Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Bernardino, CA
Gate installation in San Bernardino means working with a housing stock that ranges from 1940s tract homes with original wrought iron to newer stucco subdivisions in the north and east. Riverside Gate Company has served San Bernardino since 2011. We install automatic gate systems, driveway gates, and sliding gates built for the city’s Santa Ana wind season and hot, dry summers. Call (855) 942-4867 for a free estimate on a gate that will actually hold up here.
This page covers everything a San Bernardino property owner needs to know about gate installation, repair, and electric gate work, plus what gate work actually costs in this city.
Why San Bernardino Homes Are Different
San Bernardino sits at the base of the San Bernardino Mountains, and that geography shapes every gate we touch. The Santa Ana winds don’t just blow through this city, they rip down the canyons and bend chain-link gates backward in neighborhoods like the foothills around 92407. A 40 to 60 mph gust turns a loose gate into a sail. Hinges tear out, posts lean, and the gate that worked fine in September is dragging on the driveway by November.
The housing stock adds another layer. Much of San Bernardino was built between the 1940s and 1960s, and a lot of those homes still have the original gate. That means rust, dry rot on wooden posts, sagging hinges, and soil settling that throws posts out of plumb. In ZIP codes like 92404 and 92405, it’s common to find gates that haven’t been adjusted in decades.
Then there’s the foreclosure inventory. San Bernardino absorbed a massive wave of foreclosures in the late 2000s, and many of those properties sat vacant for years. We regularly see gates held together with bungee cords, wire, or improvised brackets. Repairing those isn’t a hinge swap, it’s a rehabilitation job: cutting out rusted sections, setting new posts, re-hanging the gate, and often replacing the hardware entirely.
Winter rains add a quieter problem. Erosion around gate posts causes heaving, which throws the latch out of alignment. A gate that won’t latch isn’t just annoying, it’s a security failure on a property that may already have had issues.
Styles & brands we work with
Our Main San Bernardino Services
When property owners in San Bernardino call us, two jobs dominate the conversation: mechanical gate repair and electric gate repair. Here’s what each involves locally.
Gate Repair in San Bernardino
Gate repair in San Bernardino often starts with a gate that’s sagging, scraping, or won’t close. On older tract homes, the problem is usually rusted hinges, a rotted post, or a gate that has been out of plumb for so long the latch no longer lines up. On foreclosure-rehabbed properties, we frequently find improvised repairs that need to be undone before the real fix can begin. We replace hinges, re-set posts, straighten frames, and repair or replace latches and hardware. Gate Repair in San Bernardino covers the full scope of what we handle. We work on the brand you have, whether that’s a simple manual gate or an automated system.
Electric Gate Repair in San Bernardino
Electric gate repair in San Bernardino means diagnosing problems from the motor to the control board. Wind storms push automatic gates past their travel limits, which burns out motors and strips gears. Summer heat kills control boards, especially units mounted in direct sun on south-facing driveways. We troubleshoot openers, safety loops, photo eyes, keypads, and remote systems. Electric Gate Repair in San Bernardino covers our defined specialty in automatic systems. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we work on the operator you already have.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in San Bernardino
Installing a new gate in San Bernardino means choosing hardware that can survive both wind season and the local housing stock’s age. On post-WWII tract homes in 92401 through 92404, the existing gate is often original to the house, worn past the point where another repair makes sense. On newer stucco subdivisions in the north and east, owners want a gate that matches the home’s architecture and secures the driveway. Either way, we build for this climate: heavy-duty posts, wind-rated hardware, and automatic operators sized for the gate’s weight and exposure. If you’re considering replacing a rusted, sagging gate rather than repairing it again, read our full Gate Installation page for what the process involves. We install automatic and manual gates, and we handle the wiring and access control as part of the job.
Automatic Gate Installation
Signs you need it
Your current gate doesn’t open or close reliably, the motor stalls, or you’re manually pushing a gate that should move on its own.
What it costs in San Bernardino
Automatic gate installation in San Bernardino typically runs $3,000 to $12,000 depending on the operator class, gate size, and whether we’re cutting back concrete or running new power.
How we do it
We set the gate structure, install the operator and brackets, run the wiring, program remotes and keypads, and adjust safety loops and travel limits.
Driveway Gate Installation
Signs you need it
You need to secure a driveway or parking area and want a gate that closes on its own, either for privacy, security, or keeping pets and kids in.
What it costs in San Bernardino
Driveway gate installation in San Bernardino generally falls between $2,500 and $9,000, with the spread driven mostly by gate width and whether the gate is single or double leaf.
How we do it
We measure the opening, pour or extend the pad, set posts in concrete, hang the gate, and then add an operator if the setup is automatic.
Sliding Gate Installation
Signs you need it
Your driveway slopes, your opening is too wide for swing gates, or you want a gate that won’t be caught by Santa Ana winds, which makes sliding a better fit than a swinging leaf.
What it costs in San Bernardino
Sliding gate installation in San Bernardino typically runs $3,500 to $10,000 because it needs a steel track, rollers, a rear support, and often a longer operator run.
How we do it
We pour the track foundation, set the gate and rollers, install the operator and rack, and adjust the limit switches and safety edges.
What Gate Installation Costs in San Bernardino
| Item | Typical range in San Bernardino |
|---|---|
| Manual gate replacement | $1,200 – $4,000 |
| Automatic driveway gate | $3,000 – $9,000 |
| Sliding gate (single leaf) | $3,500 – $10,000 |
What’s the biggest cost driver for gate installation in San Bernardino?
The gate operator itself, followed by concrete work. On older San Bernardino lots, we often have to cut and re-pour part of the driveway to set posts correctly, which adds to the total beyond the gate itself.
Do you handle the electrical work for automatic gates?
Yes. We run the power, install the control board, wire the photo eyes and safety loop, and program the remotes. You don’t need a separate electrician for a gate we install.
Brands We Service in San Bernardino
We repair and install nine gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In San Bernardino we see a lot of Mighty Mule and Ghost Controls units on tract homes and DoorKing or Elite operators on commercial driveways. We carry common parts for these brands in our trucks, which speeds up most San Bernardino repairs. Read more on our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Bernardino, CA
| Service | Typical range in San Bernardino |
|---|---|
| Gate hinge replacement | $150 – $400 |
| Gate post replacement or reset | $500 – $1,200 |
| Latch or lock replacement | $150 – $350 |
| Weld repair (wrought iron or steel) | $200 – $600 |
| Electric gate troubleshooting | $100 – $250 |
| Control board replacement | $350 – $900 |
| Operator motor replacement | $600 – $1,800 |
| Safety loop or photo eye replacement | $250 – $700 |
| Manual gate replacement | $1,200 – $4,000 |
| Automatic driveway gate | $3,000 – $9,000 |
Two things push gate prices up in San Bernardino more than anywhere else: wind damage that bends frames beyond repair and old concrete that needs cutting before a new post can go in. On any job, the price is quoted and agreed before work starts, so the number we give you is the number you pay.
Neighborhoods We Serve in San Bernardino
We work across every San Bernardino ZIP code from 92401 through 92404 and into the foothill areas. We’re usually in the city within one to two business days for repair calls, and emergency gate failures can often be handled faster.
- North Park and the historic core (92401, 92402)
- Delmann Heights and the 92404 tract neighborhoods
- Foothill areas near 92407 and Verdemont
- Northeast stucco subdivisions off Kendall Drive
- Properties along E and W Base Line and Highland Avenue corridors
Service Area – Cities Near San Bernardino
Riverside Gate Company serves San Bernardino and the surrounding Inland Empire. We regularly work in Muscoy, CA, Highland, CA, Loma Linda, CA, and Rialto, CA. If your property sits just outside the city line, call us and we’ll confirm coverage.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Bernardino
For a gate that won’t open or close and is blocking access, we can usually get a technician out the same day or next business day. Standard repair calls are typically scheduled within one to two business days. Call (855) 942-4867 and we’ll give you a straight answer on timing.
In most San Bernardino residential cases, replacing an existing gate with a similar gate doesn’t require a permit. New automatic gates with electrical runs may need a basic electrical permit depending on scope. We can tell you what your specific project requires after seeing the site.
Yes. We work with HOAs and property management companies in San Bernardino on sliding gates, automatic gates, and access control. We service the brands already installed on the property, including DoorKing, FAAC, BFT, and Linear, and we provide straight-forward quotes for repair or replacement. Call (855) 942-4867 for a free estimate on any gate project, from a simple hinge replacement to a complete automatic gate installation.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Bernardino Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Rohan Sharma"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Shannon Fletcher"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Nabil Saleh