Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Chino, CA
Gate installation in Chino means something different depending on which side of the 71 you’re on. In The Preserve, we’re matching HOA-approved styles and finishes to the letter. In the older ranch neighborhoods of 91710, we’re often replacing 40-year-old tube steel driveway gates that the Santa Ana winds finally finished off. That split is exactly why a gate company works here better than a generalist. We’re Riverside Gate Company, and we’ve served Chino since 2011. Call (855) 942-4867 for a free estimate on any gate job.
Why Chino Homes Are Different
Chino’s gate work follows the age of the house. The Preserve was built mostly after 2010, which sounds new until you realize those automatic gate operators have now been through 15 Chino summers. The heat out here does two things: it cooks control boards inside dark metal housing, and it makes powder coat on steel gates expand and crack enough to let rust start. Then Santa Ana season hits, and a 14-foot gate becomes a sail. Hinges loosen, wheels drag, and the operator strains until it burns out. In 91710, the story is older: ranch properties with long driveways, horse corrals, and gates installed in the 1980s that outlived their electronics by a decade. Many of those gates are welded steel that can’t just be swapped for a Chicago factory panel. They need repair work matched to the original fabrication. That’s normal to us.
Styles & brands we work with
Our Main Chino Services
Most Chino calls start with one of two problems: a gate that physically won’t move right, or a gate whose motor and controls are misbehaving. Here’s how those break down here specifically.
Gate Repair in Chino
Gate repair in Chino ranges from straightening a sagging driveway gate on a 1970s ranch property to replacing rollers and wheels on a Preserve pedestrian gate that’s been dragging since March. The climate means we see loosened hinge welds and warped rails more often than broken pickets. We repair the existing gate whenever the structure is sound, which matters in HOA zones where a full replacement starts an approval cycle. For the full scope, read our Gate Repair in Chino page.
Electric Gate Repair in Chino
When the gate hesitates, reverses, or just sits there humming, we’re checking the operator, the control board, the loops, and the safety edges. Chino heat causes specific failures: swollen capacitors, cracked solder joints, and photo eyes that drift out of alignment as the steel posts move in the sun. We work on everything from Mighty Mule openers on small ranch gates to heavy commercial DoorKing operators on HOA access points. Details are on our Electric Gate Repair in Chino page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Chino
New gate installation in Chino usually falls into two camps. In The Preserve, the job is precision matching: the style, the finish, the exact dimensions the HOA’s architectural committee already signed off on years ago. Get it wrong and the owner is looking at a violation letter. Out in 91710, the job is often about finally getting a long driveway secured with a proper automatic system, sometimes including a new operator, wiring, and safety loops across a wide apron. We install and we automate, so the gate is complete when we leave. Here’s a look at the main installation jobs we do in Chino, and you can find more detail on our Gate Installation hub.
Automatic Gate Installation
Signs you need it
You’re driving 200 feet into a dark driveway every night, or the old operator is starting to sound like a coffee grinder and parts are no longer made for it.
What it costs in Chino
Automatic gate installation in Chino typically runs from $2,800 to $9,000 depending on gate size, operator type, and the length of the power run.
How we do it
We set the gate and posts, mount and wire the operator (liftMaster, Ghost Controls, or a heavier commercial unit if needed), run power, install safety edges and photo eyes, then program remotes and keypads and test full travel and reversal force.
Driveway Gate Installation
Signs you need it
The existing gate sags, rusts through at the hinge welds, or was never sized for a modern SUV and now scrapes on every pass. What it costs in Chino
Driveway gate installation in Chino typically lands between $1,800 and $6,500, with automation adding the cost of the operator and its wiring.
How we do it
We measure the opening and slope, fabricate or order the gate to fit, set posts in concrete, hang and square the gate, and attach hardware that holds up to Chino’s wind load.
Sliding Gate Installation
Signs you need it
Your driveway runs slightly uphill into the property, or the arc of a swinging gate would block the street or the neighbor’s carport.
What it costs in Chino
Sliding gate installation in Chino usually costs $2,500 to $8,000, with the heavier cantilever hardware on long spans pushing toward the top of that range.
How we do it
We pour or anchor the track or use a cantilevered roller system, hang the gate, align the rollers and guides, mount the operator, and set the safety stops and edge sensors.
Electric Gate Installation
Signs you need it
Your property already has a swing gate or opening but no motor, and you’re tired of getting out of the car at midnight to haul a 400-pound gate open by hand.
What it costs in Chino
Adding a fully automatic system to a new or existing gate in Chino typically runs $2,800 to $9,000 including the operator, control box, safety edges, and remotes.
How we do it
We source the right operator for the gate’s weight and use, run conduit and wire, mount everything, and configure the control board for your access points.
What Gate Installation Costs in Chino
| Item | Typical range in Chino |
|---|---|
| Driveway gate (manual) | $1,800 – $6,500 |
| Sliding gate system | $2,500 – $8,000 |
| Automatic/electric gate package | $2,800 – $9,000 |
In The Preserve, the top end is usually about premium finishes and exact HOA matches. In 91710, longer power runs and old driveway concrete that needs trenching push prices up. We quote the full number before we start, and that’s the number you pay.
Do I need HOA approval before installing a gate in The Preserve?
Yes, almost always. The Preserve’s architectural review committee requires that any new gate match the developer’s approved styles and finishes. We can help you spec the gate to those standards before you submit, which saves at least one rejection letter cycle.
How long does a gate installation take in Chino?
Most residential gate installations in Chino take one to two days on site, plus a few days to a couple of weeks if we’re fabricating a custom gate to match an existing Preserve style or an older ranch’s metalwork. We’ll give you a firm timeline with the quote.
Brands We Service in Chino
We work on the brand you have, not the one we’d rather sell you. In Chino that means Ghost Controls on Preserve pedestrian gates, Mighty Mule on ranch driveways, and DoorKing and Elite on HOA and commercial entries. We keep common boards, remotes, and edge sensors stocked so we don’t lose a week waiting on a part. See more on our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Chino, CA
| Service | Typical range in Chino |
|---|---|
| Gate repair service call | $95 – $150 |
| Electric gate repair | $185 – $600+ |
| Control board diagnosis/replacement | $250 – $900 |
| Operator/motor replacement | $600 – $1,800 |
| Hinge or weld repair | $180 – $450 |
| Roller/wheel replacement | $120 – $350 |
| Safety edge or photo eye replacement | $150 – $350 |
| Driveway gate installation | $1,800 – $6,500 |
| Sliding gate installation | $2,500 – $8,000 |
| Automatic gate package | $2,800 – $9,000 |
What pushes Chino prices toward the top of each range is usually age of the existing wiring, longer driveways needing more trenching, and HOA-required finishes that cost more than off-the-shelf. Every quote includes the full line-item total, agreed before work begins, so the only surprise is how quiet the new gate is.
Neighborhoods We Serve in Chino
We cover all of Chino, from the old equestrian streets near Central Avenue up to the newest blocks of The Preserve. We’re local enough that most calls can be scheduled within a day or two, and emergencies get priority when a gate is stuck open or blocking a driveway.
- The Preserve
- College Park
- Ranch-style neighborhoods off Edison Avenue
- Chino’s equestrian-zoned lots
- East Chino near the 71 corridor
Service Area – Cities Near Chino
Our work in Chino puts us within easy reach of the surrounding communities. We also do gate repair and installation for neighbors in Los Serranos, CA, Ontario, CA, Montclair, CA, and Eastvale, CA.
Serving Chino, CA — Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Chino
We serve both Chino ZIP codes, 91708 and 91710. That includes every neighborhood in The Preserve and the older ranch and equestrian properties on the west side. If your property is inside Chino’s city limits, we cover it.
We’ll spec your gate so it matches the community’s approved materials and finishes, and we can provide the technical details the architectural committee asks for. You file the application, but you won’t be guessing at measurements or manufacturer names.
No. Gate repair and installation is all we do. That means the tech who shows up has already diagnosed your exact operator or hinge problem hundreds of times, and the truck carries gate-specific parts rather than a general tool tote.
Call Riverside Gate Company at (855) 942-4867 for a free Chino gate estimate. We’ll tell you what’s wrong, what it costs, and whether repair or replacement is the smarter use of your money.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chino Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Nabil Saleh"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Chris Mercer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— David Wong