Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Fontana
Electric gate repair in Fontana typically runs $185 – $420 for most motor, control board, and hinge repairs, with the majority of jobs completed on the first visit. If your gate is dragging, buzzing, or refusing to open, call us at (855) 942-4867 and we’ll get a technician out to your neighborhood, usually within 48 hours for non-emergency calls and sooner for urgent failures. We know Fontana’s gate stock better than any generalist because that’s all we work on.
Riverside Gate Company is a dedicated gate specialist serving homes and businesses from Bloomington to north Fontana’s 92336 subdivisions. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so when your operator quits, you’re not waiting a week for a part to ship from a warehouse in another state. For a free estimate, call (855) 942-4867.
Why Riverside Gate Company Is Fontana’s Preferred Electric Gate Repair Company
Fontana homeowners call us when a gate won’t budge and the last company they tried said “we don’t really do gates.” That’s the difference. We’re a gate-exclusive company, not a handyman with a truck full of unrelated tools. Neil Dravecky runs this operation with one focus: electric and automatic gate systems, from the motor to the control board.
Our technicians work on gates every day, which means we’ve already seen your exact failure before. A LiftMaster swing arm pulling loose from a corrosion-weakened post in the 92335 zip code? We’ve fixed a dozen of those. A Viking operator tripping its breaker during Santa Ana season? That’s a Tuesday for us. Fontana residents get quick response because our service radius is built around the Inland Empire, not stretched across three counties.
We service all nine major gate automation brands under one roof, which matters when you have a DoorKing commercial operator at work and a Mighty Mule opener on your driveway gate at home. You call one number. One specialist. No subcontracting, no “we’ll send someone who might know gates.”
Styles & brands we work with
Electric Gate Motor in Fontana
Electric gate motor repair in Fontana runs $195 – $390 for most residential jobs, though a full operator replacement with a modern unit climbs to $650 – $1,200 depending on the brand and gate size. When the motor overheats and stops mid-cycle, or you hear a hum but the gate doesn’t move, you’re burning up windings or the capacitor is shot. We replace motors, rebuild swing arms, and swap obsolete operators for modern units with working safety photocells.
Motor Diagnosis on Older Fontana Gates
On 1950s and 1960s tract homes off Sierra and Arrow, the motor often isn’t the root problem, it’s the victim. A rusted bottom rail or a hinge post leaning in aging concrete creates enough drag to strain any operator until it trips or burns out. We fix the alignment and the motor together, because replacing the motor alone just means you’ll replace it again next summer.
Operator Replacement vs. Repair
If your operator predates UL 325 entrapment protection, replacement is usually the honest answer. Older LiftMaster and Linear units from the 1990s don’t have the safety photocells or force-reversal logic required by current code, and retrofitting obsolete control boards rarely costs less than a new operator. We’ll tell you straight when a repair is throwing money at a dead platform.
Call (855) 942-4867 and we’ll diagnose the motor, check the hinges and posts while we’re there, and give you a written quote before any work starts.
Gate Access Control in Fontana
Gate access control repair in Fontana runs $165 – $380 for keypad replacement, receiver wiring, and access panel reprogramming. If your keypad stopped accepting codes, your remote only works from two feet away, or the intercom buzzes but doesn’t release the latch, the problem is in the access control system, not necessarily the gate operator itself. We troubleshoot keypads, receivers, magnetic locks, and telephone entry systems on residential and commercial properties throughout Fontana.
Keypad and Remote Issues in the Inland Empire
Fontana’s summer heat kills keypad membranes. The rubber buttons crack and UV-brittle, letting moisture into the circuit board. We see this constantly on properties in the 92336 subdivisions where builder-grade keypads were installed five or six years ago and now need replacement. We stock compatible keypads for LiftMaster, Linear, DoorKing, and Viking, so the fix is usually same-visit.
Commercial Access Control on Fontana Properties
For property managers running gated parking or controlled entry for tenants, access control is about uptime. A dead receiver at an apartment complex on Sierra Avenue means residents can’t get in and you’re fielding angry calls. We prioritize commercial access failures in Fontana because a broken gate isn’t an inconvenience, it’s a security exposure. We service BFT, FAAC, and DoorKing commercial systems with the brand-specific tools and parts already in the truck.
For access control diagnosis or a full system upgrade estimate, call (855) 942-4867. We’ll quote the work before we start it.
Trusted Brands We Service in Fontana
We work on the brand you have, not the brand we wish you had. In Fontana that usually means a LiftMaster or Linear on a mid-century swing gate, a Mighty Mule or Ghost Controls on a lighter driveway setup, or a BFT and Viking on commercial and higher-end residential systems. Because we stock local parts inventory for these brands within our service area, we’re not waiting on a distributor truck from Los Angeles when your gate is stuck half-open. From the motor to the control board, we service what’s already installed on your property.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Fontana Homes
- Rusted bottom rails on original 1950s steel gates. Decades of landscape irrigation overspray corrodes the bottom rail until the gate structure itself weakens and sags. The motor strains against the added drag and eventually trips its thermal overload or burns out.
- Leaning hinge posts set in aging concrete. Santa Ana winds push hard against swing gates, and a post that was set in 1965 concrete has often been loose for a decade. The gate slips out of latch alignment, the opener fights the misalignment, and you get the classic “gate almost closes then reverses” failure.
- Obsolete operator boards with no entrapment protection. Legacy operators from the 1980s and 1990s predate modern UL 325 safety standards. They lack photocells and force-reversal logic, which is a genuine safety concern on gates that have since been retrofitted or repaired with mismatched parts.
- Builder-grade aluminum gates failing at the self-closing hinges. In north Fontana’s newer 92336 subdivisions, aluminum gates installed by the tract builder tend to fail at the spring-loaded hinges within three to five years, not from rust, but from undersized hardware and constant use. The hinge pin wears out, the gate drops, and the latch no longer aligns.
Pricing for Electric Gate Repair in Fontana, CA
Here’s what Fontana homeowners should expect to pay for common electric gate repairs, based on what we see across ZIPs 92334, 92335, 92336, and 92337:
| Repair Type | Typical Fontana Price Range |
|---|---|
| Electric gate motor repair | $195 – $390 |
| Control board replacement | $220 – $450 |
| Keypad or receiver replacement | $165 – $280 |
| Remote control programming/replacement | $85 – $185 |
| Safety sensor (photocell) repair | $140 – $260 |
| Full operator replacement | $650 – $1,200 |
| Gate sag correction and post reset | $250 – $550 |
Your quote is agreed before we start, so there’s no invoice shock. The exact price depends on your gate’s brand, the condition of the posts and hinges, and whether we’re repairing or replacing the operator. Estimates are free. Call (855) 942-4867 and we’ll give you a line-item price you can hold us to.
We Also Serve Cities Near Fontana
Our Electric Gate Repair service covers Fontana and the surrounding Inland Empire communities, including Bloomington, Rialto, Glen Avon, and Pedley. If you’re in Fontana proper or just outside it in one of these neighboring cities, call us at (855) 942-4867 and we’ll schedule a visit.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Fontana
We service nine gate automation brands in Fontana: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers everything from builder-grade residential openers to commercial-grade operators on multi-unit properties. If your brand is on that list, we have the parts and the training to fix it without guesswork. Call (855) 942-4867 and tell us what’s installed; if it’s one of these nine, we’re your company.
For urgent gate failures we typically reach Fontana homes within 48 hours, often sooner, depending on the day. A gate stuck open or a commercial operator down is a priority call. We’re positioned in the Inland Empire, not across the county, so dispatch times to Fontana neighborhoods are short. Call (855) 942-4867 and we’ll tell you the soonest available slot.
Yes, we cover all four Fontana ZIP codes: 92334, 92335, 92336, and 92337. That includes the older tract-home neighborhoods off Sierra and Arrow, the mid-century subdivisions with block-wall fencing in the center of town, and the newer developments up in north Fontana. Wherever you are in Fontana, we’ve likely already repaired a gate on your street or the next one over.
Fontana’s gate repair costs are actually in line with most Inland Empire markets. What drives the price up on older Fontana properties is not the labor, it’s the condition of the gate. When a 1960s hinge post is leaning in cracked concrete and the bottom rail is rusted through, the job is no longer a simple motor swap, it’s a structural correction plus a motor replacement. On newer north Fontana aluminum gates, repairs are usually cheaper because the failure is a hinge or latch, not a corroded frame. Call (855) 942-4867 for an exact quote for your gate.
Yes, we warranty parts and labor on the repairs we perform, and we’ll state the warranty terms in writing on your quote before work begins. The exact term depends on the repair type and the part. If something we fixed fails under warranty, we come back and make it right without another service charge. For warranty details on your specific repair, call (855) 942-4867.
Written by Neil Dravecky, Owner at Riverside Gate Company, serving Fontana and the Inland Empire.