Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Highland, CA
Riverside Gate Company handles gate installation in Highland, CA for homes built mostly between the 1950s and 1980s, where masonry block walls and original iron gates have spent decades fighting expansive adobe clay. We see the same pattern on nearly every older tract home: hinges that sag, posts that drift, and gates that drag hard every winter after rain saturates the soil. If your gate needs repair, electric troubleshooting, or full replacement, call us at (855) 942-4867. We’re a gate-exclusive company serving Highland since 2011, and we work on the brand you already have.
Why Highland Homes Are Different
Highland sits in the Inland Empire on heavy clay soils that expand and contract dramatically with seasonal moisture. That single fact changes how gate work gets done here. A gate post set in shallow concrete thirty or forty years ago was never engineered for soil that swells after winter rain and bakes hard through summer. In the older tracts off Baseline and along the foothill edges, we routinely find gates that swing freely in June and drag hard in February. The feet of the gate posts shift, the hinges bind, and the whole gate frame twists against itself.
Summer adds a second layer of stress. Highland gets long stretches of triple-digit heat, and Santa Ana winds push coarse dust and grit into roller bearings, hinges, and slide tracks. Metal expands. Powder coating breaks down. Gate hardware that worked fine in March can bind and groan by August. Then the first real rain arrives and the clay swells again, pulling posts out of plumb. Technicians in Highland recognize the cycle: a wave of service calls after every storm, followed by a summer wave of heat-related motor and control board failures on automatic systems. Homeowners here need a gate company that understands both the hardware above ground and the footing below it. That’s the job we do.
Styles & brands we work with
Our Main Highland Services
Most calls from Highland homeowners break down into two categories: a gate that no longer opens or closes correctly by hand, or a gate with a motor and control system that stopped responding. Both live under our roof, and both deserve a specialist who works on gates exclusively.
Gate Repair in Highland
Mechanical gate repair in Highland is usually about hinge hardware and post alignment, not the gate leaf itself. Iron gates on masonry block walls have been exposed to decades of sun and clay movement, so the metal stays intact while the footing shifts underneath it. We reset posts, replace worn hinges, and cut or rehang gates so they swing true. This is also where we see bent frames from wind events that slam unlatched gates against their stops. We cover the mechanical side completely. Get the full scope at Gate Repair in Highland.
Electric Gate Repair in Highland
Electric and automatic gate repair in Highland means diagnosing from the motor to the control board, including sensors, keypads, and remote receivers. Heat accelerates capacitor and transformer failures on older boards, and dust from Santa Ana winds fouls limit switches and photo eyes faster than people expect. We test components before replacing them, because swapping a board when the problem is a $12 limit switch is something a generalist does and a specialist doesn’t. For detail on the electrical side, visit Electric Gate Repair in Highland.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Highland
New gate installation in Highland has to start with what’s under the ground, not what sits on top of it. Most of the original gates in the city’s 1950s-to-1980s tract neighborhoods sit on shallow concrete footings that never accounted for expansive clay, so a replacement that simply reuses the old posts will fail the same way the original did. We dig deeper piers, set posts in properly reinforced concrete, and build the gate so it stays square through wet winters and dry summers. Whether you need a new manual gate or a full electric system with keypad access, we handle the whole job. Visit our Gate Installation hub for the broader process.
Automatic Gate Installation
Signs you need it
You have a new driveway, a pool, or young children, and the manual gate has become a daily negotiation.
What it costs in Highland
A new automatic gate system in Highland typically runs $2,400 to $6,000 installed, depending on gate size and operator, with basic single-swing setups starting around $1,800.
How we do it
We survey the driveway and setbacks, pour deep gate piers for the clay soil, mount the gate leaf and operator, then wire the controls and safety edges before testing the full cycle.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted past welding, piers are leaning, or a new RV or wider vehicle means rebuilding the opening.
What it costs in Highland
Driveway gate installation in Highland usually falls between $2,000 and $5,000 for a single-leaf steel gate, with ornamental or custom sizes running higher.
How we do it
We remove the old gate and posts, drill and pour deeper concrete piers below the clay’s shrink-swell zone, then hang the new gate with adjustable hinges so it stays plumb.
What Gate Installation Costs in Highland
| Item | Typical range in Highland |
|---|---|
| Manual pedestrian gate | $600 – $1,700 |
| Driveway gate (single swing) | $2,000 – $5,000 |
| Automatic gate system (operator + gate) | $2,400 – $6,000 |
Clay-heavy soil and wider driveway setbacks push costs toward the upper end when we need deeper piers or custom gate widths. Every Highland installation gets a written quote before any material is ordered or concrete is poured.
Does a new gate install include the post footings?
Yes. In Highland we always pour new concrete piers for gate posts. Reusing old footings on expansive clay is the fastest way to recreate the sagging gate you just replaced.
Can you install a gate on a 1950s block wall?
Usually. We reinforce the wall column with steel where needed and set the gate post independently so the wall’s movement does not pull the gate out of alignment.
Brands We Service in Highland
We carry service knowledge and common parts for the automatic gate brands Highland homeowners actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have a BFT swing operator or a Linear slide motor, we know the board revisions and the failure points. Ghost Controls and Mighty Mule systems on residential driveways are a regular part of our week. For the full brand list, see our brands. Having the right board or limit switch on the truck usually means one visit, not three.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Highland, CA
| Service | Typical range in Highland |
|---|---|
| Gate hinge replacement | $160 – $360 |
| Gate post reset / re-set in concrete | $280 – $520 |
| Automatic gate motor replacement | $500 – $1,400 |
| Control board diagnostic & repair | $180 – $480 |
| Safety sensor (photo eye) replacement | $150 – $340 |
| Keypad or intercom replacement | $220 – $600 |
| Gate operator full replacement | $900 – $2,500 |
| Manual pedestrian gate | $600 – $1,700 |
| Driveway gate (single swing) | $2,000 – $5,000 |
| Automatic gate system (operator + gate) | $2,400 – $6,000 |
In Highland, the two biggest price drivers are post footings and wire runs. Gates on clay-heavy lots need deeper piers, and a driveway gate set forty feet from the house means a longer trench for power and control wiring, which adds labor. Every repair is quoted and agreed before work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Highland
We work throughout Highland, from the older tracts along Baseline to the newer subdivisions on the east side near the foothills. Our service area covers all of 92346 and the surrounding streets.
- East Highlands
- Highland Historic District
- Base Line corridor
- Foothill areas north of Highland Avenue
- Tracts near Victoria Avenue
Most Highland calls get a same-week visit, and emergency gate failures get priority scheduling.
Service Area – Cities Near Highland
Riverside Gate Company serves Highland and the surrounding Inland Empire communities. If your property is nearby, we cover San Bernardino, CA, Muscoy, CA, Redlands, CA, and Loma Linda, CA with the same gate-exclusive focus and local soil knowledge.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland
For a gate that’s stuck open or a security gate that won’t close, we prioritize Highland calls same-day when the schedule allows, typically within 24 to 48 hours. A stuck-open gate is a real security issue, so we treat it as one.
Most like-for-like gate repairs and replacements don’t require a permit. A new automatic driveway gate with fresh electrical can, depending on the power run and setback. We’ll tell you during the quote if the city’s requirements apply to your job.
Yes. Many Highland subdivisions have design standards for driveway gates and wall-mounted pedestrian gates. We’ve built to HOA specs across the city and can handle the submittal drawings or photo references your management company asks for.
If your gate is sagging, stuck, or just wearing out, call Riverside Gate Company at (855) 942-4867 for a free estimate and a straight answer on what it takes to fix it.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— David Wong"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Ramon Herrera"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Sofia Martinez