, free up the travel, and the Ghost Controls unit stops working so hard.
- Keypad and remote sync issues after power interruptions. Solar-charged Ghost Controls systems get finicky about accessory pairing when the battery has been run flat. We re-sync keypads and remotes, and when the accessories are beyond saving we install quality aftermarket units that pair cleanly with the existing board.
Ghost Controls Service in Rubidoux: What Local Conditions Mean for Your Equipment
Here’s the thing most Ghost Controls pages won’t tell you about Rubidoux or nearby Ghost Controls service in Glen Avon: many of these gates were hung on concrete footings poured decades ago, back when the neighborhood was a patchwork of post-war stucco homes and small ranch lots. The soil underneath is expansive clay. It swells when winter rain soaks in, shrinks through the dry inland summer, and every cycle nudges the gate post a little further out of plumb. By the time a homeowner notices the gate dragging or the opener struggling, the post has often moved enough to throw the Ghost Controls limit positions out. A generic repair shop might sell you a new control board. We re-set the post, re-hang the hardware, and then chase whatever’s actually wrong with the operator. If a gate’s giving you trouble, there’s a reason, we just have to find it. Rubidoux makes the reason easier to spot once you know where to look.
Ghost Controls Models & Products We Service in Rubidoux
We service the Ghost Controls Heavy-Duty Single Swing AXS series solar kits, the dual swing gate operator kits, the slide gate operator kits, and the automatic opener kits bundled with keypad and remote accessories. We use OEM Ghost Controls boards, arms, batteries, and solar accessories when the unit needs them, and quality aftermarket hardware for hinges, rollers, and keypads when it’s equal or better. On a 10-year-old operator bolted to a rusted gate that’s already sagging, we’ll tell you straight whether repair makes sense or replacement is the honest call. Rubidoux turnaround stays quick because we keep the common Ghost Controls parts on the truck, not on order.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Rubidoux
Ghost Controls repair in Rubidoux typically runs between $150 and $450 for most mechanical and electrical fixes. A solar battery replacement or arm adjustment lands on the lower end. A control board replacement or post re-set with hinge work lands higher. New Ghost Controls operator installations start around $1,200 to $2,800 depending on the gate size, the power setup, and whether we’re running new wire or converting to solar. Every job gets a written price before we start, and the estimate is free. Call (855) 942-4867 and we’ll tell you what your specific gate needs based on what we find, not what a menu says.
Serving Rubidoux, CA — Our Local Coverage Area
We’re based in the Rubidoux area and know this community well, and we also offer Ghost Controls service in Riverside. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Rubidoux
Usually not. The reversing behavior on a Ghost Controls swing unit in Rubidoux is typically the obstruction sensing reacting to a gate that’s binding on worn hinges, rusted pins, or a post that’s drifted out of plumb. We check the gate travel first before assuming the motor or board is failing. Call (855) 942-4867 and we’ll diagnose it on site rather than guess over the phone.
Because the panel gets filmed with dust and the battery has been cooking in inland heat for too long. Rubidoux summers derate solar charge output, and a weak battery can’t hold the overnight load. We clean the panel, load-test the battery, and replace it when it’s done. A fresh battery and a clean charge path fix most dead-opener calls.
We can repair the operator, but we’ll also address the gate hardware that’s making the operator work against itself. Rusted hinge pins and rollers create drag that over-amps the motor. We replace the worn hardware, smooth the travel, and the Ghost Controls unit usually returns to normal operation without a gate replacement.
In Rubidoux it’s almost always the gate. The clay soil expands when it gets wet, tilting posts and throwing the gate out of alignment. The Ghost Controls opener then reverses or stops because it’s fighting the misalignment, a problem we also see when providing Ghost Controls repair in Highgrove. We re-set the post, re-align the gate, and reset the operator’s limits. The opener was never the problem. For an exact quote on a dragging gate, call (855) 942-4867.
Yes. We repair and replace Ghost Controls keypads and remote accessories, and we handle battery backup integration for solar-charged systems that need to survive Rubidoux’s wind and heat cycles. If the accessory is beyond repair, we install quality aftermarket units that pair cleanly with your existing Ghost Controls board.
Service Areas Near Rubidoux
We run Ghost Controls service calls through Rubidoux and into the surrounding communities. If you’re up the hill in Running Springs or Lake Arrowhead, down toward La Verne, or over by Foothill Ranch and Portola Hills, we can schedule service. We also cover Rubidoux service area work throughout the 92501 ZIP code. For neighbors just outside Rubidoux, see Ghost Controls service in Sunnyslope and Ghost Controls service in Pedley.
Book Your Ghost Controls Service in Rubidoux Today
Your Ghost Controls system is fixable, and usually faster than you think. Call (855) 942-4867 for a free estimate, and we’ll send a gate specialist to your Rubidoux property who knows this brand and this ground. Same-day service is available for urgent repairs.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Rubidoux and the Inland Empire.