Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Running Springs
When your gate stops closing in Running Springs, you need a technician who understands mountain conditions, not a generalist trying to figure it out on your driveway. We repair automatic and electric gate systems across Running Springs at roughly 6,000 feet, where freeze-thaw cycles, heavy snow load, and salt and ice take a toll on gates that flatland desert cities never deal with. From the motor to the control board, we diagnose and fix the problem the same visit in most cases. Call (855) 942-4867 for a free estimate, and we’ll send a gate specialist to your property. Our Gate Repair team knows what a Running Springs winter does to wrought iron, redwood, and chain-link systems, because we’ve repaired hundreds of them across the San Bernardino Mountains.
Why Riverside Gate Company Is Running Springs’s Preferred Gate Repair Company
Riverside Gate Company is a dedicated gate company, not a garage door shop that also does gates or a handyman who will give it a try. Gate automation and electric gate repair are all we do. Homeowners, landlords, and property managers in Running Springs call us because we work on the brand you have, whether it is a Mighty Mule on a cabin driveway off Highway 18 or a FAAC commercial operator on a gated mountain property. We service nine gate automation brands including LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, Linear, and Mighty Mule, spanning entry-level residential to commercial systems under one roof.
Running Springs customers repeatedly tell us the same thing: other repair services either decline the job or misdiagnose the problem because they do not work on gates exclusively. We do. Our technicians carry gate-specific parts, motors, control boards, safety edges, and hinge hardware on every truck so we are not making a second trip after ordering a part. For Running Springs, where a disabled gate can mean a snowbound driveway or an unsecured second home, that speed matters. We know the neighborhoods off Rim of the World Highway and the winding drives above Highway 330, and we quote every job upfront before any work begins. Written by Neil Dravecky, Owner at Riverside Gate Company, serving Running Springs and the surrounding mountain communities.
Styles & brands we work with
Wrought Iron Gate Repair in Running Springs
Wrought Iron Gate Repair in Running Springs almost always comes down to what winter did to the steel: shifted posts from frozen ground heave, snapped welds from snow load, and hinges seized with rust from months of road salt and ice. On sloped lots with long driveways, a heavy snowpack sitting against a gate panel adds hundreds of pounds of force, bending top rails and pulling hinge welds apart. We repair, reinforce, and refinish wrought iron gates so they swing true again. A typical wrought iron gate repair in Running Springs runs $320 – $680, depending on whether the post footing needs resetting or we are just realigning hinges and re-welding a cracked joint.
Post Resetting and Concrete Footing Repair
Frozen ground in Running Springs does not move uniformly. One side of a hinge post heaves, the other stays locked in ice, and the gate starts to drag or the latch no longer lines up. We dig down to the footing, reset the post in concrete, and re-anchor it so the gate clears even after spring thaw settles the ground again. This is the single most common repair we handle in Running Springs every March and April.
Weld Crack and Rust Treatment
Snow load flexes wrought iron until fatigue cracks form at the weld points, usually where the hinge plate meets the post or where decorative scrollwork meets the frame. We grind out the cracked weld, TIG weld it with the right rod for the alloy, then apply a cold-weather rated rust inhibitor. For Running Springs gates, we recommend a re-coat every two to three years to stay ahead of the rust.
Metal Gate Repair in Running Springs
Metal Gate Repair in Running Springs covers everything from bent chain-link frames on slope-side enclosures to cracked steel slide gates on rural acreage properties. Running Springs homes built in the 1960s through 1990s often have custom steel or welded pipe gates anchoring retaining walls, and forty years of snow and thaw cycles take their toll. We handle structural repairs, frame straightening, hinge and roller replacement, and reinforcement welding. Most metal gate repairs in Running Springs run $280 – $600, with heavier structural work like replacing a rack-and-pinion gear on a wide slide gate reaching $900 or more.
Structural Repair and Frame Straightening
A wide farm gate or driveway gate that has been pushed by plowed snow banks will twist out of plane, and no amount of operator adjustment will fix that. We brace the gate panel, heat and straighten the frame, and add gussets where the original design was under-built for snow load. The goal is a gate that does not just work today but survives the next heavy winter without warping again.
Slide Gate Track and Roller Replacement
Slide gates on Running Springs properties collect road grit and ice in the track, which grinds down rollers and strips rack-and-pinion gears. When a slide gate starts grinding or shaking mid-run, the roller bearings or the rack gear are already failing. We replace the worn components and set the gate so it travels cleanly without binding when the ground heaves slightly during spring thaw.
Trusted Brands We Service in Running Springs
We work on the brand you have. Our Running Springs customers run FAAC and BFT operators on commercial and estate properties, Viking and Linear on residential gates, and Mighty Mule and Ghost Controls on the mountain cabins and second homes that make up so much of this area. Because gate repair is all we do, we stock motors, control boards, remotes, and safety edges for these brands, which means we can often complete the repair in a single trip to Running Springs instead of ordering parts and coming back. When a Viking operator ice-locks in February or a BFT board burns out after a power surge from a snowstorm, we know exactly what to bring.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Running Springs Homes
- Frozen ground heaves hinge-post footings. At 6,000 feet, Running Springs ground freezes three to four feet down on north-facing lots, and frost heave pushes one hinge post up while the other stays put. The gate starts dragging on the latch side, and we reset the footing in deeper concrete.
- Ice dams seize hinges and operators. Meltwater from the roof drips onto the gate below, freezes over the hinge barrels and operator arm, and the gate either will not move or the motor strips its gear trying. We free and lubricate the affected parts, then recommend a weather hood or heated hinge kit for the worst locations.
- Snow load bends wide gate frames. Driveway gates spanning twelve feet on a mountain lot face serious weight from piled snow, and the frame bows until the gate no longer latches. We straighten and reinforce the frame so it holds its shape under load.
- Power interruptions leave solar openers behind. Many Running Springs homes with long driveways and no practical mains power run solar gate openers, and heavy overcast winter days plus snow cover on the panel drain the battery faster than it charges. We diagnose whether the problem is the panel placement, battery health, or a heavy gate that a solar system simply cannot move.
Pricing for Gate Repair in Running Springs, CA
Here is what Running Springs homeowners and property managers can expect to pay for common gate repairs with Riverside Gate Company. The price you are quoted is the price you pay, agreed before any work starts.
- Hinge and post repair: $240 – $450, depending on whether the post footing needs resetting or the hinge is repairable in place.
- Wrought iron weld repair and reinforcement: $320 – $680 for crack repair, frame straightening, and localized rust treatment.
- Metal gate frame straightening and structural repair: $400 – $900 for wide slide or swing gates twisted from snow load.
- Electric operator motor or control board replacement: $450 – $1,300 depending on brand and whether it is a residential or commercial operator.
- Solar gate opener diagnosis and repair: $180 – $500, with full panel and battery replacement at the higher end.
Every estimate is free. Call (855) 942-4867 and we will give you a written price range before we schedule the visit.
We Also Serve Cities Near Running Springs
Along with Running Springs, our gate specialists cover the neighboring mountain and foothill communities, including Lake Arrowhead, Highland, Mentone, and Crestline. Whether your property is on a canyon-edge lot off Highway 18 or on a wider lot in the foothills below, the same gate-exclusive team handles the call. Call (855) 942-4867 to schedule service anywhere in the Running Springs area.
Serving Running Springs, CA — Our Local Coverage Area
We’re based in the Running Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Running Springs
Frost heave moves your gate posts every spring because Running Springs sits at roughly 6,000 feet, where ground freezes several feet down and thaws unevenly as snow melts. One hinge post rises with the frozen soil while the other stays anchored, so the gate starts dragging or the latch stops aligning. We reset the post in a deeper concrete footing and add drainage so water does not pool at the base and refreeze. Call (855) 942-4867 and we will inspect the footing before the next freeze.
Yes, we repair wide farm gates with solar openers in Running Springs all the time, especially on acreage properties off Highway 18 where running mains power to the gate is impractical. The two challenges specific to this area are snow covering the solar panel and a gate panel heavy enough that the solar battery cannot keep up in winter. We check panel angle, battery capacity, and gate weight, then correct whichever is causing the failure. Call (855) 942-4867 for an on-site assessment.
A sagging wrought-iron gate after winter in Running Springs is almost always a hinge weld that has cracked from snow load or a post that has shifted from frost heave. Snow piled against the gate adds hundreds of pounds of force, and something in the system has to give, usually the top hinge weld or the footing. We re-weld the hinge and reset the post if needed, then realign the gate so it swings level. Call (855) 942-4867 for a free estimate on the repair.
Keep your gate operator working through Running Springs snow and ice by clearing snow away from the gate path, keeping the operator arm and hinge barrels free of ice buildup, and making sure the safety edges are not frozen to the gate face. Meltwater from the roof dripping onto the operator and refreezing is the most common cause of ice-locked gates in this area, so a weather hood or a simple deflection shield above the operator solves many problems. If your operator is already struggling, call (855) 942-4867 before the gear strips.
Automatic gates in Running Springs must meet California safety standards, which require monitored safety edges or photo eyes that reverse the gate when something is in the path, plus warning signage on gates that serve multiple properties. We check every safety device during a repair and will not put a gate back into service if the safety circuit is bypassed or not working. Call (855) 942-4867 and we will confirm your gate meets current requirements.
Written by Neil Dravecky, Owner at Riverside Gate Company, a dedicated gate company serving Running Springs and the San Bernardino Mountains with electric gate repair, automatic gate troubleshooting, and new gate installation.