Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Ontario, CA
Gate installation in Ontario means working with a specific housing stock: 1950s-60s tract homes near downtown still hold original chain-link and wrought-iron gates, while east-side communities like the 91761 and 91764 ZIP codes have HOAs that demand uniform vinyl and aluminum replacements. Ontario’s triple-digit summers and Santa Ana wind events accelerate sagging, cracking, and hinge wear in ways coastal cities never see. Riverside Gate Company has served Ontario since 2011. We install, repair, and automate gates exclusively, and we carry parts for nine major brands including LiftMaster, FAAC, BFT, and Viking. Call (855) 942-4867 to schedule a free estimate.
Why Ontario Homes Are Different
Ontario sits deep in the Inland Empire, where summer temperatures routinely cross 100°F and Santa Ana winds hammer gates against their stops. That combination does measurable damage: vinyl gates sag and warp in the heat, wood gates crack along the grain, and metal hinges loosen as repeated wind stress works the fasteners. The winters are mild but a few rain events each year leave untreated steel gates rusting at the welds. A gate specialist working Ontario has to diagnose thermal expansion the same way a coastal tech would diagnose salt corrosion.
The housing stock shapes the work too. Homes built in the 1950s and 60s, concentrated around ZIP 91762, often still have their original chain-link or wrought-iron gates with pintle hinges worn oval from sixty years of swing. Those repair jobs are fabrication work: cutting, welding, and reinforcing. The newer stucco subdivisions of the 1980s through 2000s, plus the master-planned communities in 91761 and 91764, lean toward vinyl and aluminum driveway gates that must match HOA-approved colors exactly. We carry color samples for the common HOA specs, and we know which communities require board approval before a replacement gate goes in. The commercial corridor along the 10 and 60 freeways adds a third layer: heavy-duty security gates that need industrial-grade operators and access controls.
Styles & brands we work with
Our Main Ontario Services
Most Ontario homeowners call us for one of two reasons: a gate that won’t open or close properly, or an electric operator that stopped responding to the remote, keypad, or sensor. Both are covered below.
Gate Repair in Ontario
Physical gate repair in Ontario usually means one of three things: a sagging vinyl gate that scrapes the driveway, a rusted steel hinge ready to snap, or a wood gate with cracked rails. In the older downtown neighborhoods, we regularly rebuild original wrought-iron gates whose pintle hinges have worn oval. In the east-side HOAs, we replace faded or cracked vinyl sections to match the rest of the fence line. We work from the motor to the control board, and we quote the full price before any work starts. See Gate Repair in Ontario for detailed local pricing and same-day availability.
Electric Gate Repair in Ontario
When an automatic gate stops responding, the problem is nearly always electrical: a failed control board, a worn capacitor, a misaligned safety sensor, or a motor burned out from fighting a gate that no longer swings freely. Ontario’s Santa Ana winds push gates past their limit switches, which overworks the motor and shortens its life. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most electric gate repairs in Ontario are done same-day. See Electric Gate Repair in Ontario for the full scope.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Ontario
New gate installation in Ontario has to account for the weather and the property era. In the 1950s-60s tract-home neighborhoods around ZIP 91762, many homeowners are replacing the original chain-link gate with a modern steel or aluminum driveway gate. In the east-side HOA communities, installation often means swapping a failed vinyl gate for the exact approved model and color. And along the 10 and 60 freeway corridors, commercial operators need slide gates built for daily traffic and security. We measure, order, fabricate when needed, and handle the full install including automation and safety edges. Visit our Gate Installation page for a complete breakdown of every option we offer.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open the gate, or your current operator has failed and the replacement parts are discontinued.
What it costs in Ontario
Automatic gate installation in Ontario typically runs $1,100 to $2,500 for a complete residential operator and arm installed, with heavier slide-gate operators reaching $6,000 to $10,000 on commercial properties.
How we do it
We mount the operator, run power to the gate, install safety photo eyes and edge sensors, program remotes and keypads, and test full open-close cycles before we call the job done.
Sliding Gate Installation
Signs you need it
Your property has a wide driveway or a commercial entrance where a swing gate would block traffic or require too much clearance.
What it costs in Ontario
Sliding gate installation in Ontario ranges from $7,000 to $25,000 for commercial track systems, while simpler cantilever slide gates run $3,000 to $8,000.
How we do it
We set the track or cantilever rollers, hang the gate panel, mount and wire the slide operator, install safety edges and loop detectors, and fine-tune the open and close speeds.
Driveway Gate Installation
Signs you need it
You want a gate that matches your home and your neighborhood, whether that’s a welded steel driveway gate for a 1960s ranch or a vinyl gate for an HOA street.
What it costs in Ontario
Driveway gate installation in Ontario typically runs $1,500 to $3,500 for a standard single swing gate, with larger double-swing systems from $3,000 to $7,500.
How we do it
We take precise measurements, order or fabricate the gate panel to spec, set posts in concrete, hang the gate on heavy-duty hinges, and adjust the swing for the driveway slope.
What Gate Installation Costs in Ontario
| Item | Typical range in Ontario |
|---|---|
| Standard driveway swing gate (single, installed) | $1,500 – $3,500 |
| Double swing gate with automation | $3,000 – $7,500 |
| Commercial sliding gate system | $7,000 – $25,000 |
Do I need HOA approval before installing a gate in Ontario?
Yes, in most east-side Ontario communities with HOAs, especially ZIPs 91761 and 91764. Many require a specific gate style and color. We can identify the HOA spec and help you submit the right documentation before ordering. Call (855) 942-4867 and we’ll check what your community requires.
How long does a new gate installation take in Ontario?
Most standard residential gate installations finish in one day once the gate panel is on site. Custom fabricated steel or slide gates take longer because the panel is built to order. We’ll give you a written timeline with your estimate. Call (855) 942-4867 to schedule a free measurement.
Brands We Service in Ontario
We carry parts and diagnostic knowledge for the brands Ontario homeowners and property managers actually use: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That spans DIY-grade systems like Mighty Mule up to commercial operators from FAAC and BFT. Most common boards, arms, and sensors are stocked locally, so repairs don’t wait on shipping. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Ontario, CA
| Service | Typical range in Ontario |
|---|---|
| Electric gate diagnostic visit | $89 – $149 |
| Annual gate maintenance | $125 – $175 per visit |
| Standard residential gate operator replacement | $800 – $1,200 |
| Automatic gate operator and arm installation | $1,100 – $2,500 |
| Commercial slide gate operator replacement | $3,000 – $8,000 |
| Driveway gate installation (single swing) | $1,500 – $3,500 |
| Double swing gate with automation | $3,000 – $7,500 |
| Commercial sliding gate system | $7,000 – $25,000 |
Two things push Ontario pricing above the baseline: HOA-mandated replacement of a specific vinyl color (which often means a special order instead of an off-the-shelf panel) and older downtown properties where original steel posts need extra welding or concrete work. In every case, we quote the full price in writing before we start, and the number you approve is the number you pay.
Neighborhoods We Serve in Ontario
We work across all four Ontario ZIP codes, from the older grid streets around downtown 91762 to the HOA communities of 91761 and 91764, and the industrial corridors feeding the 10 and 60 freeways. Our typical response window for gate repair calls in Ontario is within a few hours for urgent failures.
- Downtown Ontario (91762)
- East Ontario and the 91761 corridor
- Archibald Ranch area (91764)
- Commercial and industrial lots along the 10 Freeway
Service Area – Cities Near Ontario
Riverside Gate Company serves Ontario and the surrounding Inland Empire communities. If you’re in Montclair, CA or Upland, CA, we can usually reach you the same day. We also cover Chino, CA and San Antonio Heights, CA for gate repair and installation. Call (855) 942-4867 to confirm your address.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Ontario
For urgent gate failures like a gate stuck open or a motor that won’t respond, we typically arrive within a few hours anywhere in Ontario. Most electric gate repairs are completed same-day because our techs carry the common boards, arms, and safety sensors for LiftMaster, FAAC, Linear, and Viking on the truck. Call (855) 942-4867 and we’ll give you a window.
Yes. Many Ontario HOAs, especially in 91761 and 91764, require specific gate styles, heights, and colors. We know what those communities ask for and can match the approved vinyl or aluminum specs. For older non-HOA neighborhoods in 91762, there are no restrictions beyond standard city setback rules.
We cover all of Ontario’s four ZIP codes, plus Montclair, Upland, Chino, and San Antonio Heights. Our shop is based in Riverside, so we’re on the road to Ontario most days. For a quote or to schedule, call (855) 942-4867 and we’ll confirm coverage for your street.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ontario Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Sofia Martinez"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Jennifer Rhodes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Bethany Meyer