Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Irvine
Electric gate repair in Irvine typically runs $180 – $680 depending on whether we’re fixing a control board, a hinge post footing, or replacing an obsolete operator outright. Most Irvine service calls in Woodbridge, Turtle Rock, Northwood, and Great Park neighborhoods get a same-day or next-day visit from our gate-exclusive crew. We stock boards, arms, photocells, and hinge hardware for the brands Irvine homes actually have: LiftMaster, FAAC, Linear, Viking, and BFT. Call (855) 942-4867 and we’ll give you a real diagnosis over the phone before we even roll a truck into your village.
We’re Riverside Gate Company, and we work on gates exclusively. Not garage doors. Not fences. Gates. That focus is why we carry the parts other companies order in, why our technicians can read a FAAC or Linear control board symptom without guesswork, and why Irvine property managers keep our number on file for community gates that have to open every single time. Neil Dravecky built this company around one idea: when a gate fails, the person who shows up should already know what they’re looking at.
Why Riverside Gate Company Is Irvine’s Preferred Electric Gate Repair Company
Irvine is a city of master-planned villages, and every village has its own gate profile. Woodbridge runs heavy on mid-’80s cedar swing gates with LiftMaster operators that predate modern safety standards. Great Park and newer Portola Springs sections skew to aluminum slide gates with FAAC or BFT commercial hardware. Northwood has a mix of both, plus a lot of HOA-managed community gates with Linear operators. We know those inventories because we work them every week.
The reviews from Irvine customers point to the same thing: we show up prepared. A gate repair company that also does garage doors will usually order the control board after the first visit. We carry or can source same-day from local suppliers the specific discontinued and current boards for LiftMaster, Linear, FAAC, and BFT systems found in Irvine’s older villages. That’s the difference between a gate that’s down for one afternoon and one that’s down for two weeks while a part ships from a warehouse in Texas.
Our response time to Irvine is typically same-day for emergency calls received before 2pm, and next-morning for most other service requests. We schedule Irvine jobs in clusters so we’re already in your village when the gate in the next village over needs attention, and that keeps trip charges low and response fast. Neil Dravecky has made Irvine a priority service area because the density of legacy gates here is higher than almost anywhere else in Orange County.
Styles & brands we work with
Commercial Gate Operator in Irvine
A Commercial Gate Operator in Irvine is the work we do for community entry gates, apartment complex vehicle gates, and commercial properties across the city’s business parks and master-planned villages. These jobs involve diagnosing the operator motor, control board, loop detectors, and safety edges as a single integrated system – not just swapping the obvious broken part. Irvine has hundreds of these operators, many installed in the ’90s and early 2000s and now aging out of their manufacturer support cycles.
Commercial gate operator repair in Irvine generally runs $450 – $1,800 depending on whether we’re replacing a loop detector, resurrecting a failing FAAC or BFT board, or installing a full operator replacement when the old unit is beyond economical repair. A complete commercial operator replacement with new safety edges and photocells usually lands between $2,800 and $6,500 in this market. We quote the full number before any work begins.
Community and HOA Gate Systems
Irvine’s HOA-managed communities run a tight mix of Linear, FAAC, BFT, and Viking operators on vehicle gates that see hundreds of cycles a day. When these go down, every resident notices. We prioritize these calls because a failed community gate in Woodbridge or Portola Springs creates a security gap for an entire block, not one home.
Apartment and Business Park Gates
Sliding gates at Irvine apartment complexes and office parks tend to run on heavy-duty FAAC or Viking operators. The common failure we see: the operator still runs, but the gate creeps, reverses mid-cycle, or refuses to close all the way because the loop detector or safety edge has degraded. We repair the system so it holds, not just so it moves.
Gate Opener Repair in Irvine
Gate Opener Repair in Irvine means fixing the motor and drive assembly that actually swings or slides your gate, whether that’s a residential Mighty Mule on a Woodbridge driveway or a BFT hydraulic operator on a commercial slide gate near the Irvine Spectrum. Homeowners usually call us when the gate moves slowly, reverses on its own, makes a grinding noise, or won’t respond to the remote or keypad. The fix often lives in the opener’s motor, gear assembly, or limit switches rather than the gate itself.
Gate opener repair in Irvine typically costs $180 – $520 for residential systems. The lower end covers limit switch adjustments, remote programming, and minor gear work. The higher end covers motor replacement or a full opener swap on a heavy wood gate. Commercial opener repair runs higher, usually $600 – $1,500, because the hardware is heavier and the safety compliance requirements are stricter.
Remote and Receiver Troubleshooting
If your opener runs but the remote only works from ten feet away, or the keypad stopped accepting the code, the problem may not be the opener itself. Aging receiver boards, antenna placement, and keypad corrosion from Irvine’s dry air and occasional marine layer moisture all cause these symptoms. We diagnose the whole signal path, not just the remote.
Limit, Force, and Safety Adjustments
An opener that slams the gate shut or reverses before it reaches the post usually needs force or limit recalibration. Older Irvine gates often haven’t been adjusted since installation. We set the limits, dial the force to the gate’s actual weight, and verify the photocell and safety edge function so the gate meets current safety standards.
Trusted Brands We Service in Irvine
We work on the brand you have. That means BFT hydraulic and electromechanical operators on commercial slide gates, Linear boards and receivers on older Irvine community gates, Viking swing and slide operators on apartment and commercial properties, and Ghost Controls residential openers on newer Irvine driveways. Because we’re gate-exclusive, our trucks carry the boards, remote receivers, and safety edge hardware for these systems when they roll into Irvine neighborhoods, which keeps turnaround tight. If the part is discontinued, we’ll tell you that before we touch a screwdriver, and we’ll give you the cost of retrofitting versus replacing the operator so you can decide with real numbers.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Irvine Homes
- Obsolete control boards on legacy operators. LiftMaster, FAAC, and Linear boards from the ’90s and early 2000s are frequently discontinued, and NOS replacements are getting scarce. When the board fails, we check whether a retrofit board or a full operator replacement is actually the cheaper path over five years of ownership.
- Hinge post and post footing failures. Woodbridge and Turtle Rock gates from the ’70s and ’80s were often hung on posts set without the depth or footing width we’d spec today. The panel looks fine, but the gate drags or sags because the post is moving underground. We fix the footing, not just the hinge.
- Sun-warped and Santa Ana-dried wood panels. Irvine’s inland heat and seasonal winds pull moisture out of wood gates fast. The panel cups, the latch stop misaligns, and the opener starts straining. We find the warp source and correct it with proper bracing or panel replacement matched to the village palette.
- Safety photocell and edge failures on older gates. Gates installed before UL 325 entrapment standards often lack photocells, or the original ones are dead. We retrofit current safety devices so the gate complies with modern requirements and won’t reverse or crush on an obstruction.
Pricing for Electric Gate Repair in Irvine, CA
Here’s what Irvine homeowners and property managers should expect. A diagnostic service call runs $75 – $125, credited toward the repair if you proceed. Control board replacement on a residential opener typically runs $280 – $550. Hinge post repair or footing rebuild on a wood gate lands at $450 – $900. A full residential opener replacement, including new safety photocells, runs $850 – $1,800. Commercial operator work starts at $600 and runs to $6,500 for a full replacement on a community gate. The price we quote is the price you pay, and we agree on the number before any parts are ordered or any work begins. Call (855) 942-4867 for an exact quote for your gate and village.
Key Takeaways:
- Residential electric gate repair in Irvine: $180 – $680
- Commercial operator repair: $450 – $1,800
- Full commercial operator replacement: $2,800 – $6,500
- Diagnostic call: $75 – $125, credited to repair
- Free estimates on full replacements
We Also Serve Cities Near Irvine
Riverside Gate Company serves Electric Gate Repair in Irvine and the surrounding Orange County cities. Our crews regularly run Tustin and North Tustin residential gates, Aliso Viejo community gates, and Santa Ana commercial and apartment operators. If you own a gate in any of these cities and want a gate specialist rather than a generalist, call (855) 942-4867. We likely have a truck in your area already. Learn more about our Electric Gate Repair capability across the region.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Irvine
Yes, in most cases. A gate operator from the ’90s or 2000s can usually accept retrofit safety photocells and edge sensors as long as the control board has input terminals, and in many Irvine villages we’ve retrofitted LiftMaster, Linear, and FAAC operators that predate UL 325 entrapment standards. The retrofit typically costs $200 – $450 per gate including parts and labor. The exceptions are boards so old they lack any safety input, plus operators with failing motors, where replacement becomes the more sensible investment. Call (855) 942-4867 and we’ll tell you which path fits your specific operator.
In most Irvine villages, yes. Woodbridge, Northwood, Turtle Rock, and most other master-planned communities require HOA approval before changing a gate panel, color, material, or style, and many also require it for a full operator swap if the new unit changes the gate’s appearance or footprint. We bring color samples and can match your village’s palette for wood stains and aluminum finishes, and we’ll tell you exactly what to submit to your HOA before we order materials. For a gate repair that doesn’t change appearance, approval is typically not needed, but we’ll confirm with your village’s rules.
The post footing has failed. Those mid-’80s Woodbridge gates were frequently set on shallow or undersized footings, and after forty years of Irvine’s dry-sun and Santa Ana wind cycles, the post has shifted underground. The panel itself is usually fine, which is why homeowners keep tightening hinges and seeing the sag return. We rebuild the footing and reset the post, which in Woodbridge typically runs $450 – $900, and the sag doesn’t return. Call (855) 942-4867 for an inspection, and we’ll show you what’s moving before we propose what to fix.
Sometimes, and this is the honest math we walk every Irvine customer through. If your LiftMaster or Linear board is discontinued and a NOS replacement runs $400 – $600 plus labor, and the opener is also 20 years old with a worn motor, a new residential opener at $850 – $1,800 often makes more sense than repairing a unit that will fail again in a year. We’ll give you both numbers and let you decide. The market in Irvine favors replacement on operators older than roughly 2005, especially on wood gates where modern force-limiting openers are gentler on the panel and post.
Yes, we service commercial and community gates across all of Irvine’s villages, from Woodbridge and Westpark to Portola Springs and Great Park. We carry parts for the FAAC, BFT, Linear, and Viking operators these communities run, and we’re familiar with the safety compliance standards HOAs in Irvine are required to maintain. Commercial gate repair starts at $600, and full operator replacements run $2,800 – $6,500 depending on the gate size, operator type, and whether loop detectors and safety edges need replacement. Call (855) 942-4867 to schedule a site evaluation, and we’ll provide a written quote before any work is scheduled.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Irvine and Orange County since our first gate call here.